Products
-
T4209 Additive package for transmission oils
-
T5022 Anti-wear additive package for hydraulic oils
-
T321Sulfided isobutylene
-
T3259 Additive package for heavy-duty diesel engine oils
-
Zinc salt of dialkyldithiophosphoric acid based on secondary alkyl groups
-
T106D (TBN400) High alkaline synthetic calcium sulfonate based on long chain linear alkylbenzene
-
T205 Zinc salt of dialkyldithiophosphoric acid based on propyl, secondary and primary octyl groups
-
T8556 Organic molybdenum anti-friction additive
-
T161B Borated high molecular weight polyisobutylene succinimide with high viscosity and high nitrogen content
-
T165A High molecular weight polyisobutylene succinimide
-
T109D (TBN360) High alkaline calcium alkyl salicylate
-
T106Z (TBN330) High alkaline synthetic calcium dialkylbenzenesulfonate for lubricants
-
T202 Zinc salt of dialkyldithiophosphoric acid based on primary butyl and octyl groups
-
T104A (TBN25) Synthetic low base number calcium alkyl benzene sulfonate
-
T2007A Polyisobutylene succinic anhydride
-
T106A (TBN300) High alkaline linear alkyl benzene sulfonate calcium
T2022 Additive package for two-stroke engine oils
1、To prepare two-stroke oil of the JASO FC class, only 2.2% (mass fraction when added to the oil) is sufficient - the dosage is highly economical, and bulk purchases allow you to effectively control the costs of the additive package and formulation.
2、Detergency and low smoke, high oil film strength: The product prevents clogging of the motorcycle exhaust system, reduces metal-to-metal wear, and extends engine life without loss of power. Suitable for oil for two-stroke engines with fuel injection and pre-mixing of fuel and oil.
3、Semi-synthetic two-stroke engine oil formulation, prepared with a small amount of polyisobutylene (molecular weight 1000) and a high flash point diluent, provides performance above the requirements of the Japanese JASO FC standard.
Description
marker
Product Description
T2022 is an economical dosage package of additives for motorcycle two-stroke oil. It is intended for the preparation of two-stroke oils for engines with fuel injection and engines with pre-mixed fuel. It has good cleaning properties, low smoke and maintains the strength of the oil film. Promotes clean combustion and minimizes smoke, and at the performance level it prevents clogging of the exhaust system and reduces wear of metal parts.
What is a customer's real concern when purchasing a bulk two-stroke oil additive package?
Finished products made according to the same recipe and with the same dosage show unstable characteristics from batch to batch. End users report heavy smoking, noticeable deposits on the piston and exhaust system, and accelerated wear of metal engine parts; It happens that finished products do not meet JASO FC requirements for performance properties.
Solution
(1) The T2022 additive package has good detergent properties, low smoke and the ability to maintain oil film strength. It controls smoke and deposits at the formulation level, prevents exhaust system clogging and reduces wear between metal surfaces; at a low dosage of 2.2% (mass fraction when introduced into oil) allows you to obtain finished oil of the JASO FC class.
(2) We apply closed production process and intelligent control in all stages; fluctuations of key parameters are kept within ±0.5%, the share of suitable products reaches 99.9%. Before shipment, products are tested for quality indicators, as well as relevant state and corporate standards; test reports are provided along with the batch. The quality of the batch is controlled and traceable.
Specifications
| Indicator | Norm | Test method |
| Density at 15.0 °C, kg/m³ | According to actual measurements | SH/T0604 |
| Flash point (open crucible), °C | Not lower than 180 | GB/T3536 |
| Kinematic viscosity at 100 °C, mm²/s | 81.00–150.0 | GB/T265 |
| Base number (in terms of KOH), mg/g | 105–129 | SH/T0251 |
| Nitrogen (mass fraction), % | 1.39–1.70 | GB/T9170 |
| Calcium (mass fraction),% | 2.59–3.17 | SH/T0270 |
Note:The specific applicable standards, quality indicators and scope of application are determined by the technical data sheet (TDS) and test report supplied with the batch, as well as the results of formulation testing at the customer's site.
Dosage (internal addition method):
| Quality class | Dosage (mass fraction), % |
| JASO FC | 2.2 |
Scope of application
Our additive package is used to prepare two-stroke oils for engines with fuel injection and engines with fuel premixing. Typical applications are two-stroke engine oils for scooters, mopeds and small general purpose engines.
The customer can select the product directly by oil type, engine operating conditions and target performance properties. R&D and technical service teams will provide recommendations on selection, help with adaptation to application and development of individual solutions; Sample testing and trial orders in small batches are possible.
Why choose us?
Our team
We were founded in April 2018; The company has more than 80 employees, including 12 chief engineers and technical specialists, 9 R&D employees and 45 production operators. The technical team has provided services to companies such as Shell, BP, Castrol, Total, CNPC and Sinopec, as well as other domestic and foreign enterprises. We understand the requirements for lubricants and their applications.
Our services
We select a product taking into account operating conditions, oil type and target class. Free technical consultations; commercial offer - within 2-3 working days. Sample production time is 7–10 days; Trial orders in small quantities are possible. Launching an order into production - in 3-5 days, delivery - in 7-10 days; Urgent processing is possible. The warranty period is according to the terms of the contract. We provide remote technical support; in case of controversial issues, the sample is sent to an independent organization for testing and conclusion. We support payment by bank transfer (T/T).
Our logistics and packaging
By default, we use standard export packaging - 200 liter metal drums or tonnage containers (IBC), on pallets, with covers to protect them from shock and moisture. Customized logo, neutral packaging and fumigation-free wooden boxes are available. Labels and packing list are provided with the shipment.
We organize sea, road, rail and multimodal transportation; We can work with the forwarder specified by the client. Shipment - 7-10 days after signing the contract and payment. Delivery to Russia and Central Asia takes about 15–20 days; Express shipping is possible. We provide cargo tracking throughout the journey, transportation insurance and a full set of transport documents, including a bill of lading and waybill.
FAQ
Q1、How to choose the appropriate brand and dosage for your operating conditions?
Answer:The client just needs to indicate the type of oil, target class (for example, JASO FC) and conditions of use - our team will offer a recommended brand and dosage regimen within 2-3 business days. If the brand has not yet been determined, you can first request a test sample.
Q2、Are you a manufacturer or trading company? What is the MOQ?
Answer:We are a manufacturer with our own production workshop and testing equipment. The minimum order is one ton. We invite customers to visit the production.
Q3、Do you support customized formulations and OEM/ODM?
Answer:We can develop a special oil formulation according to customer requirements and offer OEM/ODM services. We will be glad to cooperate.
contact us
Related Popular Products
T5033 Ashless anti-wear additive package for hydraulic oils
1、Ash-free formula based on high-quality anti-wear and ash-free antioxidant additives. Does not contain antifoam additives or viscosity depressants. Optimally suitable for preparing anti-wear hydraulic oils of the HVLP oil class. 2、Designed for high-load conditions: withstands the operation of plunger pumps at pressures above 30.0 MPa and vane pumps at 14.0–17.5 MPa. An ideal complex for the production of high-quality hydraulic oils, including HVLP 46 oils. 3、Easy to use: just add 1.5% of the package to the base oil to obtain a composition that complies with the GB11118.1-94 L-HM standard. Compatible with viscosities from N32 to N100, helping you consistently produce your entire range of HVLP oil-based products.
T5065 Additive package for thermal oils
1、Contains a highly effective antioxidant and metal deactivator in combination with other additives. The package is specially designed for compounding thermal oils with an operating temperature of 250–300 °C: the finished product is distinguished by high thermal-oxidative stability and reliable anti-corrosion protection, and its service life is significantly increased. 2、Recommended dosage is 0.8-2.0%. When using base oils of groups II and III, the input rate can be reduced, which gives coolant oil manufacturers a flexible reserve to optimize the cost of the formulation. 3、Reliable delivery: shipment within 7-10 days after signing the contract and payment; sea, land and rail transportation, as well as multimodal schemes; delivery to Russia and Central Asia - about 15–20 days; Urgent shipment with end-to-end cargo tracking is possible.
T204 Basic zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
1、High pH value. The product is a quality alkaline additive widely used for compounding anti-wear hydraulic oils, mid- and high-grade motor oils, and medium-speed marine oils. 2、Outstanding anti-wear properties. Under conditions of high loads and intense friction, this alkaline oil additive quickly forms a stable protective film, significantly reducing wear on metal surfaces and extending the service life of equipment. 3、Excellent compatibility. As a high-quality alkaline oil additive, the product is easily combined with base mono additives, including extreme pressure sulfur additives, and provides a synergistic effect in transmission and industrial gear oils.
T154A Polyisobutylene succinimide
1、Ashless succinimide additive made from highly reactive polyisobutylene (Mn=1000) using thermal addition technology: the product does not contain chlorine and inhibits the formation of carbon deposits on pistons and varnish deposits. 2、Excellent detergent-dispersant properties: soot, sludge and varnish precursors formed during fuel combustion are kept suspended in the oil, which prevents varnish deposits from settling in the engine on the piston rings, in the oil passages and on the valve mechanism. 3、Suitable for compounding medium and high quality diesel and gasoline motor oils, as well as cylinder oils for low speed crosshead marine engines; especially recommended for environmentally friendly motor oils. The recommended dosage is 2.0–4.0% (by weight).
L135 Di-nonyldiphenylamine
1、High-temperature amine antioxidant with increased resistance: based on diphenylamine, which at high temperatures continuously suppresses the late stage of oxidation of motor oil and lasts longer than conventional bulk-hindered phenols, increasing the oil change interval. 2、Good compatibility and synergistic effect. In combination with other aromatic amines and bulk-hindered phenols, mutual reinforcement occurs, making the product suitable for formulations of premium motor oils, thermal oils, transformer oils and greases. 3、Excellent thermal stability at high temperatures. As an additive for hydraulic oil, it is used in high-temperature hydraulic systems of injection molding machines and steel-casting machines; At the same time, it inhibits the growth of the acid number of transformer oil.
T115B (TBN250) High alkaline sulfided calcium alkyl phenate
1、High acid-neutralizing ability: base number - 245–265 mg KOH/g. The product is used in the manufacture of medium and high-class motor oils, especially turbodiesel, and helps control the formation of carbon deposits on the piston. 2、Recommended dosages are clearly specified: 0.5-4.0% for motor oils and 25-35% for marine cylinder oil (mass fraction). The additive is easily added to the formulation and is compatible with other detergent additives and ashless dispersants. 3、We use a closed technological scheme and intelligent control at all stages of production: fluctuations in key parameters do not exceed ±0.5%, the share of quality products reaches 99.9%. Custom manufacturing (OEM/ODM) and test samples are available.
T106A (TBN300) High alkaline linear alkyl benzene sulfonate calcium
1、High acid-neutralizing ability. In additive formulations for diesel oils, the product is used as a detergent additive; It effectively neutralizes acids and is suitable for the preparation of medium and high-grade motor oils, as well as marine oils. 2、Detergent-dispersant effect and corrosion protection. Products of the T106A line have detergent-dispersant properties and anti-corrosion characteristics in oil systems; they are recommended for formulations of motor and marine oils, which are subject to increased purity requirements. 3、Clear indicators - convenient for recipe mixing. The total alkaline number (in terms of KOH) is 295–310 mg/g, the recommended dosage is 0.5–3.0%; the customer can independently evaluate the introduction of the product based on the base oil and the recipe system.
High molecular weight emulsifier for emulsion explosives
1、The product is based on highly active polyisobutylene succinic anhydride; it is suitable for lines for the production of emulsion explosives of any configuration, characterized by small micelles and good emulsifying ability during use. 2、The emulsion explosives obtained on its basis are water-resistant and acid-resistant, stable during storage and have good pumpability; The recommended dosage is 1.0–2.0%. 3、The finished explosive emulsion is homogeneous and stable; The product is equally suitable for bulk and packaged lines. Production is localized, the supply chain is streamlined, which allows us to find a balance between quality, delivery time and the total cost of purchase.
T321Sulfided isobutylene
1、Excellent extreme durability and anti-wear properties, high sulfur content. Under load, it quickly forms an iron sulfide boundary film, effectively increasing the welding load. 2、Excellent solubility in oils. Suitable not only for all types of gear oils, but also as a high-quality additive in coolant that meets the requirements of heavy cutting conditions. 3、Wide scope of application. The recommended dosage is 1.5–5.0%. The product is widely used in the preparation of medium and high-grade gear oils, anti-friction hydraulic oils and greases; mixing is not difficult.
T161B Borated high molecular weight polyisobutylene succinimide with high viscosity and high nitrogen content
1、Compatible with the formulations of gasoline motor oils of API SG classes and higher, as well as API CF-4 diesel oils and higher; especially in demand in environmentally friendly motor oil formulas. The recommended dosage is 2.0–5.0% (by weight). 2、Effectively inhibits the growth of engine oil viscosity, combines anti-oxidation and anti-wear properties, improves oil compatibility with fluorine rubber seals and reduces high-temperature corrosion of copper-lead liners. The product does not contain chlorine. 3、Own production: five lines with an annual capacity of 60,000 tons, deviation of key parameters - no more than ±0.5%, share of suitable products - 99.9%. We maintain a balance between characteristics, delivery times and the total cost of the purchase.
T106Z (TBN330) High alkaline synthetic calcium dialkylbenzenesulfonate for lubricants
1、Alkalinity number (according to KOH) - not less than 330 mg KOH/g (according to the SH/T 0251 method); The high ability to neutralize acids provides oils and greases with a sufficient supply of alkalinity. 2、Calcium nanocarbonate micelles stabilization technology: after sulfonation, calcium treatment and carbonization, a stable system is formed. The retention of the alkaline number is at least 98%, and the stability of the indicators from batch to batch is ensured at the technology level. 3、Special modification for grease: The product is mainly for the preparation of grease, and can be used in the preparation of high-temperature bearing grease and other greases.
T9100 Additive package for four-stroke engine oils
1、Ready one-step formulation: with a dosage of only 6.5%, the package immediately meets the requirements of API SL and JASO MA2 - engine anti-wear protection and wet clutch friction properties are combined in one composition. 2、A complete set of functional components for recipe tasks. Base number 88.0–108 mg KOH/g; balanced calcium, zinc, phosphorus and nitrogen components provide a synergy of detergent, dispersant, antioxidant and anti-wear effects - the finished product is transparent and clean. 3、Possibility of flexible adjustment of viscosity classes. The package is compatible with non-dispersing viscosity additives and allows you to obtain a wide range of viscosity grades; production is carried out according to the Q/YHT004-2015 standard, each batch undergoes full control with a test report included.
L57 Octylbutyldiphenylamine
1、High anti-oxidation efficiency at high temperatures. Significantly increases the thermal stability of hot oils, effectively inhibits the increase in viscosity in high-quality motor oils and extends the drain interval. 2、Excellent compatibility. In composition with aromatic amines and sterically hindered phenols, it exhibits a synergistic effect. It is a basic component of high-quality additives for hydraulic oils. 3、Excellent high temperature thermal stability. The liquid form is convenient for dosing. Suitable for turbine oils, coolants and other industrial oils, ensuring trouble-free long-term operation of equipment.
T202 Zinc salt of dialkyldithiophosphoric acid based on primary butyl and octyl groups
1、The raw materials and technology are transparent: the product is obtained from thiophosphoric acid, synthesized on the basis of butanol and octanol. It combines antioxidant, anti-wear and anti-corrosion effects and is suitable for motor, transmission and hydraulic oil formulations. 2、The product is suitable for compounding transmission oils and is considered as one of the options when selecting additives for transmission oils; recommended dosage is 0.5–3.0% (by weight). 3、Thermal stability is at a good level: the flash point in an open crucible is not lower than 180 °C, and the content of sulfur, phosphorus and zinc is standardized by clear indicators, which simplifies the selection according to the technical data sheet and the target recipe.
T3358 Additive package for turbine oils
1、Compatible with viscosity grades 5W-30, 5W-40 and others, meets API SN, ILSAC GF-5 and JASO MA2 requirements. This additive package is the optimal solution for effective compounding. 2、At a dosage of 8.5%, it allows you to obtain all-season oils from base oils of groups II and III. As a specialized oil additive package, it has excellent detergent-dispersant properties. 3、Combines detergent additives, ashless dispersants and anti-oxidation/extreme pressure components. This engine oil additive package effectively suppresses the formation of sludge and varnish deposits, extending oil change intervals.
T104A (TBN25) Synthetic low base number calcium alkyl benzene sulfonate
1、Low-alkaline synthetic additives for the production of oils with a high soap content combine detergent, anti-corrosion and anti-foam properties: thanks to the TBN 25 indicator, they are suitable for conventional motor oil formulations, and the finished oil is transparent and has an even light shade. 2、Alkali number - 20.0–35.0 mg/g, flash point - not lower than 180 °C; the product is manufactured according to the corporate standard Q/YHT003-2015 and undergoes full quality control upon leaving the factory - a test report is attached to each batch. 3、Production is localized on our own site with a developed supply chain: five production lines provide an annual capacity of 60,000 tons, which allows us to find a balance between quality, delivery speed and total procurement cost.