Products
-
T203 Zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
-
T9100 Additive package for four-stroke engine oils
-
L135 Di-nonyldiphenylamine
-
T104A (TBN25) Synthetic low base number calcium alkyl benzene sulfonate
-
T109D (TBN360) High alkaline calcium alkyl salicylate
-
T8556 Organic molybdenum anti-friction additive
-
T165A High molecular weight polyisobutylene succinimide
-
T154A Polyisobutylene succinimide
-
T107 (TBN400) Highly alkaline synthetic magnesium sulfonate based on long-chain linear alkylbenzene
-
T5022 Anti-wear additive package for hydraulic oils
-
T115B (TBN250) High alkaline sulfided calcium alkyl phenate
-
T106Z (TBN330) High alkaline synthetic calcium dialkylbenzenesulfonate for lubricants
-
T106A (TBN300) High alkaline linear alkyl benzene sulfonate calcium
-
T321Sulfided isobutylene
-
T5065 Additive package for thermal oils
-
L57 Octylbutyldiphenylamine
High molecular weight emulsifier for emulsion explosives
1、The product is based on highly active polyisobutylene succinic anhydride; it is suitable for lines for the production of emulsion explosives of any configuration, characterized by small micelles and good emulsifying ability during use.
2、The emulsion explosives obtained on its basis are water-resistant and acid-resistant, stable during storage and have good pumpability; The recommended dosage is 1.0–2.0%.
3、The finished explosive emulsion is homogeneous and stable; The product is equally suitable for bulk and packaged lines. Production is localized, the supply chain is streamlined, which allows us to find a balance between quality, delivery time and the total cost of purchase.
Description
marker
Product Description
T101R (THR 101A) is a polymer emulsifier for emulsion explosives, obtained from highly active polyisobutylene succinic anhydride and other starting components; at ordinary temperatures it is a viscous transparent liquid. The product performs the function of emulsification at the boundary of the oil and water phases and serves as a base component in the formation of an explosive emulsion. In the production of emulsion explosives, the preparation of emulsion explosives begins precisely with the stage of emulsifying dispersion of this product; safety measures - see safety data sheet for chemical products.
Customer pain points
When purchasing emulsifier in bulk, the buyer faces the risk of fluctuations in emulsifying ability and shelf life between batches. The production of emulsion explosives places high demands on the uniformity of the explosive emulsion: if key indicators such as micelle size and emulsifying ability “float” in incoming batches, an explosive emulsion prepared according to the same recipe may collapse or separate, and its shelf life may be reduced.
Solution
The production uses hermetic technology with intelligent control of the entire cycle: fluctuations in key parameters do not exceed ±0.5%, the share of suitable products reaches 99.9%. Thanks to controlled raw materials and a streamlined process, each batch of emulsion explosives maintains stable emulsifying ability and storage stability, so the customer continues to work according to the approved recipe without readjustment due to inter-batch fluctuations. Additionally, orders in small quantities are accepted, volume discounts apply - purchasing risks are reduced.
Specifications
| Indicator | Norm | Test method |
| Appearance | Viscous transparent liquid | Visual control |
| Density at 20 °C, kg/m³ | 900.0–980.0 | SH/T0604 |
| Flash point (open crucible), °C | Not lower than 180 | GB/T3536 |
| Kinematic viscosity at 100 °C, mm²/s | 50.00–100.0 | GB/T265 |
| Base number (in terms of KOH), mg/g | 25.0–50.0 | SH/T0251 |
| Nitrogen (mass fraction), % | 0.70–1.00 | GB/T9170 |
Note:the product is manufactured according to the corporate standard Q/YHT016-2015. The specific applicable standards, ratings and applications are determined by the technical data sheet (TDS) and test report supplied with the product, as well as the results of customer formulation validation.
Applications
Polymer emulsifier T101R is mainly used in the production of bulk and packaged emulsion explosives and is a key emulsifying component in the production of emulsion explosives. It is widely used in the manufacture of industrial explosives for mining, hydraulic engineering, railway and tunneling. The type of product is selected directly according to the shape of the line (bulk or packaged), the composition of the oil phase and the required shelf life; a team of developers and technical support is ready to help with selection, adaptation to specific applications and development of individual solutions. The explosive emulsion prepared with our product is resistant to water and acids, pumps well and remains stable during long-distance pumping and on-site charging.
About us
The company was founded in April 2018. The company's own production site occupies approximately 46,667 m² and employs more than 80 people: 12 engineering and technical specialists, 9 development department employees and 45 production workers. The company operates five lines for the production of lubricating oil additives with an annual capacity of 60,000 tons, the range includes more than 40 items. Our technical team has provided services to companies such as Shell, BP, Castrol, Total, CNPC and Sinopec.
Service and guarantees
Pre-sales service:selection of product for line type (bulk/packaged), oil phase composition and required shelf life, free technical consultations, commercial offer within 2-3 business days after receiving full parameters. We accept orders in small quantities - this is convenient for checking quality before bulk purchasing.
After-sales service:remote technical support and personnel training, the necessary technical materials are transferred along with the product. In case of disagreement on quality, the parties, by agreement, send the disputed batch for an independent examination to a third-party laboratory - the final decision is objective and transparent.
Logistics and delivery
Packing:By default, we ship the product in 200 liter steel barrels or in tank containers (IBC), the packaging complies with export standards. The barrels are placed on pallets and covered with protective covers - this eliminates rolling, shock and moisture during transportation. Customer's logo, neutral packaging and fumigation-free plywood boxes are available; Along with the cargo, labels and packing lists are sent, and before shipment, photographs of the packaging are sent for approval.
Transportation:We work by sea, road and rail transport, as well as multimodal schemes; If necessary, we fully cooperate with the customer’s forwarder. Standard orders are shipped within 7-10 days after signing the contract and receiving advance payment; Delivery to Russia and Central Asia takes about 15–20 days, urgent shipment is possible.
Payment:bank transfer (T/T); Discounts are provided for wholesale buyers, cooperation under the OEM/ODM scheme is available.
Questions and answers
Question 1、What is the recommended dosage of the product and how to determine the addition proportion?
Answer:The product is used in the production of bulk and packaged emulsion explosives; recommended dosage is 1.0–2.0% (by weight). The actual proportion is determined taking into account the composition of the oil phase, the type of line and the required shelf life; Before purchasing in bulk, you can place an order in a small batch and test the product in your own recipe.
Question 2、Which oil phases is the product compatible with?
Answer:The product is well compatible with waxy oil phases, resistant to acids and shelf stable. Suitability for different oil phase formulations is checked on samples taking into account the customer’s actual recipe; The technical team will help with the assessment.
Question 3、Are you a manufacturer or trading company? What is the minimum order quantity?
Answer:We are a manufacturer: we have our own workshops and testing equipment. The minimum order quantity is 1 ton; We invite customers to visit the production.
Question 4、Is it possible to produce custom recipes and cooperate with OEM/ODM?
Answer:Yes, we develop specialized recipes for customer needs and provide OEM/ODM services - please contact us.
contact us
Related Popular Products
T202 Zinc salt of dialkyldithiophosphoric acid based on primary butyl and octyl groups
1、The raw materials and technology are transparent: the product is obtained from thiophosphoric acid, synthesized on the basis of butanol and octanol. It combines antioxidant, anti-wear and anti-corrosion effects and is suitable for motor, transmission and hydraulic oil formulations. 2、The product is suitable for compounding transmission oils and is considered as one of the options when selecting additives for transmission oils; recommended dosage is 0.5–3.0% (by weight). 3、Thermal stability is at a good level: the flash point in an open crucible is not lower than 180 °C, and the content of sulfur, phosphorus and zinc is standardized by clear indicators, which simplifies the selection according to the technical data sheet and the target recipe.
T109D (TBN360) High alkaline calcium alkyl salicylate
1、High base number (340-380 mg KOH/g) and powerful acid neutralization: the product provides alkalinity reserve for heavy diesel oils, oils with extended drain intervals and operating conditions on high sulfur content fuels. 2、Excellent cleaning properties and thermal stability at high temperatures inhibit carbon deposits and varnish deposits on the piston; light color and low viscosity (≤50 mm²/s at 100 °C) simplify the introduction of the product into the formulation. 3、Good oil solubility, compatibility with sulfonates and hydrolytic stability facilitate compounding with other single additives; The product works effectively in combination with an antioxidant additive, extending oil life.
T104A (TBN25) Synthetic low base number calcium alkyl benzene sulfonate
1、Low-alkaline synthetic additives for the production of oils with a high soap content combine detergent, anti-corrosion and anti-foam properties: thanks to the TBN 25 indicator, they are suitable for conventional motor oil formulations, and the finished oil is transparent and has an even light shade. 2、Alkali number - 20.0–35.0 mg/g, flash point - not lower than 180 °C; the product is manufactured according to the corporate standard Q/YHT003-2015 and undergoes full quality control upon leaving the factory - a test report is attached to each batch. 3、Production is localized on our own site with a developed supply chain: five production lines provide an annual capacity of 60,000 tons, which allows us to find a balance between quality, delivery speed and total procurement cost.
L57 Octylbutyldiphenylamine
1、High anti-oxidation efficiency at high temperatures. Significantly increases the thermal stability of hot oils, effectively inhibits the increase in viscosity in high-quality motor oils and extends the drain interval. 2、Excellent compatibility. In composition with aromatic amines and sterically hindered phenols, it exhibits a synergistic effect. It is a basic component of high-quality additives for hydraulic oils. 3、Excellent high temperature thermal stability. The liquid form is convenient for dosing. Suitable for turbine oils, coolants and other industrial oils, ensuring trouble-free long-term operation of equipment.
T9100 Additive package for four-stroke engine oils
1、Ready one-step formulation: with a dosage of only 6.5%, the package immediately meets the requirements of API SL and JASO MA2 - engine anti-wear protection and wet clutch friction properties are combined in one composition. 2、A complete set of functional components for recipe tasks. Base number 88.0–108 mg KOH/g; balanced calcium, zinc, phosphorus and nitrogen components provide a synergy of detergent, dispersant, antioxidant and anti-wear effects - the finished product is transparent and clean. 3、Possibility of flexible adjustment of viscosity classes. The package is compatible with non-dispersing viscosity additives and allows you to obtain a wide range of viscosity grades; production is carried out according to the Q/YHT004-2015 standard, each batch undergoes full control with a test report included.
T106A (TBN300) High alkaline linear alkyl benzene sulfonate calcium
1、High acid-neutralizing ability. In additive formulations for diesel oils, the product is used as a detergent additive; It effectively neutralizes acids and is suitable for the preparation of medium and high-grade motor oils, as well as marine oils. 2、Detergent-dispersant effect and corrosion protection. Products of the T106A line have detergent-dispersant properties and anti-corrosion characteristics in oil systems; they are recommended for formulations of motor and marine oils, which are subject to increased purity requirements. 3、Clear indicators - convenient for recipe mixing. The total alkaline number (in terms of KOH) is 295–310 mg/g, the recommended dosage is 0.5–3.0%; the customer can independently evaluate the introduction of the product based on the base oil and the recipe system.
L135 Di-nonyldiphenylamine
1、High-temperature amine antioxidant with increased resistance: based on diphenylamine, which at high temperatures continuously suppresses the late stage of oxidation of motor oil and lasts longer than conventional bulk-hindered phenols, increasing the oil change interval. 2、Good compatibility and synergistic effect. In combination with other aromatic amines and bulk-hindered phenols, mutual reinforcement occurs, making the product suitable for formulations of premium motor oils, thermal oils, transformer oils and greases. 3、Excellent thermal stability at high temperatures. As an additive for hydraulic oil, it is used in high-temperature hydraulic systems of injection molding machines and steel-casting machines; At the same time, it inhibits the growth of the acid number of transformer oil.
T2007A Polyisobutylene succinic anhydride
1、The product is produced by thermal addition method from highly reactive polyisobutylene (Mn = 1000) and does not contain chlorine; ashless dispersants based on it are distinguished by excellent cleaning properties at high temperatures and good sludge dispersion at low temperatures. 2、This is an intermediate product of the succinic anhydride class, obtained by thermal addition: density 950 kg/m³, flash point 180 °C, kinematic viscosity 800 mm²/s, total acid number 110 mg KOH/g. 3、One product - several directions: based on it, bis-/polyalkenylsuccinimide and borated ashless dispersants are produced, as well as emulsifiers for emulsion explosives and technological additives for petrochemical production.
T8556 Organic molybdenum anti-friction additive
1、Energy saving: As a highly effective friction modifier, the product forms a boundary lubricating film on friction surfaces, which can significantly reduce the coefficient of friction, fuel consumption and cylinder wear. 2、Synergy of components: being a high-quality molybdenum additive, the product, when used together with antioxidant and anti-corrosion additives of the ZDDP series, as well as with aromatic amine antioxidants, gives a pronounced synergistic effect in terms of anti-wear and antioxidant properties. 3、Eco-friendly formulation: The product does not contain sulfur and phosphorus, has excellent oil solubility and, as an environmentally friendly molybdenum additive, is suitable for the production of high-quality gasoline and diesel engine oils and environmentally friendly lubricants, fully satisfying the most stringent environmental requirements.
T203 Zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
1、The additive is made from thiophosphoric acid obtained on the basis of octanol: the structure of the zinc salt provides excellent thermal stability and reliable anti-wear and antioxidant protection in medium and high-class diesel oils, featuring high thermal-oxidative stability. 2、Hydrolytic stability and antioxidant properties are excellent: the content of sulfur, phosphorus and zinc is strictly controlled according to corporate standards, the flash point is not lower than 180 ° C, so the product is suitable for anti-wear hydraulic oil formulations as hydraulic oil additives. 3、Each batch undergoes full control according to the corporate standard Q/YHT006-2015 and is accompanied by a test report; As a gear oil additive, the product is stable from batch to batch and helps balance costs when purchasing in bulk.
T106Z (TBN330) High alkaline synthetic calcium dialkylbenzenesulfonate for lubricants
1、Alkalinity number (according to KOH) - not less than 330 mg KOH/g (according to the SH/T 0251 method); The high ability to neutralize acids provides oils and greases with a sufficient supply of alkalinity. 2、Calcium nanocarbonate micelles stabilization technology: after sulfonation, calcium treatment and carbonization, a stable system is formed. The retention of the alkaline number is at least 98%, and the stability of the indicators from batch to batch is ensured at the technology level. 3、Special modification for grease: The product is mainly for the preparation of grease, and can be used in the preparation of high-temperature bearing grease and other greases.
T106D (TBN400) High alkaline synthetic calcium sulfonate based on long chain linear alkylbenzene
1、We use long-chain (C₂₀–₂₄) linear alkylbenzenesulfonic acid as raw materials; The product is suitable for the manufacture of calcium sulfonate grease, has a strong neutralizing ability, as well as detergent-dispersant and anti-corrosion effects. 2、Ultra-high alkaline formula: alkaline number - not lower than 395 mg KOH/g, retention of alkaline number - not less than 98%. Even when operating on high-sulfur fuel, the product contains a sufficient supply of acid neutralization. 3、The main application is medium and high-quality motor oils, as well as marine oils; The recommended dosage is 0.5–25% (mass fraction).
T204 Basic zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
1、High pH value. The product is a quality alkaline additive widely used for compounding anti-wear hydraulic oils, mid- and high-grade motor oils, and medium-speed marine oils. 2、Outstanding anti-wear properties. Under conditions of high loads and intense friction, this alkaline oil additive quickly forms a stable protective film, significantly reducing wear on metal surfaces and extending the service life of equipment. 3、Excellent compatibility. As a high-quality alkaline oil additive, the product is easily combined with base mono additives, including extreme pressure sulfur additives, and provides a synergistic effect in transmission and industrial gear oils.
T2022 Additive package for two-stroke engine oils
1、To prepare two-stroke oil of the JASO FC class, only 2.2% (mass fraction when added to the oil) is sufficient - the dosage is highly economical, and bulk purchases allow you to effectively control the costs of the additive package and formulation. 2、Detergency and low smoke, high oil film strength: The product prevents clogging of the motorcycle exhaust system, reduces metal-to-metal wear, and extends engine life without loss of power. Suitable for oil for two-stroke engines with fuel injection and pre-mixing of fuel and oil. 3、Semi-synthetic two-stroke engine oil formulation, prepared with a small amount of polyisobutylene (molecular weight 1000) and a high flash point diluent, provides performance above the requirements of the Japanese JASO FC standard.
T151B Borated polyisobutylene succinimide
1、Chlorine-free, ashless borated dispersant: The product has excellent detergent-dispersant ability, combines anti-oxidation and anti-wear properties, and improves oil compatibility with fluorine rubber seals. 2、T151B is used in the compounding of automatic transmission fluids (ATF) and other products, including automatic transmission additives: providing a detergent-dispersant effect, it helps control friction characteristics and reduces high-temperature corrosion of copper-lead liners. 3、Excellent formulation compatibility: In combination with detergent additives, the product is used in marine diesel and industrial oils; Small additives to transmission and hydraulic oils improve control of oxidative deposits during long-term operation.
T165A High molecular weight polyisobutylene succinimide
1、High molecular weight ashless dispersing agent with a nitrogen content of at least 1.90%: the product is obtained using thermal addition technology, it holds soot and sludge in suspension well, and is especially effective in dispersing low-temperature sludge. 2、Does not contain chlorine, alkaline number is not lower than 40.0 mg KOH/g; is produced according to the corporate standard Q/YHT007-2015 and is suitable for formulations of high-quality gasoline oils of API SH level and higher. 3、Based on highly active polyisobutylene and thermal joining technology: the product copes well with low-temperature sludge and soot, provides good detergent-dispersant efficiency and covers the needs for compounding oils of API SH class and higher.