1、We use long-chain (C₂₀–₂₄) linear alkylbenzenesulfonic acid as raw materials; The product is suitable for the manufacture of calcium sulfonate grease, has a strong neutralizing ability, as well as detergent-dispersant and anti-corrosion effects. 2、Ultra-high alkaline formula: alkaline number - not lower than 395 mg KOH/g, retention of alkaline number - not less than 98%. Even when operating on high-sulfur fuel, the product contains a sufficient supply of acid neutralization. 3、The main application is medium and high-quality motor oils, as well as marine oils; The recommended dosage is 0.5–25% (mass fraction).

1、The raw materials and technology are transparent: the product is obtained from thiophosphoric acid, synthesized on the basis of butanol and octanol. It combines antioxidant, anti-wear and anti-corrosion effects and is suitable for motor, transmission and hydraulic oil formulations. 2、The product is suitable for compounding transmission oils and is considered as one of the options when selecting additives for transmission oils; recommended dosage is 0.5–3.0% (by weight). 3、Thermal stability is at a good level: the flash point in an open crucible is not lower than 180 °C, and the content of sulfur, phosphorus and zinc is standardized by clear indicators, which simplifies the selection according to the technical data sheet and the target recipe.

1、Ashless succinimide additive made from highly reactive polyisobutylene (Mn=1000) using thermal addition technology: the product does not contain chlorine and inhibits the formation of carbon deposits on pistons and varnish deposits. 2、Excellent detergent-dispersant properties: soot, sludge and varnish precursors formed during fuel combustion are kept suspended in the oil, which prevents varnish deposits from settling in the engine on the piston rings, in the oil passages and on the valve mechanism. 3、Suitable for compounding medium and high quality diesel and gasoline motor oils, as well as cylinder oils for low speed crosshead marine engines; especially recommended for environmentally friendly motor oils. The recommended dosage is 2.0–4.0% (by weight).

1、Energy saving: As a highly effective friction modifier, the product forms a boundary lubricating film on friction surfaces, which can significantly reduce the coefficient of friction, fuel consumption and cylinder wear. 2、Synergy of components: being a high-quality molybdenum additive, the product, when used together with antioxidant and anti-corrosion additives of the ZDDP series, as well as with aromatic amine antioxidants, gives a pronounced synergistic effect in terms of anti-wear and antioxidant properties. 3、Eco-friendly formulation: The product does not contain sulfur and phosphorus, has excellent oil solubility and, as an environmentally friendly molybdenum additive, is suitable for the production of high-quality gasoline and diesel engine oils and environmentally friendly lubricants, fully satisfying the most stringent environmental requirements.

1、Contains a highly effective antioxidant and metal deactivator in combination with other additives. The package is specially designed for compounding thermal oils with an operating temperature of 250–300 °C: the finished product is distinguished by high thermal-oxidative stability and reliable anti-corrosion protection, and its service life is significantly increased. 2、Recommended dosage is 0.8-2.0%. When using base oils of groups II and III, the input rate can be reduced, which gives coolant oil manufacturers a flexible reserve to optimize the cost of the formulation. 3、Reliable delivery: shipment within 7-10 days after signing the contract and payment; sea, land and rail transportation, as well as multimodal schemes; delivery to Russia and Central Asia - about 15–20 days; Urgent shipment with end-to-end cargo tracking is possible.

1、Ready one-step formulation: with a dosage of only 6.5%, the package immediately meets the requirements of API SL and JASO MA2 - engine anti-wear protection and wet clutch friction properties are combined in one composition. 2、A complete set of functional components for recipe tasks. Base number 88.0–108 mg KOH/g; balanced calcium, zinc, phosphorus and nitrogen components provide a synergy of detergent, dispersant, antioxidant and anti-wear effects - the finished product is transparent and clean. 3、Possibility of flexible adjustment of viscosity classes. The package is compatible with non-dispersing viscosity additives and allows you to obtain a wide range of viscosity grades; production is carried out according to the Q/YHT004-2015 standard, each batch undergoes full control with a test report included.

1、To prepare two-stroke oil of the JASO FC class, only 2.2% (mass fraction when added to the oil) is sufficient - the dosage is highly economical, and bulk purchases allow you to effectively control the costs of the additive package and formulation. 2、Detergency and low smoke, high oil film strength: The product prevents clogging of the motorcycle exhaust system, reduces metal-to-metal wear, and extends engine life without loss of power. Suitable for oil for two-stroke engines with fuel injection and pre-mixing of fuel and oil. 3、Semi-synthetic two-stroke engine oil formulation, prepared with a small amount of polyisobutylene (molecular weight 1000) and a high flash point diluent, provides performance above the requirements of the Japanese JASO FC standard.

1、The additive is made from high-quality extreme pressure, anti-wear and anti-oxidation components and provides a complex effect: 75w90 gear oil and GL-4 gear oil derived from it under severe operating conditions - high-speed shock loads and high torque - effectively prevent scuffing, wear, pitting and peeling of teeth, as well as their corrosion. 2、Production is carried out using hermetic technology with intelligent control of the entire process: the deviation of key parameters does not exceed ±0.5%, the share of suitable products reaches 99.9%. Before shipment, each batch undergoes full control, a test report is attached to the delivery - the quality is fully controlled and traceable. 3、Products are produced in-house: five production lines provide an annual capacity of 60,000 tons. We accept trial orders, provide volume discounts and work under OEM/ODM schemes - this allows us to offer an individual solution with a balance between characteristics, delivery time and total purchase cost.

1、Ash-free formula based on high-quality anti-wear and ash-free antioxidant additives. Does not contain antifoam additives or viscosity depressants. Optimally suitable for preparing anti-wear hydraulic oils of the HVLP oil class. 2、Designed for high-load conditions: withstands the operation of plunger pumps at pressures above 30.0 MPa and vane pumps at 14.0–17.5 MPa. An ideal complex for the production of high-quality hydraulic oils, including HVLP 46 oils. 3、Easy to use: just add 1.5% of the package to the base oil to obtain a composition that complies with the GB11118.1-94 L-HM standard. Compatible with viscosities from N32 to N100, helping you consistently produce your entire range of HVLP oil-based products.