Products
-
T321Sulfided isobutylene
-
T154A Polyisobutylene succinimide
-
T202 Zinc salt of dialkyldithiophosphoric acid based on primary butyl and octyl groups
-
T5022 Anti-wear additive package for hydraulic oils
-
High molecular weight emulsifier for emulsion explosives
-
T115B (TBN250) High alkaline sulfided calcium alkyl phenate
-
T8556 Organic molybdenum anti-friction additive
-
T2022 Additive package for two-stroke engine oils
-
T104A (TBN25) Synthetic low base number calcium alkyl benzene sulfonate
-
T9100 Additive package for four-stroke engine oils
-
L57 Octylbutyldiphenylamine
-
T107 (TBN400) Highly alkaline synthetic magnesium sulfonate based on long-chain linear alkylbenzene
-
T161B Borated high molecular weight polyisobutylene succinimide with high viscosity and high nitrogen content
-
T204 Basic zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
-
T4209 Additive package for transmission oils
-
T109D (TBN360) High alkaline calcium alkyl salicylate
T2007A Polyisobutylene succinic anhydride
1、The product is produced by thermal addition method from highly reactive polyisobutylene (Mn = 1000) and does not contain chlorine; ashless dispersants based on it are distinguished by excellent cleaning properties at high temperatures and good sludge dispersion at low temperatures.
2、This is an intermediate product of the succinic anhydride class, obtained by thermal addition: density 950 kg/m³, flash point 180 °C, kinematic viscosity 800 mm²/s, total acid number 110 mg KOH/g.
3、One product - several directions: based on it, bis-/polyalkenylsuccinimide and borated ashless dispersants are produced, as well as emulsifiers for emulsion explosives and technological additives for petrochemical production.
Description
marker
Product Description
Polyisobutylene succinic anhydride T2007A is an intermediate product obtained from highly reactive polyisobutylene (Mn = 1000). It is not introduced directly into finished lubricating oils: it serves as a raw material for the production of other additives and industrial products, and further processing is carried out by the customer himself according to his own recipe.
The product is obtained by thermal addition method; it is a member of the succinic anhydride class and is a key intermediate in the synthesis of polyisobutyleneamine (PIBA) fuel detergent additives and ashless succinimide dispersants. Safety precautions - see the relevant chemical safety data sheet.
Customer pain points
When purchasing intermediate products of the succinic anhydride class, buyers are most concerned about the instability of key indicators from batch to batch: if the total acid number, kinematic viscosity and other characteristics “float” between supplies, then when synthesizing ashless succinimide dispersants or polyisobutyleneamine detergent additives on this basis, it is difficult to maintain the normal degree of reaction and the quality of the finished product - products produced according to the same recipe cease to consistently meet the requirements.
Solution
We select highly reactive polyisobutylene with Mn = 1000 and use hermetic production technology with intelligent control of the entire process: key parameters - total acid number, kinematic viscosity and others - are maintained with a deviation of no more than ±0.5%, the share of suitable products reaches 99.9%. The quality of the batch is ensured at the entrance, at the source of raw materials.
Specifications
Note:products are manufactured according to the corporate standard Q/JTH012-2008; Specific applicable standards, performance and applications are determined by the technical data sheet (TDS) and test report supplied with the product, as well as the results of customer formulation validation.
| Indicator | Typical data | Test method |
| Density at 20 °C, kg/m³ | 950 | GB/T1884 |
| Flash point (open crucible), °C | 180 | GB/T3536 |
| Kinematic viscosity at 100 °C, mm²/s | 800 | GB265 |
| Total acid number, mg KOH/g | 110 | Q/JTH012 Appendix A |
Applications
The product belongs to the class of intermediate additives based on succinic anhydride and is aimed primarily at fuel additive manufacturers, lubricating oil additive plants and blasting plants. Typical uses: (1) production of bis-/polyalkenylsuccinimide and borated ashless dispersants; (2) production of emulsifiers for emulsion explosives; (3) production of technological additives for petrochemical plants.
About us
We have been operating since April 2018 and specialize in the development, production and sale of additives for lubricating oils - this is the area of fine chemistry. Our plant occupies approximately 46,667 m² and is equipped with five additive production lines with a total capacity of 60,000 tons per year; the assortment includes more than 40 items. Our company's technologists have provided services to companies such as Shell, BP, Castrol, Total, CNPC and Sinopec, so they know the products and market requirements well. Contact us - we will be glad to cooperate.
Service and guarantees
We accompany the client at all stages: we select the product according to the parameters of the regime, type of oil and target characteristics, provide free consultation and prepare a commercial proposal within 2-3 business days. Samples are produced in 7–10 days, and we also accept small-volume trial batches. The order goes into production in 3–5 days and is shipped in 7–10 days; if necessary, the deadlines are accelerated. Products are tested according to state and corporate standards, a test report is attached to the delivery, inspection is possible at our factory or by a third party. The warranty period is determined by the contract; Remote technical support is provided, and disputed batches are sent for independent examination to a third-party laboratory. Payment - bank transfer (T/T); There are discounts for wholesale buyers, OEM/ODM channels are available.
Logistics and delivery
We ship by sea, land and rail, as well as via multimodal schemes; We also work with a forwarder specified by the customer. Shipment - 7–10 days after signing the contract and receiving advance payment; Delivery to Russia and Central Asia takes about 15–20 days, urgent shipment is possible. We provide end-to-end cargo tracking, transportation insurance and a full set of transport documents - bill of lading, waybills and others.
Standard packaging is 200 liter steel drums or tank containers (IBC) according to export standards: pallets and protective covers prevent displacement, shock and moisture ingress. Customer's logo, neutral packaging and fumigation-free plywood boxes are available; Labels and packing slips are included with the shipment.
Questions and answers
Question 1、Can I request samples? Do you accept orders in small quantities?
Answer:Yes. It takes 7–10 days to produce samples; we also accept small batches - this allows us to check the characteristics of the product and the stability of the customer’s recipe before purchasing in industrial quantities.
Question 2、How to choose a product for your operating conditions?
Answer:It is enough to indicate the type of oil, target characteristics and conditions of use - our team will offer a suitable brand within 2-3 business days. If you are in doubt about your choice, you can first order a sample for testing.
Question 3、What series and sizes do you produce?
Answer:We offer standard and custom series: standard items are always in stock, special versions are manufactured upon request. We will send you a complete list of specifications along with the commercial offer.
Question 4、Are you a manufacturer or trading company? What is the minimum order quantity?
Answer:We are a manufacturing plant with our own workshops and testing equipment. The minimum order quantity is 1 ton; We invite you to visit the production and see for yourself.
Question 5、Is it possible to develop customized formulations and OEM/ODM cooperation?
Answer:Yes, we develop specialized recipes for customer needs and provide OEM/ODM services - please contact us, we will be happy to help.
contact us
Related Popular Products
T8556 Organic molybdenum anti-friction additive
1、Energy saving: As a highly effective friction modifier, the product forms a boundary lubricating film on friction surfaces, which can significantly reduce the coefficient of friction, fuel consumption and cylinder wear. 2、Synergy of components: being a high-quality molybdenum additive, the product, when used together with antioxidant and anti-corrosion additives of the ZDDP series, as well as with aromatic amine antioxidants, gives a pronounced synergistic effect in terms of anti-wear and antioxidant properties. 3、Eco-friendly formulation: The product does not contain sulfur and phosphorus, has excellent oil solubility and, as an environmentally friendly molybdenum additive, is suitable for the production of high-quality gasoline and diesel engine oils and environmentally friendly lubricants, fully satisfying the most stringent environmental requirements.
T107 (TBN400) Highly alkaline synthetic magnesium sulfonate based on long-chain linear alkylbenzene
1、Low ash content. As a magnesium sulfonate detergent, the product effectively controls oil ash content: with a TBN of at least 395 mg KOH/g, it has excellent acid suppression properties and is an ideal base ingredient for the preparation of low ash oils. 2、Low turbidity and low sediment value: the product significantly reduces the deposition of impurities during oil storage and operation, reducing filtration costs and the risk of equipment clogging. 3、Detergency and corrosion protection: The additive is made from long-chain (C20-24) linear alkylbenzenesulfonic acid and provides good detergent, dispersant and anti-corrosion properties.
T321Sulfided isobutylene
1、Excellent extreme durability and anti-wear properties, high sulfur content. Under load, it quickly forms an iron sulfide boundary film, effectively increasing the welding load. 2、Excellent solubility in oils. Suitable not only for all types of gear oils, but also as a high-quality additive in coolant that meets the requirements of heavy cutting conditions. 3、Wide scope of application. The recommended dosage is 1.5–5.0%. The product is widely used in the preparation of medium and high-grade gear oils, anti-friction hydraulic oils and greases; mixing is not difficult.
T109D (TBN360) High alkaline calcium alkyl salicylate
1、High base number (340-380 mg KOH/g) and powerful acid neutralization: the product provides alkalinity reserve for heavy diesel oils, oils with extended drain intervals and operating conditions on high sulfur content fuels. 2、Excellent cleaning properties and thermal stability at high temperatures inhibit carbon deposits and varnish deposits on the piston; light color and low viscosity (≤50 mm²/s at 100 °C) simplify the introduction of the product into the formulation. 3、Good oil solubility, compatibility with sulfonates and hydrolytic stability facilitate compounding with other single additives; The product works effectively in combination with an antioxidant additive, extending oil life.
T204 Basic zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
1、High pH value. The product is a quality alkaline additive widely used for compounding anti-wear hydraulic oils, mid- and high-grade motor oils, and medium-speed marine oils. 2、Outstanding anti-wear properties. Under conditions of high loads and intense friction, this alkaline oil additive quickly forms a stable protective film, significantly reducing wear on metal surfaces and extending the service life of equipment. 3、Excellent compatibility. As a high-quality alkaline oil additive, the product is easily combined with base mono additives, including extreme pressure sulfur additives, and provides a synergistic effect in transmission and industrial gear oils.
T165A High molecular weight polyisobutylene succinimide
1、High molecular weight ashless dispersing agent with a nitrogen content of at least 1.90%: the product is obtained using thermal addition technology, it holds soot and sludge in suspension well, and is especially effective in dispersing low-temperature sludge. 2、Does not contain chlorine, alkaline number is not lower than 40.0 mg KOH/g; is produced according to the corporate standard Q/YHT007-2015 and is suitable for formulations of high-quality gasoline oils of API SH level and higher. 3、Based on highly active polyisobutylene and thermal joining technology: the product copes well with low-temperature sludge and soot, provides good detergent-dispersant efficiency and covers the needs for compounding oils of API SH class and higher.
Zinc salt of dialkyldithiophosphoric acid based on secondary alkyl groups
1、Three effects in one additive: antioxidant, anti-wear and corrosion protection. Zinc dithiophosphate (zddp) inhibits oil oxidation, prevents bearing corrosion and reduces cam lifter wear, providing comprehensive, all-around engine oil protection. 2、Light yellow transparent liquid, flash point not lower than 160 °C. Mass fraction of sulfur 14.0–16.0%, phosphorus 6.5–8.0%, zinc 6.5–9.0%, pH - no less than 5.80. The product is manufactured according to the corporate standard Q/YHT006, undergoes full control before shipment, and a test report is attached to each batch. 3、Own production: 5 technological lines, annual capacity 60,000 tons. The deviation of key parameters is kept within ±0.5%, the share of suitable products is 99.9%. Consistent quality from batch to batch, a balanced combination of performance characteristics, delivery speed and total purchasing costs.
L57 Octylbutyldiphenylamine
1、High anti-oxidation efficiency at high temperatures. Significantly increases the thermal stability of hot oils, effectively inhibits the increase in viscosity in high-quality motor oils and extends the drain interval. 2、Excellent compatibility. In composition with aromatic amines and sterically hindered phenols, it exhibits a synergistic effect. It is a basic component of high-quality additives for hydraulic oils. 3、Excellent high temperature thermal stability. The liquid form is convenient for dosing. Suitable for turbine oils, coolants and other industrial oils, ensuring trouble-free long-term operation of equipment.
T203 Zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
1、The additive is made from thiophosphoric acid obtained on the basis of octanol: the structure of the zinc salt provides excellent thermal stability and reliable anti-wear and antioxidant protection in medium and high-class diesel oils, featuring high thermal-oxidative stability. 2、Hydrolytic stability and antioxidant properties are excellent: the content of sulfur, phosphorus and zinc is strictly controlled according to corporate standards, the flash point is not lower than 180 ° C, so the product is suitable for anti-wear hydraulic oil formulations as hydraulic oil additives. 3、Each batch undergoes full control according to the corporate standard Q/YHT006-2015 and is accompanied by a test report; As a gear oil additive, the product is stable from batch to batch and helps balance costs when purchasing in bulk.
T115B (TBN250) High alkaline sulfided calcium alkyl phenate
1、High acid-neutralizing ability: base number - 245–265 mg KOH/g. The product is used in the manufacture of medium and high-class motor oils, especially turbodiesel, and helps control the formation of carbon deposits on the piston. 2、Recommended dosages are clearly specified: 0.5-4.0% for motor oils and 25-35% for marine cylinder oil (mass fraction). The additive is easily added to the formulation and is compatible with other detergent additives and ashless dispersants. 3、We use a closed technological scheme and intelligent control at all stages of production: fluctuations in key parameters do not exceed ±0.5%, the share of quality products reaches 99.9%. Custom manufacturing (OEM/ODM) and test samples are available.
T104A (TBN25) Synthetic low base number calcium alkyl benzene sulfonate
1、Low-alkaline synthetic additives for the production of oils with a high soap content combine detergent, anti-corrosion and anti-foam properties: thanks to the TBN 25 indicator, they are suitable for conventional motor oil formulations, and the finished oil is transparent and has an even light shade. 2、Alkali number - 20.0–35.0 mg/g, flash point - not lower than 180 °C; the product is manufactured according to the corporate standard Q/YHT003-2015 and undergoes full quality control upon leaving the factory - a test report is attached to each batch. 3、Production is localized on our own site with a developed supply chain: five production lines provide an annual capacity of 60,000 tons, which allows us to find a balance between quality, delivery speed and total procurement cost.
T106Z (TBN330) High alkaline synthetic calcium dialkylbenzenesulfonate for lubricants
1、Alkalinity number (according to KOH) - not less than 330 mg KOH/g (according to the SH/T 0251 method); The high ability to neutralize acids provides oils and greases with a sufficient supply of alkalinity. 2、Calcium nanocarbonate micelles stabilization technology: after sulfonation, calcium treatment and carbonization, a stable system is formed. The retention of the alkaline number is at least 98%, and the stability of the indicators from batch to batch is ensured at the technology level. 3、Special modification for grease: The product is mainly for the preparation of grease, and can be used in the preparation of high-temperature bearing grease and other greases.
T3259 Additive package for heavy-duty diesel engine oils
1、This diesel engine oil additive contains quality detergent additives and soot dispersant, which significantly improves detergency at high temperatures. 2、A thoughtful combination of high-temperature antioxidants and anti-oxidation and anti-corrosion additives ensures precise control of the engine oil base number (TBN): acidic combustion products are effectively neutralized, and the engine is reliably protected from corrosion. 3、The product is suitable for formulations of heavy diesel oils of classes CI-4 and below: the oil base number (TBN) reserve is maintained sufficiently, the antioxidant and anti-wear properties remain at a high level, and the oil change interval is extended.
T9100 Additive package for four-stroke engine oils
1、Ready one-step formulation: with a dosage of only 6.5%, the package immediately meets the requirements of API SL and JASO MA2 - engine anti-wear protection and wet clutch friction properties are combined in one composition. 2、A complete set of functional components for recipe tasks. Base number 88.0–108 mg KOH/g; balanced calcium, zinc, phosphorus and nitrogen components provide a synergy of detergent, dispersant, antioxidant and anti-wear effects - the finished product is transparent and clean. 3、Possibility of flexible adjustment of viscosity classes. The package is compatible with non-dispersing viscosity additives and allows you to obtain a wide range of viscosity grades; production is carried out according to the Q/YHT004-2015 standard, each batch undergoes full control with a test report included.
L135 Di-nonyldiphenylamine
1、High-temperature amine antioxidant with increased resistance: based on diphenylamine, which at high temperatures continuously suppresses the late stage of oxidation of motor oil and lasts longer than conventional bulk-hindered phenols, increasing the oil change interval. 2、Good compatibility and synergistic effect. In combination with other aromatic amines and bulk-hindered phenols, mutual reinforcement occurs, making the product suitable for formulations of premium motor oils, thermal oils, transformer oils and greases. 3、Excellent thermal stability at high temperatures. As an additive for hydraulic oil, it is used in high-temperature hydraulic systems of injection molding machines and steel-casting machines; At the same time, it inhibits the growth of the acid number of transformer oil.
T205 Zinc salt of dialkyldithiophosphoric acid based on propyl, secondary and primary octyl groups
1、The product is synthesized on the basis of thiophosphoric acid obtained from a mixture of primary and secondary alcohols - propyl and octyl: due to the excellent anti-wear properties of the oil and high hydrolytic stability, it is the main additive in gasoline oil for anti-wear and antioxidant protection of high-quality motor oils. 2、The content of sulfur, phosphorus and zinc - 16.00-18.50%, 8.00-9.50% and 9.00-10.80%, respectively - is maintained according to the corporate standard Q/YHT006-2015; Each batch undergoes full control at the exit from the factory, a test report is attached to the delivery, so the lubricating properties of the oil are stable from batch to batch. 3、Multifunctional base anti-wear additive with four functions - anti-oxidation, anti-wear, extreme pressure and anti-corrosion: protects the camshaft, tappets and cylinder liners, and is suitable for compounding high-quality motor oils with additives into gasoline oil.