Products
-
T4209 Additive package for transmission oils
-
T5022 Anti-wear additive package for hydraulic oils
-
T106Z (TBN330) High alkaline synthetic calcium dialkylbenzenesulfonate for lubricants
-
T321Sulfided isobutylene
-
T165A High molecular weight polyisobutylene succinimide
-
T115B (TBN250) High alkaline sulfided calcium alkyl phenate
-
T205 Zinc salt of dialkyldithiophosphoric acid based on propyl, secondary and primary octyl groups
-
T3358 Additive package for turbine oils
-
T109D (TBN360) High alkaline calcium alkyl salicylate
-
T203 Zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
-
T204 Basic zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
-
T107 (TBN400) Highly alkaline synthetic magnesium sulfonate based on long-chain linear alkylbenzene
-
T106A (TBN300) High alkaline linear alkyl benzene sulfonate calcium
-
L57 Octylbutyldiphenylamine
-
T161B Borated high molecular weight polyisobutylene succinimide with high viscosity and high nitrogen content
-
T8556 Organic molybdenum anti-friction additive
T5065 Additive package for thermal oils
1、Contains a highly effective antioxidant and metal deactivator in combination with other additives. The package is specially designed for compounding thermal oils with an operating temperature of 250–300 °C: the finished product is distinguished by high thermal-oxidative stability and reliable anti-corrosion protection, and its service life is significantly increased.
2、Recommended dosage is 0.8-2.0%. When using base oils of groups II and III, the input rate can be reduced, which gives coolant oil manufacturers a flexible reserve to optimize the cost of the formulation.
3、Reliable delivery: shipment within 7-10 days after signing the contract and payment; sea, land and rail transportation, as well as multimodal schemes; delivery to Russia and Central Asia - about 15–20 days; Urgent shipment with end-to-end cargo tracking is possible.
Description
marker
Product Description
The thermal oil additive package T5065 is based on a highly effective antioxidant and metal deactivator with the addition of other additives and is a brown liquid. The thermal oil prepared on its basis has good thermal-oxidative stability and anti-corrosion properties, due to which the service life of the thermal oil is noticeably increased and the equipment receives reliable protection.
Typical question: why does thermal oil lose its working properties after prolonged operation at high temperatures?
The coolant oil circulates in the circuit for a long time at elevated temperatures, where thermal oxidation reactions inevitably occur. As the product is used, the viscosity increases, the acid number changes, deposits form - all this worsens the operating mode of the heat transfer system and increases the amount of work on cleaning, repairing and changing the oil. For coolant oil manufacturers, the choice of additive package determines not only the initial cost of the formulation, but also the final performance properties of the finished product. If the performance of additives from a new batch does not correspond to the approved recipe, the composition has to be adjusted and the quality must be re-validated.
Our solution
The technical basis of T5065 is a combination of a highly effective antioxidant and metal deactivator: the first slows down oil oxidation, the second suppresses the catalytic effect of active metals on the oxidation process. Acting together, the two components increase thermal-oxidative stability and enhance the anti-corrosion protection of thermal oil.
Specifications
Note:Specific applicable standards, performance and applications are determined by the technical data sheet (TDS), test report supplied with the product, and the results of customer formulation validation.
| Indicator | Typical value | Test method |
| Appearance | Brown liquid | Visual control |
| Density at 20 °C, kg/m³ | Actual value | GB/T1884 |
| Flash point (open crucible), °C | 160 | GB/T3536 |
| Kinematic viscosity at 100 °C, mm²/s | 23 | GB/T265 |
| Nitrogen content, % | 2.1 | SH/T0224 |
| Mechanical impurities,% | 0.09 | GB/T511 |
Applications
(1)Clients and purpose:The product is aimed at oil mixing plants, heat transfer oil producers and users of industrial equipment and is used for compounding thermal oils with an operating temperature of 250–300 °C.
(2)Typical scenarios:industrial heat transfer systems, oil furnaces, reactor coolants and other high temperature coolant oil circuits - the package provides anti-oxidation, anti-corrosion and detergency protection.
(3)Practical value:The antioxidant slows down oxidation and acid number growth at high temperatures, and together with a metal deactivator, it extends the service life of high-temperature thermal oils and protects heating equipment. For continuous duty systems, stable oxidation stability means longer thermal oil change intervals and lower maintenance costs.
About us
The company has been operating since April 2018. Our own production site occupies approximately 46,667 m²: there are five lines for the production of lubricating oil additives with an annual capacity of 60,000 tons, and the range includes more than 40 products.
Our technical team has provided technical services to companies such as Shell, BP, Castrol, Total, CNPC and Sinopec and therefore has extensive knowledge of the products and lubricating oil market requirements.
Production is carried out using hermetic technology with intelligent control of the entire cycle: the deviation of key parameters does not exceed ±0.5%, and the share of suitable products reaches 99.9%.
Service and guarantees
We accompany the client at all stages - from product selection and sample checking to order execution and subsequent technical support.
(1)Product selection:recommendations are selected based on operating parameters, oil type and target characteristics; technical consultation is free.
(2)Quotation and samples:We usually prepare a commercial offer within 2–3 working days; It takes 7-10 days to make samples, we accept trial orders in small quantities.
(3)Order execution:We begin production within 3–5 days, shipment in 7–10 days; If there is an urgent need, the schedule can be accelerated by agreement.
(4)Reception and technical support:Inspection at the factory or by a third party is possible, as well as remote consultations.
(5)Controversial issues regarding quality:the problematic sample is sent to an independent laboratory, responsibility is determined based on the results of the examination and the terms of the contract.
(6)Cooperation format:payment by bank transfer (T/T), volume discounts, cooperation under OEM and ODM schemes - specific conditions are agreed upon by the parties.
Logistics and delivery
Taking into account the needs of customers in the domestic and foreign markets, packaging and logistics schemes are coordinated according to the order volume, delivery point and transportation requirements.
Packing:by default - 200 liter steel barrels or export tank containers; pallets and protective covers protect containers from vibration and moisture. By agreement, it is possible to apply the customer’s logo, neutral packaging and wooden boxes without fumigation; Labels and packing slips are included with the shipment.
Transport:sea, road and rail transport, as well as multimodal schemes; We also work with the forwarder specified by the customer.
Delivery times:shipment usually 7–10 days after signing the contract and payment; Delivery to Russia and Central Asia takes about 15–20 days. Actual timing depends on production schedule, route, customs clearance and carrier plans; urgent requests are discussed in advance.
Documents and tracking:We provide cargo tracking, transportation insurance, bills of lading and waybills; The composition of the documents depends on the type of transport and the conditions of the specific delivery.
Frequently Asked Questions
Q1、What industries are the products applied to?
A:The products are widely used in the oil and gas and chemical industries, primarily for compounding thermal oils with an operating temperature of 250–300 °C. Production is carried out using hermetically sealed technology with intelligent control of the entire process: the deviation of key parameters does not exceed ±0.5%, the share of suitable products reaches 99.9%.
Q2、How to choose a brand for your conditions?
A:It is enough to indicate the type of oil, operating temperature, base oil group and target characteristics - our team will offer a suitable brand within 2-3 business days. If you are unsure about your choice, you can first request samples for testing.
Q3、Are you a manufacturer or trading company? What is the minimum order quantity?
A:We are a manufacturer: we have our own workshops and testing equipment. The minimum order quantity is one ton; We invite you to visit the production.
contact us
Related Popular Products
T2022 Additive package for two-stroke engine oils
1、To prepare two-stroke oil of the JASO FC class, only 2.2% (mass fraction when added to the oil) is sufficient - the dosage is highly economical, and bulk purchases allow you to effectively control the costs of the additive package and formulation. 2、Detergency and low smoke, high oil film strength: The product prevents clogging of the motorcycle exhaust system, reduces metal-to-metal wear, and extends engine life without loss of power. Suitable for oil for two-stroke engines with fuel injection and pre-mixing of fuel and oil. 3、Semi-synthetic two-stroke engine oil formulation, prepared with a small amount of polyisobutylene (molecular weight 1000) and a high flash point diluent, provides performance above the requirements of the Japanese JASO FC standard.
T205 Zinc salt of dialkyldithiophosphoric acid based on propyl, secondary and primary octyl groups
1、The product is synthesized on the basis of thiophosphoric acid obtained from a mixture of primary and secondary alcohols - propyl and octyl: due to the excellent anti-wear properties of the oil and high hydrolytic stability, it is the main additive in gasoline oil for anti-wear and antioxidant protection of high-quality motor oils. 2、The content of sulfur, phosphorus and zinc - 16.00-18.50%, 8.00-9.50% and 9.00-10.80%, respectively - is maintained according to the corporate standard Q/YHT006-2015; Each batch undergoes full control at the exit from the factory, a test report is attached to the delivery, so the lubricating properties of the oil are stable from batch to batch. 3、Multifunctional base anti-wear additive with four functions - anti-oxidation, anti-wear, extreme pressure and anti-corrosion: protects the camshaft, tappets and cylinder liners, and is suitable for compounding high-quality motor oils with additives into gasoline oil.
T104A (TBN25) Synthetic low base number calcium alkyl benzene sulfonate
1、Low-alkaline synthetic additives for the production of oils with a high soap content combine detergent, anti-corrosion and anti-foam properties: thanks to the TBN 25 indicator, they are suitable for conventional motor oil formulations, and the finished oil is transparent and has an even light shade. 2、Alkali number - 20.0–35.0 mg/g, flash point - not lower than 180 °C; the product is manufactured according to the corporate standard Q/YHT003-2015 and undergoes full quality control upon leaving the factory - a test report is attached to each batch. 3、Production is localized on our own site with a developed supply chain: five production lines provide an annual capacity of 60,000 tons, which allows us to find a balance between quality, delivery speed and total procurement cost.
High molecular weight emulsifier for emulsion explosives
1、The product is based on highly active polyisobutylene succinic anhydride; it is suitable for lines for the production of emulsion explosives of any configuration, characterized by small micelles and good emulsifying ability during use. 2、The emulsion explosives obtained on its basis are water-resistant and acid-resistant, stable during storage and have good pumpability; The recommended dosage is 1.0–2.0%. 3、The finished explosive emulsion is homogeneous and stable; The product is equally suitable for bulk and packaged lines. Production is localized, the supply chain is streamlined, which allows us to find a balance between quality, delivery time and the total cost of purchase.
L135 Di-nonyldiphenylamine
1、High-temperature amine antioxidant with increased resistance: based on diphenylamine, which at high temperatures continuously suppresses the late stage of oxidation of motor oil and lasts longer than conventional bulk-hindered phenols, increasing the oil change interval. 2、Good compatibility and synergistic effect. In combination with other aromatic amines and bulk-hindered phenols, mutual reinforcement occurs, making the product suitable for formulations of premium motor oils, thermal oils, transformer oils and greases. 3、Excellent thermal stability at high temperatures. As an additive for hydraulic oil, it is used in high-temperature hydraulic systems of injection molding machines and steel-casting machines; At the same time, it inhibits the growth of the acid number of transformer oil.
T204 Basic zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
1、High pH value. The product is a quality alkaline additive widely used for compounding anti-wear hydraulic oils, mid- and high-grade motor oils, and medium-speed marine oils. 2、Outstanding anti-wear properties. Under conditions of high loads and intense friction, this alkaline oil additive quickly forms a stable protective film, significantly reducing wear on metal surfaces and extending the service life of equipment. 3、Excellent compatibility. As a high-quality alkaline oil additive, the product is easily combined with base mono additives, including extreme pressure sulfur additives, and provides a synergistic effect in transmission and industrial gear oils.
T161B Borated high molecular weight polyisobutylene succinimide with high viscosity and high nitrogen content
1、Compatible with the formulations of gasoline motor oils of API SG classes and higher, as well as API CF-4 diesel oils and higher; especially in demand in environmentally friendly motor oil formulas. The recommended dosage is 2.0–5.0% (by weight). 2、Effectively inhibits the growth of engine oil viscosity, combines anti-oxidation and anti-wear properties, improves oil compatibility with fluorine rubber seals and reduces high-temperature corrosion of copper-lead liners. The product does not contain chlorine. 3、Own production: five lines with an annual capacity of 60,000 tons, deviation of key parameters - no more than ±0.5%, share of suitable products - 99.9%. We maintain a balance between characteristics, delivery times and the total cost of the purchase.
T106D (TBN400) High alkaline synthetic calcium sulfonate based on long chain linear alkylbenzene
1、We use long-chain (C₂₀–₂₄) linear alkylbenzenesulfonic acid as raw materials; The product is suitable for the manufacture of calcium sulfonate grease, has a strong neutralizing ability, as well as detergent-dispersant and anti-corrosion effects. 2、Ultra-high alkaline formula: alkaline number - not lower than 395 mg KOH/g, retention of alkaline number - not less than 98%. Even when operating on high-sulfur fuel, the product contains a sufficient supply of acid neutralization. 3、The main application is medium and high-quality motor oils, as well as marine oils; The recommended dosage is 0.5–25% (mass fraction).
T109D (TBN360) High alkaline calcium alkyl salicylate
1、High base number (340-380 mg KOH/g) and powerful acid neutralization: the product provides alkalinity reserve for heavy diesel oils, oils with extended drain intervals and operating conditions on high sulfur content fuels. 2、Excellent cleaning properties and thermal stability at high temperatures inhibit carbon deposits and varnish deposits on the piston; light color and low viscosity (≤50 mm²/s at 100 °C) simplify the introduction of the product into the formulation. 3、Good oil solubility, compatibility with sulfonates and hydrolytic stability facilitate compounding with other single additives; The product works effectively in combination with an antioxidant additive, extending oil life.
L57 Octylbutyldiphenylamine
1、High anti-oxidation efficiency at high temperatures. Significantly increases the thermal stability of hot oils, effectively inhibits the increase in viscosity in high-quality motor oils and extends the drain interval. 2、Excellent compatibility. In composition with aromatic amines and sterically hindered phenols, it exhibits a synergistic effect. It is a basic component of high-quality additives for hydraulic oils. 3、Excellent high temperature thermal stability. The liquid form is convenient for dosing. Suitable for turbine oils, coolants and other industrial oils, ensuring trouble-free long-term operation of equipment.
T107 (TBN400) Highly alkaline synthetic magnesium sulfonate based on long-chain linear alkylbenzene
1、Low ash content. As a magnesium sulfonate detergent, the product effectively controls oil ash content: with a TBN of at least 395 mg KOH/g, it has excellent acid suppression properties and is an ideal base ingredient for the preparation of low ash oils. 2、Low turbidity and low sediment value: the product significantly reduces the deposition of impurities during oil storage and operation, reducing filtration costs and the risk of equipment clogging. 3、Detergency and corrosion protection: The additive is made from long-chain (C20-24) linear alkylbenzenesulfonic acid and provides good detergent, dispersant and anti-corrosion properties.
T154A Polyisobutylene succinimide
1、Ashless succinimide additive made from highly reactive polyisobutylene (Mn=1000) using thermal addition technology: the product does not contain chlorine and inhibits the formation of carbon deposits on pistons and varnish deposits. 2、Excellent detergent-dispersant properties: soot, sludge and varnish precursors formed during fuel combustion are kept suspended in the oil, which prevents varnish deposits from settling in the engine on the piston rings, in the oil passages and on the valve mechanism. 3、Suitable for compounding medium and high quality diesel and gasoline motor oils, as well as cylinder oils for low speed crosshead marine engines; especially recommended for environmentally friendly motor oils. The recommended dosage is 2.0–4.0% (by weight).
T9100 Additive package for four-stroke engine oils
1、Ready one-step formulation: with a dosage of only 6.5%, the package immediately meets the requirements of API SL and JASO MA2 - engine anti-wear protection and wet clutch friction properties are combined in one composition. 2、A complete set of functional components for recipe tasks. Base number 88.0–108 mg KOH/g; balanced calcium, zinc, phosphorus and nitrogen components provide a synergy of detergent, dispersant, antioxidant and anti-wear effects - the finished product is transparent and clean. 3、Possibility of flexible adjustment of viscosity classes. The package is compatible with non-dispersing viscosity additives and allows you to obtain a wide range of viscosity grades; production is carried out according to the Q/YHT004-2015 standard, each batch undergoes full control with a test report included.
T8556 Organic molybdenum anti-friction additive
1、Energy saving: As a highly effective friction modifier, the product forms a boundary lubricating film on friction surfaces, which can significantly reduce the coefficient of friction, fuel consumption and cylinder wear. 2、Synergy of components: being a high-quality molybdenum additive, the product, when used together with antioxidant and anti-corrosion additives of the ZDDP series, as well as with aromatic amine antioxidants, gives a pronounced synergistic effect in terms of anti-wear and antioxidant properties. 3、Eco-friendly formulation: The product does not contain sulfur and phosphorus, has excellent oil solubility and, as an environmentally friendly molybdenum additive, is suitable for the production of high-quality gasoline and diesel engine oils and environmentally friendly lubricants, fully satisfying the most stringent environmental requirements.
T106A (TBN300) High alkaline linear alkyl benzene sulfonate calcium
1、High acid-neutralizing ability. In additive formulations for diesel oils, the product is used as a detergent additive; It effectively neutralizes acids and is suitable for the preparation of medium and high-grade motor oils, as well as marine oils. 2、Detergent-dispersant effect and corrosion protection. Products of the T106A line have detergent-dispersant properties and anti-corrosion characteristics in oil systems; they are recommended for formulations of motor and marine oils, which are subject to increased purity requirements. 3、Clear indicators - convenient for recipe mixing. The total alkaline number (in terms of KOH) is 295–310 mg/g, the recommended dosage is 0.5–3.0%; the customer can independently evaluate the introduction of the product based on the base oil and the recipe system.
T115B (TBN250) High alkaline sulfided calcium alkyl phenate
1、High acid-neutralizing ability: base number - 245–265 mg KOH/g. The product is used in the manufacture of medium and high-class motor oils, especially turbodiesel, and helps control the formation of carbon deposits on the piston. 2、Recommended dosages are clearly specified: 0.5-4.0% for motor oils and 25-35% for marine cylinder oil (mass fraction). The additive is easily added to the formulation and is compatible with other detergent additives and ashless dispersants. 3、We use a closed technological scheme and intelligent control at all stages of production: fluctuations in key parameters do not exceed ±0.5%, the share of quality products reaches 99.9%. Custom manufacturing (OEM/ODM) and test samples are available.