Products
-
T154A Polyisobutylene succinimide
-
T165A High molecular weight polyisobutylene succinimide
-
L135 Di-nonyldiphenylamine
-
T321Sulfided isobutylene
-
T3259 Additive package for heavy-duty diesel engine oils
-
T5022 Anti-wear additive package for hydraulic oils
-
T161B Borated high molecular weight polyisobutylene succinimide with high viscosity and high nitrogen content
-
T115B (TBN250) High alkaline sulfided calcium alkyl phenate
-
T205 Zinc salt of dialkyldithiophosphoric acid based on propyl, secondary and primary octyl groups
-
T202 Zinc salt of dialkyldithiophosphoric acid based on primary butyl and octyl groups
-
T9100 Additive package for four-stroke engine oils
-
T106D (TBN400) High alkaline synthetic calcium sulfonate based on long chain linear alkylbenzene
-
T109D (TBN360) High alkaline calcium alkyl salicylate
-
T5033 Ashless anti-wear additive package for hydraulic oils
-
T2007A Polyisobutylene succinic anhydride
-
T2022 Additive package for two-stroke engine oils
Zinc salt of dialkyldithiophosphoric acid based on secondary alkyl groups
1、Three effects in one additive: antioxidant, anti-wear and corrosion protection. Zinc dithiophosphate (zddp) inhibits oil oxidation, prevents bearing corrosion and reduces cam lifter wear, providing comprehensive, all-around engine oil protection.
2、Light yellow transparent liquid, flash point not lower than 160 °C. Mass fraction of sulfur 14.0–16.0%, phosphorus 6.5–8.0%, zinc 6.5–9.0%, pH - no less than 5.80. The product is manufactured according to the corporate standard Q/YHT006, undergoes full control before shipment, and a test report is attached to each batch.
3、Own production: 5 technological lines, annual capacity 60,000 tons. The deviation of key parameters is kept within ±0.5%, the share of suitable products is 99.9%. Consistent quality from batch to batch, a balanced combination of performance characteristics, delivery speed and total purchasing costs.
Description
marker
Product Description
T209 is a zinc salt of dithiophosphoric acid, the raw material for which is dithiophosphoric acid derived from secondary alcohols (zddp). Introduced into the oil, it inhibits oxidation, suppresses bearing corrosion and reduces wear on cams and tappets, while simultaneously performing an anti-oxidation, anti-wear and anti-corrosion function. This is a universal, broad-spectrum additive that is present in almost any lubricant formulation and acts as a base component. The recommended dosage is 0.5–3.0% by weight. Precautions are outlined in the Safety Data Sheet (MSDS) supplied with the lot.
What concerns do customers have when purchasing zinc secondary alkyl dithiophosphate (zddp) in bulk?
First of all, there is a “drift” of key indicators between parties. The content of sulfur, phosphorus, zinc and pH value directly determine the antioxidant and anti-wear properties of the oil. If arriving batches of the additive differ in these parameters, motor oil prepared according to the same recipe no longer consistently meets the standard, and its performance characteristics begin to “change” from batch to batch.
Our solution:
We use a closed process cycle and end-to-end intelligent control, managing key process parameters. Their deviation is kept within ±0.5%, and the proportion of acceptable products reaches 99.9%. Before shipment, we carry out full tests - for sulfur, phosphorus, zinc, pH, density, flash point and other indicators - in accordance with technical specifications, state and corporate standards. The quality of each batch is controlled and traceable at all stages.
Specifications
| Indicator | Norm | Test method |
| Appearance | Light yellow transparent liquid | Visual control |
| Density at 20 °C, kg/m³ | 1050.0 ~ 1100.0 | SH/T0604 |
| Flash point in open crucible, °C | not less than 160 | GB/T3536 |
| Mass fraction of sulfur, % | 14.00 ~ 16.00 | SH/T0303 |
| Mass fraction of phosphorus, % | 6.50~8.00 | SH/T0296 |
| Mass fraction of zinc,% | 6.50~9.00 | SH/T0226 |
| pH value | not less than 5.80 | Q/YHT006 Appendix A |
Note:The specific applicable standards, rated values and areas of application are determined by the technical data sheet (TDS), test reports and the results of the customer's formulation verification, attached to the batch.
Application
(1) The main purpose is the preparation of motor oils of various classes, especially oils for turbocharged diesel engines operating under severe conditions;
(2) May be added to hydraulic and bearing oil formulations. In the composition of motor oils, it acts as the main anti-wear and antioxidant component, protecting cams, tappets and cylinder liners; in anti-wear hydraulic oils (HLP) and high-pressure hydraulic systems, protects parts of pumps and distributors; in combination with sulfur-containing extreme additives, it is used in transmission and industrial gear oils;
(3) In cutting and grinding cutting fluids, it provides anti-oxidation, anti-corrosion and anti-friction properties; also used alone or in combination with other components in preservative oils and oils for inter-operation protection;
(4) The customer can select the product based on oil type, engine or equipment operating conditions and target characteristics. Our scientific and technical team is ready to provide assistance in selection, adaptation to specific applications and development of individual recipes.
Our team
The company was founded in April 2018. We are a fine chemicals manufacturer specializing in the development, production and sale of lubricant additives.
Own production areas occupy approximately 46,667 m². They host 5 lines for the production of additives, the annual capacity is 60,000 tons, the assortment includes more than 40 items.
The company has a staff of more than 80 people, including 12 engineering and technical specialists (including the chief technologist), 9 employees of the research department and 45 production personnel. Our technical team has already provided services to companies such as Shell, BP, Castrol, Total, CNPC, Sinopec and other Russian and foreign enterprises. We thoroughly know the lubricants market and customer tasks and are ready to help with the selection, adaptation and development of individual solutions.
Technical support
We select the product for specific operating conditions, oil type and target indicators. Technical consultation is free, we prepare a commercial proposal in 2–3 working days; Sample production takes 7–10 days, a small-volume trial batch is possible;
Payment terms: T/T. There are discounts for wholesale buyers, and OEM/ODM schemes are also available.
Logistics and shipment
The standard export type of packaging is 200-liter steel barrels or IBC containers (cube containers), placed on pallets and protected with shrink film from moisture and mechanical damage. Logo can be applied, as well as neutral or fumigated wooden packaging; Each batch comes with a label and packing slip. Delivery is carried out by sea, land, rail or mixed routes; it is possible to work with a forwarder appointed by the customer. Shipment after payment under the contract is in 7–10 days, delivery time to Russia and Central Asia is approximately 15–20 days, express shipping is available. We provide full cargo tracking, transportation insurance and a full set of transport documents (bill of lading, waybills, etc.).
Questions and answers
Q1、Which industries mainly apply the product?
A:The product is widely used in oil and gas, chemical and other industries. The main purpose is the preparation of motor oils, especially oils for turbocharged diesel engines operating under high loads. Our production is built on a closed technological cycle and end-to-end intelligent control: the deviation of key parameters does not exceed ±0.5%, and the share of suitable products is 99.9%.
Q2、How to choose a brand for specific operating conditions?
A:Simply provide your oil type, target base number (TBN) and application conditions, and our team will suggest a suitable brand within 2-3 business days. If the choice is in doubt, test samples can be ordered first.
Q3.Are you a manufacturer or trading company? What is the minimum order quantity?
A:We are a manufacturing plant with our own workshops and testing laboratory. The minimum order quantity is one ton. We invite customers to visit our factory.
Q4、Is custom formulation and OEM/ODM possible?
A:Yes, we develop special oil formulations according to customer specifications and provide OEM/ODM services.
Q5、What is the delivery time?
A:Shipment after payment under the contract - in 7-10 days, delivery to Russia and Central Asian countries takes approximately 15-20 days, urgent delivery is possible. We provide end-to-end cargo tracking and a full set of transport documents.
contact us
Related Popular Products
L135 Di-nonyldiphenylamine
1、High-temperature amine antioxidant with increased resistance: based on diphenylamine, which at high temperatures continuously suppresses the late stage of oxidation of motor oil and lasts longer than conventional bulk-hindered phenols, increasing the oil change interval. 2、Good compatibility and synergistic effect. In combination with other aromatic amines and bulk-hindered phenols, mutual reinforcement occurs, making the product suitable for formulations of premium motor oils, thermal oils, transformer oils and greases. 3、Excellent thermal stability at high temperatures. As an additive for hydraulic oil, it is used in high-temperature hydraulic systems of injection molding machines and steel-casting machines; At the same time, it inhibits the growth of the acid number of transformer oil.
L57 Octylbutyldiphenylamine
1、High anti-oxidation efficiency at high temperatures. Significantly increases the thermal stability of hot oils, effectively inhibits the increase in viscosity in high-quality motor oils and extends the drain interval. 2、Excellent compatibility. In composition with aromatic amines and sterically hindered phenols, it exhibits a synergistic effect. It is a basic component of high-quality additives for hydraulic oils. 3、Excellent high temperature thermal stability. The liquid form is convenient for dosing. Suitable for turbine oils, coolants and other industrial oils, ensuring trouble-free long-term operation of equipment.
T3358 Additive package for turbine oils
1、Compatible with viscosity grades 5W-30, 5W-40 and others, meets API SN, ILSAC GF-5 and JASO MA2 requirements. This additive package is the optimal solution for effective compounding. 2、At a dosage of 8.5%, it allows you to obtain all-season oils from base oils of groups II and III. As a specialized oil additive package, it has excellent detergent-dispersant properties. 3、Combines detergent additives, ashless dispersants and anti-oxidation/extreme pressure components. This engine oil additive package effectively suppresses the formation of sludge and varnish deposits, extending oil change intervals.
T9100 Additive package for four-stroke engine oils
1、Ready one-step formulation: with a dosage of only 6.5%, the package immediately meets the requirements of API SL and JASO MA2 - engine anti-wear protection and wet clutch friction properties are combined in one composition. 2、A complete set of functional components for recipe tasks. Base number 88.0–108 mg KOH/g; balanced calcium, zinc, phosphorus and nitrogen components provide a synergy of detergent, dispersant, antioxidant and anti-wear effects - the finished product is transparent and clean. 3、Possibility of flexible adjustment of viscosity classes. The package is compatible with non-dispersing viscosity additives and allows you to obtain a wide range of viscosity grades; production is carried out according to the Q/YHT004-2015 standard, each batch undergoes full control with a test report included.
T106Z (TBN330) High alkaline synthetic calcium dialkylbenzenesulfonate for lubricants
1、Alkalinity number (according to KOH) - not less than 330 mg KOH/g (according to the SH/T 0251 method); The high ability to neutralize acids provides oils and greases with a sufficient supply of alkalinity. 2、Calcium nanocarbonate micelles stabilization technology: after sulfonation, calcium treatment and carbonization, a stable system is formed. The retention of the alkaline number is at least 98%, and the stability of the indicators from batch to batch is ensured at the technology level. 3、Special modification for grease: The product is mainly for the preparation of grease, and can be used in the preparation of high-temperature bearing grease and other greases.
T3259 Additive package for heavy-duty diesel engine oils
1、This diesel engine oil additive contains quality detergent additives and soot dispersant, which significantly improves detergency at high temperatures. 2、A thoughtful combination of high-temperature antioxidants and anti-oxidation and anti-corrosion additives ensures precise control of the engine oil base number (TBN): acidic combustion products are effectively neutralized, and the engine is reliably protected from corrosion. 3、The product is suitable for formulations of heavy diesel oils of classes CI-4 and below: the oil base number (TBN) reserve is maintained sufficiently, the antioxidant and anti-wear properties remain at a high level, and the oil change interval is extended.
T2022 Additive package for two-stroke engine oils
1、To prepare two-stroke oil of the JASO FC class, only 2.2% (mass fraction when added to the oil) is sufficient - the dosage is highly economical, and bulk purchases allow you to effectively control the costs of the additive package and formulation. 2、Detergency and low smoke, high oil film strength: The product prevents clogging of the motorcycle exhaust system, reduces metal-to-metal wear, and extends engine life without loss of power. Suitable for oil for two-stroke engines with fuel injection and pre-mixing of fuel and oil. 3、Semi-synthetic two-stroke engine oil formulation, prepared with a small amount of polyisobutylene (molecular weight 1000) and a high flash point diluent, provides performance above the requirements of the Japanese JASO FC standard.
T154A Polyisobutylene succinimide
1、Ashless succinimide additive made from highly reactive polyisobutylene (Mn=1000) using thermal addition technology: the product does not contain chlorine and inhibits the formation of carbon deposits on pistons and varnish deposits. 2、Excellent detergent-dispersant properties: soot, sludge and varnish precursors formed during fuel combustion are kept suspended in the oil, which prevents varnish deposits from settling in the engine on the piston rings, in the oil passages and on the valve mechanism. 3、Suitable for compounding medium and high quality diesel and gasoline motor oils, as well as cylinder oils for low speed crosshead marine engines; especially recommended for environmentally friendly motor oils. The recommended dosage is 2.0–4.0% (by weight).
T161B Borated high molecular weight polyisobutylene succinimide with high viscosity and high nitrogen content
1、Compatible with the formulations of gasoline motor oils of API SG classes and higher, as well as API CF-4 diesel oils and higher; especially in demand in environmentally friendly motor oil formulas. The recommended dosage is 2.0–5.0% (by weight). 2、Effectively inhibits the growth of engine oil viscosity, combines anti-oxidation and anti-wear properties, improves oil compatibility with fluorine rubber seals and reduces high-temperature corrosion of copper-lead liners. The product does not contain chlorine. 3、Own production: five lines with an annual capacity of 60,000 tons, deviation of key parameters - no more than ±0.5%, share of suitable products - 99.9%. We maintain a balance between characteristics, delivery times and the total cost of the purchase.
T151B Borated polyisobutylene succinimide
1、Chlorine-free, ashless borated dispersant: The product has excellent detergent-dispersant ability, combines anti-oxidation and anti-wear properties, and improves oil compatibility with fluorine rubber seals. 2、T151B is used in the compounding of automatic transmission fluids (ATF) and other products, including automatic transmission additives: providing a detergent-dispersant effect, it helps control friction characteristics and reduces high-temperature corrosion of copper-lead liners. 3、Excellent formulation compatibility: In combination with detergent additives, the product is used in marine diesel and industrial oils; Small additives to transmission and hydraulic oils improve control of oxidative deposits during long-term operation.
T109D (TBN360) High alkaline calcium alkyl salicylate
1、High base number (340-380 mg KOH/g) and powerful acid neutralization: the product provides alkalinity reserve for heavy diesel oils, oils with extended drain intervals and operating conditions on high sulfur content fuels. 2、Excellent cleaning properties and thermal stability at high temperatures inhibit carbon deposits and varnish deposits on the piston; light color and low viscosity (≤50 mm²/s at 100 °C) simplify the introduction of the product into the formulation. 3、Good oil solubility, compatibility with sulfonates and hydrolytic stability facilitate compounding with other single additives; The product works effectively in combination with an antioxidant additive, extending oil life.
T4209 Additive package for transmission oils
1、The additive is made from high-quality extreme pressure, anti-wear and anti-oxidation components and provides a complex effect: 75w90 gear oil and GL-4 gear oil derived from it under severe operating conditions - high-speed shock loads and high torque - effectively prevent scuffing, wear, pitting and peeling of teeth, as well as their corrosion. 2、Production is carried out using hermetic technology with intelligent control of the entire process: the deviation of key parameters does not exceed ±0.5%, the share of suitable products reaches 99.9%. Before shipment, each batch undergoes full control, a test report is attached to the delivery - the quality is fully controlled and traceable. 3、Products are produced in-house: five production lines provide an annual capacity of 60,000 tons. We accept trial orders, provide volume discounts and work under OEM/ODM schemes - this allows us to offer an individual solution with a balance between characteristics, delivery time and total purchase cost.
T115B (TBN250) High alkaline sulfided calcium alkyl phenate
1、High acid-neutralizing ability: base number - 245–265 mg KOH/g. The product is used in the manufacture of medium and high-class motor oils, especially turbodiesel, and helps control the formation of carbon deposits on the piston. 2、Recommended dosages are clearly specified: 0.5-4.0% for motor oils and 25-35% for marine cylinder oil (mass fraction). The additive is easily added to the formulation and is compatible with other detergent additives and ashless dispersants. 3、We use a closed technological scheme and intelligent control at all stages of production: fluctuations in key parameters do not exceed ±0.5%, the share of quality products reaches 99.9%. Custom manufacturing (OEM/ODM) and test samples are available.
T202 Zinc salt of dialkyldithiophosphoric acid based on primary butyl and octyl groups
1、The raw materials and technology are transparent: the product is obtained from thiophosphoric acid, synthesized on the basis of butanol and octanol. It combines antioxidant, anti-wear and anti-corrosion effects and is suitable for motor, transmission and hydraulic oil formulations. 2、The product is suitable for compounding transmission oils and is considered as one of the options when selecting additives for transmission oils; recommended dosage is 0.5–3.0% (by weight). 3、Thermal stability is at a good level: the flash point in an open crucible is not lower than 180 °C, and the content of sulfur, phosphorus and zinc is standardized by clear indicators, which simplifies the selection according to the technical data sheet and the target recipe.
T8556 Organic molybdenum anti-friction additive
1、Energy saving: As a highly effective friction modifier, the product forms a boundary lubricating film on friction surfaces, which can significantly reduce the coefficient of friction, fuel consumption and cylinder wear. 2、Synergy of components: being a high-quality molybdenum additive, the product, when used together with antioxidant and anti-corrosion additives of the ZDDP series, as well as with aromatic amine antioxidants, gives a pronounced synergistic effect in terms of anti-wear and antioxidant properties. 3、Eco-friendly formulation: The product does not contain sulfur and phosphorus, has excellent oil solubility and, as an environmentally friendly molybdenum additive, is suitable for the production of high-quality gasoline and diesel engine oils and environmentally friendly lubricants, fully satisfying the most stringent environmental requirements.
T2007A Polyisobutylene succinic anhydride
1、The product is produced by thermal addition method from highly reactive polyisobutylene (Mn = 1000) and does not contain chlorine; ashless dispersants based on it are distinguished by excellent cleaning properties at high temperatures and good sludge dispersion at low temperatures. 2、This is an intermediate product of the succinic anhydride class, obtained by thermal addition: density 950 kg/m³, flash point 180 °C, kinematic viscosity 800 mm²/s, total acid number 110 mg KOH/g. 3、One product - several directions: based on it, bis-/polyalkenylsuccinimide and borated ashless dispersants are produced, as well as emulsifiers for emulsion explosives and technological additives for petrochemical production.