Products
-
T154A Polyisobutylene succinimide
-
T205 Zinc salt of dialkyldithiophosphoric acid based on propyl, secondary and primary octyl groups
-
High molecular weight emulsifier for emulsion explosives
-
T4209 Additive package for transmission oils
-
L135 Di-nonyldiphenylamine
-
T5065 Additive package for thermal oils
-
T161B Borated high molecular weight polyisobutylene succinimide with high viscosity and high nitrogen content
-
T5022 Anti-wear additive package for hydraulic oils
-
Zinc salt of dialkyldithiophosphoric acid based on secondary alkyl groups
-
T204 Basic zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
-
T8556 Organic molybdenum anti-friction additive
-
L57 Octylbutyldiphenylamine
-
T115B (TBN250) High alkaline sulfided calcium alkyl phenate
-
T106D (TBN400) High alkaline synthetic calcium sulfonate based on long chain linear alkylbenzene
-
T106A (TBN300) High alkaline linear alkyl benzene sulfonate calcium
-
T9100 Additive package for four-stroke engine oils
T165A High molecular weight polyisobutylene succinimide
1、High molecular weight ashless dispersing agent with a nitrogen content of at least 1.90%: the product is obtained using thermal addition technology, it holds soot and sludge in suspension well, and is especially effective in dispersing low-temperature sludge.
2、Does not contain chlorine, alkaline number is not lower than 40.0 mg KOH/g; is produced according to the corporate standard Q/YHT007-2015 and is suitable for formulations of high-quality gasoline oils of API SH level and higher.
3、Based on highly active polyisobutylene and thermal joining technology: the product copes well with low-temperature sludge and soot, provides good detergent-dispersant efficiency and covers the needs for compounding oils of API SH class and higher.
Description
marker
Product Description
T165A - high molecular weight polyisobutylene succinimide, obtained from highly active polyisobutylene using thermal addition technology; It is a high molecular weight, ashless dispersing agent. Due to its high nitrogen content and high molecular weight, it reliably holds soot and sludge in suspension and significantly inhibits the increase in engine oil viscosity during operation. As a highly effective dispersing agent, the product is introduced into the formulation in an amount of 1.5–4.0% (by weight) and is produced according to the corporate standard Q/YHT007-2015.
Customer pain points
In practice, there is often a risk that the dispersing ability for low-temperature sludge will be insufficient. In high-quality gasoline oils operating in short city trips with frequent starts and stops, low-temperature sludge is actively formed. If the dispersant's molecular weight is too low and its nitrogen content is too low, the sludge is no longer suspended and the oil's viscosity begins to rise rapidly.
Our solution
We take highly active polyisobutylene as a basis and use thermal addition technology to form a high-molecular structure of polyisobutylene succinimide. Nitrogen content is not lower than 1.90%, alkaline number is not lower than 40.0 mg KOH/g: this molecular basis and the structure of polar groups guarantee reliable dispersion of soot and sludge, and the product gives a particularly pronounced effect on low-temperature sludge.
Specifications
| Indicator | Norm | Test method |
| Appearance | Viscous transparent liquid | Visual control |
| Density at 20 °C, kg/m³ | 850.0–990.0 | SH/T0604 |
| Flash point (open crucible), °C | Not lower than 180 | GB/T3536 |
| Kinematic viscosity at 100 °C, mm²/s | 400.0–550.0 | GB/T265 |
| Nitrogen (mass fraction), % | Not lower than 1.90 | GB/T9170 |
| Base number (in terms of KOH), mg/g | Not lower than 40.0 | SH/T0251 |
Note:products are manufactured according to corporate standard Q/YHT007-2015. The exact applicable standards, ratings and applications are determined by the technical data sheet (TDS), test report, and customer formulation verification results supplied with the product.
Applications
The product is designed primarily for lubricating oil blending plants: it is introduced into the formulations of medium and high-grade gasoline oils of API SH level and higher. It is also applicable in the preparation of high-quality diesel oils, and best reveals itself in the formulations of environmentally friendly oils for various purposes.
As the main dispersant, it keeps soot particles, sludge products and varnish deposit precursors suspended in the oil, preventing them from settling on the piston rings, oil passages and valve train parts. In a reasonable composition with detergent additives and other components, it simultaneously covers both the detergent and dispersing needs of the oil.
About us
We have been operating since April 2018 and specialize in the development, production and sale of additives for lubricating oils - this is the area of fine chemistry. We are constantly improving recipes and technological processes, based on the real problems of customers.
We have our own production: the site occupies about 46,667 m², it operates five lines for the production of lubricating oil additives with an annual capacity of 60,000 tons, which allows us to develop more than 40 types of products. The staff is over 80 people, including 12 engineering and technical specialists (including the chief engineer), 9 research staff and 45 production workers. Our technical team has already supported companies such as Shell, BP, Castrol, Total, CNPC and Sinopec, so we understand the challenges of domestic and foreign manufacturers well. We will be glad to cooperate.
Service and guarantees
We select the product specifically for the operating mode, type of oil and customer’s tasks; technical consultation is free, we send a commercial proposal within 2-3 business days. We produce samples within 7–10 days; small-volume trial batches are possible. After confirmation of the order, we start production within 3–5 days and ship finished products in 7–10 days, if necessary we accelerate the deadlines. The warranty period is fixed in the contract; We provide remote technical support, and in controversial situations we send the sample for independent examination to a third-party laboratory. Payment - bank transfer (T/T); There are discounts for wholesale buyers, OEM/ODM channels are available.
Logistics and delivery
By default, we ship products in 200 liter steel barrels or in big bag containers - this is the export standard. The cargo is equipped with pallets and protective covers that dampen vibration and do not allow moisture to pass through. It is possible to apply your logo, neutral packaging, as well as packaging in plywood boxes without fumigation; We supply labels and packing slips along with the goods.
We work with sea, road and rail transport, as well as with mixed (multimodal) schemes; We completely adapt to the forwarder specified by the customer. Shipment - within 7–10 days after signing the contract and receiving advance payment; Delivery to Russia and Central Asia takes about 15–20 days, urgent dispatch is possible. We provide end-to-end cargo tracking, transportation insurance and a full set of transport documents - bill of lading, waybills, etc.
Questions and answers
Question 1、Which oils does T165A apply to?
Answer:The product is introduced into the formulations of medium and high-grade gasoline oils of API SH level and higher, it is also suitable for high-quality diesel oils, and is best suited for the preparation of environmentally friendly oils for various purposes. The recommended dosage is 1.5–4.0% (by weight). The exact applicable standards, ratings and applications are determined by the technical data sheet (TDS), test report and customer formulation verification results - these documents are supplied with the product.
Question 2、Are you a manufacturer or trading company? What is the minimum order quantity?
Answer:We are a manufacturing plant with our own production area of approximately 46,667 m². We have five lines for the production of lubricating oil additives with an annual capacity of 60,000 tons, our own workshops and testing equipment. The minimum order quantity is 1 ton; We invite customers to personally familiarize themselves with the production.
Question 3、Is it possible to develop customized formulations and OEM/ODM cooperation?
Answer:We have our own research department, which is ready to develop a specialized dispersant product according to the oil positioning, formulation requirements and actual operating conditions of the customer; We also provide OEM/ODM services. Our technical team has already supported companies such as Shell, BP, Castrol, Total, CNPC and Sinopec.
contact us
Related Popular Products
High molecular weight emulsifier for emulsion explosives
1、The product is based on highly active polyisobutylene succinic anhydride; it is suitable for lines for the production of emulsion explosives of any configuration, characterized by small micelles and good emulsifying ability during use. 2、The emulsion explosives obtained on its basis are water-resistant and acid-resistant, stable during storage and have good pumpability; The recommended dosage is 1.0–2.0%. 3、The finished explosive emulsion is homogeneous and stable; The product is equally suitable for bulk and packaged lines. Production is localized, the supply chain is streamlined, which allows us to find a balance between quality, delivery time and the total cost of purchase.
T3259 Additive package for heavy-duty diesel engine oils
1、This diesel engine oil additive contains quality detergent additives and soot dispersant, which significantly improves detergency at high temperatures. 2、A thoughtful combination of high-temperature antioxidants and anti-oxidation and anti-corrosion additives ensures precise control of the engine oil base number (TBN): acidic combustion products are effectively neutralized, and the engine is reliably protected from corrosion. 3、The product is suitable for formulations of heavy diesel oils of classes CI-4 and below: the oil base number (TBN) reserve is maintained sufficiently, the antioxidant and anti-wear properties remain at a high level, and the oil change interval is extended.
T202 Zinc salt of dialkyldithiophosphoric acid based on primary butyl and octyl groups
1、The raw materials and technology are transparent: the product is obtained from thiophosphoric acid, synthesized on the basis of butanol and octanol. It combines antioxidant, anti-wear and anti-corrosion effects and is suitable for motor, transmission and hydraulic oil formulations. 2、The product is suitable for compounding transmission oils and is considered as one of the options when selecting additives for transmission oils; recommended dosage is 0.5–3.0% (by weight). 3、Thermal stability is at a good level: the flash point in an open crucible is not lower than 180 °C, and the content of sulfur, phosphorus and zinc is standardized by clear indicators, which simplifies the selection according to the technical data sheet and the target recipe.
T5033 Ashless anti-wear additive package for hydraulic oils
1、Ash-free formula based on high-quality anti-wear and ash-free antioxidant additives. Does not contain antifoam additives or viscosity depressants. Optimally suitable for preparing anti-wear hydraulic oils of the HVLP oil class. 2、Designed for high-load conditions: withstands the operation of plunger pumps at pressures above 30.0 MPa and vane pumps at 14.0–17.5 MPa. An ideal complex for the production of high-quality hydraulic oils, including HVLP 46 oils. 3、Easy to use: just add 1.5% of the package to the base oil to obtain a composition that complies with the GB11118.1-94 L-HM standard. Compatible with viscosities from N32 to N100, helping you consistently produce your entire range of HVLP oil-based products.
T9100 Additive package for four-stroke engine oils
1、Ready one-step formulation: with a dosage of only 6.5%, the package immediately meets the requirements of API SL and JASO MA2 - engine anti-wear protection and wet clutch friction properties are combined in one composition. 2、A complete set of functional components for recipe tasks. Base number 88.0–108 mg KOH/g; balanced calcium, zinc, phosphorus and nitrogen components provide a synergy of detergent, dispersant, antioxidant and anti-wear effects - the finished product is transparent and clean. 3、Possibility of flexible adjustment of viscosity classes. The package is compatible with non-dispersing viscosity additives and allows you to obtain a wide range of viscosity grades; production is carried out according to the Q/YHT004-2015 standard, each batch undergoes full control with a test report included.
T321Sulfided isobutylene
1、Excellent extreme durability and anti-wear properties, high sulfur content. Under load, it quickly forms an iron sulfide boundary film, effectively increasing the welding load. 2、Excellent solubility in oils. Suitable not only for all types of gear oils, but also as a high-quality additive in coolant that meets the requirements of heavy cutting conditions. 3、Wide scope of application. The recommended dosage is 1.5–5.0%. The product is widely used in the preparation of medium and high-grade gear oils, anti-friction hydraulic oils and greases; mixing is not difficult.
T5022 Anti-wear additive package for hydraulic oils
1、Meet stringent standards: The product is designed specifically for industrial hydraulic systems and fully meets the oil requirements of DIN 51524 and ISO 11158 standard. This ensures that the resulting oil when mixed has excellent anti-wear and anti-oxidation properties, effectively extending the life of equipment. 2、Versatile application: suitable for injection molding machines, machine tools and industrial hydraulic stations. Whether it is conventional HLP hydraulic oil or high-pressure systems, the product provides reliable protection for pumps and valves, adapting to a variety of severe operating conditions. 3、Flexible Formulation Solutions: We offer customized formulation support for different base oils and viscosity requirements. It can help you easily prepare high-quality HLP oil, effectively reduce your total procurement costs and improve the competitiveness of your blending plant.
L135 Di-nonyldiphenylamine
1、High-temperature amine antioxidant with increased resistance: based on diphenylamine, which at high temperatures continuously suppresses the late stage of oxidation of motor oil and lasts longer than conventional bulk-hindered phenols, increasing the oil change interval. 2、Good compatibility and synergistic effect. In combination with other aromatic amines and bulk-hindered phenols, mutual reinforcement occurs, making the product suitable for formulations of premium motor oils, thermal oils, transformer oils and greases. 3、Excellent thermal stability at high temperatures. As an additive for hydraulic oil, it is used in high-temperature hydraulic systems of injection molding machines and steel-casting machines; At the same time, it inhibits the growth of the acid number of transformer oil.
L57 Octylbutyldiphenylamine
1、High anti-oxidation efficiency at high temperatures. Significantly increases the thermal stability of hot oils, effectively inhibits the increase in viscosity in high-quality motor oils and extends the drain interval. 2、Excellent compatibility. In composition with aromatic amines and sterically hindered phenols, it exhibits a synergistic effect. It is a basic component of high-quality additives for hydraulic oils. 3、Excellent high temperature thermal stability. The liquid form is convenient for dosing. Suitable for turbine oils, coolants and other industrial oils, ensuring trouble-free long-term operation of equipment.
T3358 Additive package for turbine oils
1、Compatible with viscosity grades 5W-30, 5W-40 and others, meets API SN, ILSAC GF-5 and JASO MA2 requirements. This additive package is the optimal solution for effective compounding. 2、At a dosage of 8.5%, it allows you to obtain all-season oils from base oils of groups II and III. As a specialized oil additive package, it has excellent detergent-dispersant properties. 3、Combines detergent additives, ashless dispersants and anti-oxidation/extreme pressure components. This engine oil additive package effectively suppresses the formation of sludge and varnish deposits, extending oil change intervals.
T154A Polyisobutylene succinimide
1、Ashless succinimide additive made from highly reactive polyisobutylene (Mn=1000) using thermal addition technology: the product does not contain chlorine and inhibits the formation of carbon deposits on pistons and varnish deposits. 2、Excellent detergent-dispersant properties: soot, sludge and varnish precursors formed during fuel combustion are kept suspended in the oil, which prevents varnish deposits from settling in the engine on the piston rings, in the oil passages and on the valve mechanism. 3、Suitable for compounding medium and high quality diesel and gasoline motor oils, as well as cylinder oils for low speed crosshead marine engines; especially recommended for environmentally friendly motor oils. The recommended dosage is 2.0–4.0% (by weight).
T104A (TBN25) Synthetic low base number calcium alkyl benzene sulfonate
1、Low-alkaline synthetic additives for the production of oils with a high soap content combine detergent, anti-corrosion and anti-foam properties: thanks to the TBN 25 indicator, they are suitable for conventional motor oil formulations, and the finished oil is transparent and has an even light shade. 2、Alkali number - 20.0–35.0 mg/g, flash point - not lower than 180 °C; the product is manufactured according to the corporate standard Q/YHT003-2015 and undergoes full quality control upon leaving the factory - a test report is attached to each batch. 3、Production is localized on our own site with a developed supply chain: five production lines provide an annual capacity of 60,000 tons, which allows us to find a balance between quality, delivery speed and total procurement cost.
T115B (TBN250) High alkaline sulfided calcium alkyl phenate
1、High acid-neutralizing ability: base number - 245–265 mg KOH/g. The product is used in the manufacture of medium and high-class motor oils, especially turbodiesel, and helps control the formation of carbon deposits on the piston. 2、Recommended dosages are clearly specified: 0.5-4.0% for motor oils and 25-35% for marine cylinder oil (mass fraction). The additive is easily added to the formulation and is compatible with other detergent additives and ashless dispersants. 3、We use a closed technological scheme and intelligent control at all stages of production: fluctuations in key parameters do not exceed ±0.5%, the share of quality products reaches 99.9%. Custom manufacturing (OEM/ODM) and test samples are available.
T204 Basic zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
1、High pH value. The product is a quality alkaline additive widely used for compounding anti-wear hydraulic oils, mid- and high-grade motor oils, and medium-speed marine oils. 2、Outstanding anti-wear properties. Under conditions of high loads and intense friction, this alkaline oil additive quickly forms a stable protective film, significantly reducing wear on metal surfaces and extending the service life of equipment. 3、Excellent compatibility. As a high-quality alkaline oil additive, the product is easily combined with base mono additives, including extreme pressure sulfur additives, and provides a synergistic effect in transmission and industrial gear oils.
T109D (TBN360) High alkaline calcium alkyl salicylate
1、High base number (340-380 mg KOH/g) and powerful acid neutralization: the product provides alkalinity reserve for heavy diesel oils, oils with extended drain intervals and operating conditions on high sulfur content fuels. 2、Excellent cleaning properties and thermal stability at high temperatures inhibit carbon deposits and varnish deposits on the piston; light color and low viscosity (≤50 mm²/s at 100 °C) simplify the introduction of the product into the formulation. 3、Good oil solubility, compatibility with sulfonates and hydrolytic stability facilitate compounding with other single additives; The product works effectively in combination with an antioxidant additive, extending oil life.
T8556 Organic molybdenum anti-friction additive
1、Energy saving: As a highly effective friction modifier, the product forms a boundary lubricating film on friction surfaces, which can significantly reduce the coefficient of friction, fuel consumption and cylinder wear. 2、Synergy of components: being a high-quality molybdenum additive, the product, when used together with antioxidant and anti-corrosion additives of the ZDDP series, as well as with aromatic amine antioxidants, gives a pronounced synergistic effect in terms of anti-wear and antioxidant properties. 3、Eco-friendly formulation: The product does not contain sulfur and phosphorus, has excellent oil solubility and, as an environmentally friendly molybdenum additive, is suitable for the production of high-quality gasoline and diesel engine oils and environmentally friendly lubricants, fully satisfying the most stringent environmental requirements.