Products
-
T4209 Additive package for transmission oils
-
L135 Di-nonyldiphenylamine
-
T5033 Ashless anti-wear additive package for hydraulic oils
-
T8556 Organic molybdenum anti-friction additive
-
T106Z (TBN330) High alkaline synthetic calcium dialkylbenzenesulfonate for lubricants
-
T165A High molecular weight polyisobutylene succinimide
-
T104A (TBN25) Synthetic low base number calcium alkyl benzene sulfonate
-
T202 Zinc salt of dialkyldithiophosphoric acid based on primary butyl and octyl groups
-
T5065 Additive package for thermal oils
-
T107 (TBN400) Highly alkaline synthetic magnesium sulfonate based on long-chain linear alkylbenzene
-
T115B (TBN250) High alkaline sulfided calcium alkyl phenate
-
T321Sulfided isobutylene
-
T3259 Additive package for heavy-duty diesel engine oils
-
T2022 Additive package for two-stroke engine oils
-
T109D (TBN360) High alkaline calcium alkyl salicylate
-
T203 Zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
T106D (TBN400) High alkaline synthetic calcium sulfonate based on long chain linear alkylbenzene
1、We use long-chain (C₂₀–₂₄) linear alkylbenzenesulfonic acid as raw materials; The product is suitable for the manufacture of calcium sulfonate grease, has a strong neutralizing ability, as well as detergent-dispersant and anti-corrosion effects.
2、Ultra-high alkaline formula: alkaline number - not lower than 395 mg KOH/g, retention of alkaline number - not less than 98%. Even when operating on high-sulfur fuel, the product contains a sufficient supply of acid neutralization.
3、The main application is medium and high-quality motor oils, as well as marine oils; The recommended dosage is 0.5–25% (mass fraction).
Description
marker
Product Description
T106D (TBN400) is a synthetic detergent additive based on long chain linear alkyl benzene with a high base number, which is used to make calcium sulfonate lubricant. The product is produced using the technology of stabilizing calcium nanocarbonate micelles through sulfonation, calcium treatment and carbonization: as a result, a stable system is formed where calcium sulfonate micelles envelop nanocarbonate particles. Appearance: Red-brown transparent liquid.
Thanks to the long-chain (C₂₀–₂₄) linear alkylbenzenesulfonic acid base, T106D exhibits excellent acid neutralization, combining it with a detergent-dispersant and anti-corrosion effect, and also maintains heat resistance, solubility in oils, low foaming and hydrolytic stability. Base number - not lower than 395 mg KOH/g, shelf life - not less than 98%. The product is manufactured according to the enterprise standard Q/YHT003-2015.
Industry pain points
If the base number turns out to be underestimated, in heavily loaded diesel oils, as well as in system and cylinder lubricants for marine engines running on high-sulfur fuel, acid neutralization will no longer be sufficient: the risk of piston corrosion and carbon formation increases, which can lead to the rejection of an entire batch of finished products and claims from end consumers. An overestimated alkaline number, on the contrary, increases the cost of the recipe. Because of this, buyers have to tighten incoming controls and adjust dosage, and mixing several batches in the warehouse only increases the risk of quality violations and lengthens the inspection and delivery period.
Solution
We ensure the stability of each batch through end-to-end control at our own production: the shipping alkalinity number T106D is in the range of 395–415 mg KOH/g (SH/T0251 method), the deviation of key technological parameters does not exceed ±0.5%, and the share of suitable products reaches 99.9%. Before shipment, full tests are carried out according to state and enterprise standards; along with the batch, the customer receives a test report and technical data (TDS).
Specifications
| Parameter | Indicator | Test method |
| Appearance | Red-brown transparent liquid | Visually |
| Density (20 °C), kg/m³ | 1150.0–1250.0 | SH/T0604 |
| Flash point in open crucible, °C | ≥180 | GB/T3536 |
| Kinematic viscosity (100 °C), mm²/s | 50.0–120.0 | GB/T265 |
| Base number (in terms of KOH), mg KOH/g | 395–415 | SH/T0251 |
| Calcium (mass fraction),% | 14.50–16.00 | Q/YHT003 Appendix B |
| Sulfur (mass fraction), % | 1.20–1.60 | SH/T0303 |
Note:products are manufactured according to the enterprise standard Q/YHT003-2015; recommended dosage is 0.5–25% (mass fraction).
Applications
The product is mainly used for the preparation of medium and high-quality motor oils, as well as marine oils. Among the detergent additives in the group of calcium sulfonate lubricants, T106D stands out for its increased alkalinity reserve:
1、Motor oils: High alkaline calcium sulfonate (TBN 400) is used in heavy-duty diesel oils, diesel oils with extended drain periods and when running on high-sulfur fuels - it provides strong neutralization of acids; low-alkaline calcium sulfonate (TBN 25) is responsible for the detergent and anti-corrosion properties in conventional motor oils.
2、Marine oils: High alkaline long chain calcium alkyl benzene sulfonate is a base component of system and cylinder oils for marine engines and is designed for high sulfur marine fuels.
3、Recommended dosage: 0.5-25% (mass fraction); the exact amount of additive is selected taking into account the properties of the base oil and the results of testing the recipe.
About us
We have been operating since April 2018 and specialize in the development, production and sale of additives for lubricants in the field of fine chemicals. We have our own production area of approximately 46,667 m²: five lines for the production of additives with a total annual capacity of 60,000 tons, which allows us to produce more than 40 types of additives. The company has a staff of over 80 people, including 12 engineers and technical specialists (including the chief engineer), 9 research department employees and 45 production workers.
The company has its own research department, which cooperates with universities and scientific institutes. Our technical experts have already supported companies such as Shell, BP, Castrol, Total, CNPC and Sinopec. We continue to develop new products and improve technologies towards low-ash, energy-efficient and biodegradable formulations; Based on our own development, production and supply chain, we offer domestic and foreign oil manufacturers stable additives with an optimal price-quality ratio and related technical services.
Service and guarantees
1、Pre-sales consultation and technical support:We select a solution for the specific conditions of the customer - operating parameters, medium properties, pressure and temperature ranges, budget - and do not simply issue an invoice according to the catalogue. Free consultations and assessment of drawings; The commercial offer is prepared within 2-3 working days after receiving complete data. Trial samples, low volume orders and OEM/ODM customization are available.
2、After-sales service and warranty:Product warranty period is 3–5 years (specific conditions are fixed in the contract). We provide remote technical support and personnel training, and along with the shipment - technical data (TDS), instructions for use and materials in English or Russian. Spare parts are supplied on an ongoing basis; Disputed products, upon agreement, can be returned for testing in an independent laboratory, and the responsibility of the parties is determined based on their results.
3、Payment and long-term cooperation:Payments are made by bank transfer (T/T). We provide volume discounts to regular customers, distributors and wholesale buyers, conduct regular reviews and promptly offer appropriate modernized solutions when updating products.
Logistics and delivery
1、Packing:Liquid products are by default packaged in 200 liter steel drums or IBC containers as per export standard. Upon request, non-fumigated wooden packaging, neutral packaging or packaging according to customer specifications are available. The outer packaging is completed with a pallet and film - this protects the barrels from displacement, shock and moisture during transportation.
2、Documents and markings:The customer’s logo is applied to the outer packaging; Labels and a packing list are supplied with the batch. Before shipping, we send photographs of the packaging for approval, so that the cargo can be quickly checked upon receipt at the port of destination.
3、Types of transport:sea, land and rail transport are available, as well as multimodal schemes (for example, sea-rail or land-rail) - the combination is selected flexibly based on the destination, required delivery time and budget. We work entirely with forwarders specified by the customer; Urgent shipment is possible.
Questions and answers
Question 1、How to choose a brand for your operating conditions?
Answer:It is enough to indicate the key parameters - type of medium, operating pressure, operating temperature, nominal diameter and installation conditions; Our team will suggest a recommended brand within 2-3 business days. If the choice is in doubt, you can first order a test sample.
Question2、Can lubricants of different brands or different viscosities be mixed?
Answer:Mixing is not recommended. When adding lubricants of different viscosities, an uncontrolled intermediate value is obtained, and the additive systems can conflict with each other. After topping up, you should perform a complete oil change of the same brand as soon as possible. Before switching to another brand of oil, it is recommended to thoroughly flush the system with flushing oil.
Question3、What is the service life of the products and does it meet international standards?
Answer:Service life depends on operating conditions; Under normal conditions, the product lasts for several years. Production is carried out in accordance with state and enterprise standards; before shipment, full tests of properties are carried out with the preparation of protocols; CE, ASME certificates and other documents are provided upon agreement with the customer.
Question4、Are you a manufacturer or trading company? What is the minimum order quantity?
Answer:We are a manufacturer with our own production workshops and testing equipment; The minimum order quantity is one ton. We invite customers to visit the factory.
Question 5、Is it possible to develop custom recipes and cooperate on OEM/ODM?
Answer:Yes, we are ready to develop a special oil formulation for the operating conditions of the customer’s equipment and provide OEM/ODM services. We will be glad to cooperate.
contact us
Related Popular Products
T5033 Ashless anti-wear additive package for hydraulic oils
1、Ash-free formula based on high-quality anti-wear and ash-free antioxidant additives. Does not contain antifoam additives or viscosity depressants. Optimally suitable for preparing anti-wear hydraulic oils of the HVLP oil class. 2、Designed for high-load conditions: withstands the operation of plunger pumps at pressures above 30.0 MPa and vane pumps at 14.0–17.5 MPa. An ideal complex for the production of high-quality hydraulic oils, including HVLP 46 oils. 3、Easy to use: just add 1.5% of the package to the base oil to obtain a composition that complies with the GB11118.1-94 L-HM standard. Compatible with viscosities from N32 to N100, helping you consistently produce your entire range of HVLP oil-based products.
T2022 Additive package for two-stroke engine oils
1、To prepare two-stroke oil of the JASO FC class, only 2.2% (mass fraction when added to the oil) is sufficient - the dosage is highly economical, and bulk purchases allow you to effectively control the costs of the additive package and formulation. 2、Detergency and low smoke, high oil film strength: The product prevents clogging of the motorcycle exhaust system, reduces metal-to-metal wear, and extends engine life without loss of power. Suitable for oil for two-stroke engines with fuel injection and pre-mixing of fuel and oil. 3、Semi-synthetic two-stroke engine oil formulation, prepared with a small amount of polyisobutylene (molecular weight 1000) and a high flash point diluent, provides performance above the requirements of the Japanese JASO FC standard.
T107 (TBN400) Highly alkaline synthetic magnesium sulfonate based on long-chain linear alkylbenzene
1、Low ash content. As a magnesium sulfonate detergent, the product effectively controls oil ash content: with a TBN of at least 395 mg KOH/g, it has excellent acid suppression properties and is an ideal base ingredient for the preparation of low ash oils. 2、Low turbidity and low sediment value: the product significantly reduces the deposition of impurities during oil storage and operation, reducing filtration costs and the risk of equipment clogging. 3、Detergency and corrosion protection: The additive is made from long-chain (C20-24) linear alkylbenzenesulfonic acid and provides good detergent, dispersant and anti-corrosion properties.
T106A (TBN300) High alkaline linear alkyl benzene sulfonate calcium
1、High acid-neutralizing ability. In additive formulations for diesel oils, the product is used as a detergent additive; It effectively neutralizes acids and is suitable for the preparation of medium and high-grade motor oils, as well as marine oils. 2、Detergent-dispersant effect and corrosion protection. Products of the T106A line have detergent-dispersant properties and anti-corrosion characteristics in oil systems; they are recommended for formulations of motor and marine oils, which are subject to increased purity requirements. 3、Clear indicators - convenient for recipe mixing. The total alkaline number (in terms of KOH) is 295–310 mg/g, the recommended dosage is 0.5–3.0%; the customer can independently evaluate the introduction of the product based on the base oil and the recipe system.
T4209 Additive package for transmission oils
1、The additive is made from high-quality extreme pressure, anti-wear and anti-oxidation components and provides a complex effect: 75w90 gear oil and GL-4 gear oil derived from it under severe operating conditions - high-speed shock loads and high torque - effectively prevent scuffing, wear, pitting and peeling of teeth, as well as their corrosion. 2、Production is carried out using hermetic technology with intelligent control of the entire process: the deviation of key parameters does not exceed ±0.5%, the share of suitable products reaches 99.9%. Before shipment, each batch undergoes full control, a test report is attached to the delivery - the quality is fully controlled and traceable. 3、Products are produced in-house: five production lines provide an annual capacity of 60,000 tons. We accept trial orders, provide volume discounts and work under OEM/ODM schemes - this allows us to offer an individual solution with a balance between characteristics, delivery time and total purchase cost.
High molecular weight emulsifier for emulsion explosives
1、The product is based on highly active polyisobutylene succinic anhydride; it is suitable for lines for the production of emulsion explosives of any configuration, characterized by small micelles and good emulsifying ability during use. 2、The emulsion explosives obtained on its basis are water-resistant and acid-resistant, stable during storage and have good pumpability; The recommended dosage is 1.0–2.0%. 3、The finished explosive emulsion is homogeneous and stable; The product is equally suitable for bulk and packaged lines. Production is localized, the supply chain is streamlined, which allows us to find a balance between quality, delivery time and the total cost of purchase.
T205 Zinc salt of dialkyldithiophosphoric acid based on propyl, secondary and primary octyl groups
1、The product is synthesized on the basis of thiophosphoric acid obtained from a mixture of primary and secondary alcohols - propyl and octyl: due to the excellent anti-wear properties of the oil and high hydrolytic stability, it is the main additive in gasoline oil for anti-wear and antioxidant protection of high-quality motor oils. 2、The content of sulfur, phosphorus and zinc - 16.00-18.50%, 8.00-9.50% and 9.00-10.80%, respectively - is maintained according to the corporate standard Q/YHT006-2015; Each batch undergoes full control at the exit from the factory, a test report is attached to the delivery, so the lubricating properties of the oil are stable from batch to batch. 3、Multifunctional base anti-wear additive with four functions - anti-oxidation, anti-wear, extreme pressure and anti-corrosion: protects the camshaft, tappets and cylinder liners, and is suitable for compounding high-quality motor oils with additives into gasoline oil.
T165A High molecular weight polyisobutylene succinimide
1、High molecular weight ashless dispersing agent with a nitrogen content of at least 1.90%: the product is obtained using thermal addition technology, it holds soot and sludge in suspension well, and is especially effective in dispersing low-temperature sludge. 2、Does not contain chlorine, alkaline number is not lower than 40.0 mg KOH/g; is produced according to the corporate standard Q/YHT007-2015 and is suitable for formulations of high-quality gasoline oils of API SH level and higher. 3、Based on highly active polyisobutylene and thermal joining technology: the product copes well with low-temperature sludge and soot, provides good detergent-dispersant efficiency and covers the needs for compounding oils of API SH class and higher.
T109D (TBN360) High alkaline calcium alkyl salicylate
1、High base number (340-380 mg KOH/g) and powerful acid neutralization: the product provides alkalinity reserve for heavy diesel oils, oils with extended drain intervals and operating conditions on high sulfur content fuels. 2、Excellent cleaning properties and thermal stability at high temperatures inhibit carbon deposits and varnish deposits on the piston; light color and low viscosity (≤50 mm²/s at 100 °C) simplify the introduction of the product into the formulation. 3、Good oil solubility, compatibility with sulfonates and hydrolytic stability facilitate compounding with other single additives; The product works effectively in combination with an antioxidant additive, extending oil life.
T161B Borated high molecular weight polyisobutylene succinimide with high viscosity and high nitrogen content
1、Compatible with the formulations of gasoline motor oils of API SG classes and higher, as well as API CF-4 diesel oils and higher; especially in demand in environmentally friendly motor oil formulas. The recommended dosage is 2.0–5.0% (by weight). 2、Effectively inhibits the growth of engine oil viscosity, combines anti-oxidation and anti-wear properties, improves oil compatibility with fluorine rubber seals and reduces high-temperature corrosion of copper-lead liners. The product does not contain chlorine. 3、Own production: five lines with an annual capacity of 60,000 tons, deviation of key parameters - no more than ±0.5%, share of suitable products - 99.9%. We maintain a balance between characteristics, delivery times and the total cost of the purchase.
T151B Borated polyisobutylene succinimide
1、Chlorine-free, ashless borated dispersant: The product has excellent detergent-dispersant ability, combines anti-oxidation and anti-wear properties, and improves oil compatibility with fluorine rubber seals. 2、T151B is used in the compounding of automatic transmission fluids (ATF) and other products, including automatic transmission additives: providing a detergent-dispersant effect, it helps control friction characteristics and reduces high-temperature corrosion of copper-lead liners. 3、Excellent formulation compatibility: In combination with detergent additives, the product is used in marine diesel and industrial oils; Small additives to transmission and hydraulic oils improve control of oxidative deposits during long-term operation.
L135 Di-nonyldiphenylamine
1、High-temperature amine antioxidant with increased resistance: based on diphenylamine, which at high temperatures continuously suppresses the late stage of oxidation of motor oil and lasts longer than conventional bulk-hindered phenols, increasing the oil change interval. 2、Good compatibility and synergistic effect. In combination with other aromatic amines and bulk-hindered phenols, mutual reinforcement occurs, making the product suitable for formulations of premium motor oils, thermal oils, transformer oils and greases. 3、Excellent thermal stability at high temperatures. As an additive for hydraulic oil, it is used in high-temperature hydraulic systems of injection molding machines and steel-casting machines; At the same time, it inhibits the growth of the acid number of transformer oil.
T2007A Polyisobutylene succinic anhydride
1、The product is produced by thermal addition method from highly reactive polyisobutylene (Mn = 1000) and does not contain chlorine; ashless dispersants based on it are distinguished by excellent cleaning properties at high temperatures and good sludge dispersion at low temperatures. 2、This is an intermediate product of the succinic anhydride class, obtained by thermal addition: density 950 kg/m³, flash point 180 °C, kinematic viscosity 800 mm²/s, total acid number 110 mg KOH/g. 3、One product - several directions: based on it, bis-/polyalkenylsuccinimide and borated ashless dispersants are produced, as well as emulsifiers for emulsion explosives and technological additives for petrochemical production.
T9100 Additive package for four-stroke engine oils
1、Ready one-step formulation: with a dosage of only 6.5%, the package immediately meets the requirements of API SL and JASO MA2 - engine anti-wear protection and wet clutch friction properties are combined in one composition. 2、A complete set of functional components for recipe tasks. Base number 88.0–108 mg KOH/g; balanced calcium, zinc, phosphorus and nitrogen components provide a synergy of detergent, dispersant, antioxidant and anti-wear effects - the finished product is transparent and clean. 3、Possibility of flexible adjustment of viscosity classes. The package is compatible with non-dispersing viscosity additives and allows you to obtain a wide range of viscosity grades; production is carried out according to the Q/YHT004-2015 standard, each batch undergoes full control with a test report included.
T5022 Anti-wear additive package for hydraulic oils
1、Meet stringent standards: The product is designed specifically for industrial hydraulic systems and fully meets the oil requirements of DIN 51524 and ISO 11158 standard. This ensures that the resulting oil when mixed has excellent anti-wear and anti-oxidation properties, effectively extending the life of equipment. 2、Versatile application: suitable for injection molding machines, machine tools and industrial hydraulic stations. Whether it is conventional HLP hydraulic oil or high-pressure systems, the product provides reliable protection for pumps and valves, adapting to a variety of severe operating conditions. 3、Flexible Formulation Solutions: We offer customized formulation support for different base oils and viscosity requirements. It can help you easily prepare high-quality HLP oil, effectively reduce your total procurement costs and improve the competitiveness of your blending plant.
T3358 Additive package for turbine oils
1、Compatible with viscosity grades 5W-30, 5W-40 and others, meets API SN, ILSAC GF-5 and JASO MA2 requirements. This additive package is the optimal solution for effective compounding. 2、At a dosage of 8.5%, it allows you to obtain all-season oils from base oils of groups II and III. As a specialized oil additive package, it has excellent detergent-dispersant properties. 3、Combines detergent additives, ashless dispersants and anti-oxidation/extreme pressure components. This engine oil additive package effectively suppresses the formation of sludge and varnish deposits, extending oil change intervals.