Products
-
T3259 Additive package for heavy-duty diesel engine oils
-
T2022 Additive package for two-stroke engine oils
-
T4209 Additive package for transmission oils
-
T109D (TBN360) High alkaline calcium alkyl salicylate
-
T9100 Additive package for four-stroke engine oils
-
T5033 Ashless anti-wear additive package for hydraulic oils
-
T321Sulfided isobutylene
-
T106A (TBN300) High alkaline linear alkyl benzene sulfonate calcium
-
L57 Octylbutyldiphenylamine
-
T5065 Additive package for thermal oils
-
T204 Basic zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
-
Zinc salt of dialkyldithiophosphoric acid based on secondary alkyl groups
-
T106D (TBN400) High alkaline synthetic calcium sulfonate based on long chain linear alkylbenzene
-
T115B (TBN250) High alkaline sulfided calcium alkyl phenate
-
T161B Borated high molecular weight polyisobutylene succinimide with high viscosity and high nitrogen content
-
T151B Borated polyisobutylene succinimide
T107 (TBN400) Highly alkaline synthetic magnesium sulfonate based on long-chain linear alkylbenzene
1、Low ash content. As a magnesium sulfonate detergent, the product effectively controls oil ash content: with a TBN of at least 395 mg KOH/g, it has excellent acid suppression properties and is an ideal base ingredient for the preparation of low ash oils.
2、Low turbidity and low sediment value: the product significantly reduces the deposition of impurities during oil storage and operation, reducing filtration costs and the risk of equipment clogging.
3、Detergency and corrosion protection: The additive is made from long-chain (C20-24) linear alkylbenzenesulfonic acid and provides good detergent, dispersant and anti-corrosion properties.
Description
marker
Product Description
Product T107 (TBN400) is a highly alkaline synthetic magnesium sulfonate made from long-chain (C20-24) linear alkylbenzenesulfonic acid. The key raw material is imported sulfonic acid, which guarantees high purity and consistent quality from the very beginning of production. Due to its light shade and low color number, the additive, after mixing, does not have a negative effect on the color of the finished oil and helps to improve the visual quality of the final lubricant product.
Industry problem
When developing new generation motor oils, manufacturers are faced with stringent low ash requirements imposed by exhaust gas aftertreatment systems (for example, DPF and GPF). Traditional high-alkaline detergent additives based on calcium sulfonate, despite their strong acid-suppressing ability, produce a significant amount of metal ash during combustion. Such ash often clogs neutralization systems, leading to their poisoning and failure, causing frequent alarms in vehicles and the need for repairs.
Solution
Our key solution is the highly alkaline synthetic magnesium sulfonate T107 (TBN400). The product is produced from long chain (C20-24) linear alkylbenzenesulfonic acid and has a total base number of at least 395 mg KOH/g. The magnesium additive system maintains a high alkaline reserve and excellent acid neutralization ability, while significantly reducing ash formation compared to traditional calcium salts. Thanks to this, blending plants easily meet the Low SAPS (low sulphated ash content) specification and produce high-quality motor oils for modern engines with exhaust gas aftertreatment systems.
Specifications
| Indicator | Norm | Test method |
| Appearance | Transparent brownish-red liquid | Visually |
| Density at 20 °C, kg/m³ | 1000.0 – 1200.0 | SH/T0604 |
| Flash point (open crucible), °C | ≥170 | GB/T3536 |
| Kinematic viscosity at 100 °C, mm²/s | 50.00 – 150.0 | GB/T265 |
| Total base number (in terms of KOH), mg/g | ≥395 | SH/T0251 |
| Magnesium content,% | 8.50 – 10.00 | SH/T0027 |
Applications
(1)Low ash oils (modern motor oils):Magnesium sulfonate detergent additive (TBN 400) is used in low sulfated ash formulations (LowSAPS), meets the requirements of modern motor oils for engines with exhaust gas aftertreatment systems and provides stable control of the ash content of the oil in the formulation.
(2)Premium motor oils:The product is intended primarily for the preparation of high-quality motor oils (gasoline and diesel), providing acid neutralization, detergent and dispersant action, as well as corrosion protection.
(3)Compositions with other additives:when properly combined with ashless dispersants and other components, the product simultaneously satisfies the requirements for detergent and dispersant properties of the oil.
Logistics and delivery
We ship products in export standard packaging (by default - steel barrels with a volume of 200 liters or tank containers, with pallets and protective covers from moisture and shock). Delivery is possible by sea, road and rail, as well as through multimodal schemes. Standard orders are shipped within 7-10 days after receiving advance payment; The full delivery time to Russia and Central Asian countries is about 15–20 days. Cargo tracking is provided along the entire route, transportation insurance is issued upon request, and after shipment, a full set of transport documents is immediately transferred so that the client receives the products without delay.
Service and guarantees
We provide a full range of services - from pre-sales consultation to after-sales service: free technical consultations, fast quotation within 2-3 business days and production of samples in 7-10 days. Comprehensive customization is supported according to OEM/ODM schemes - according to drawings, specified parameters, materials and packaging. Products have a 3-5 year warranty; Along with the product, an application manual and documentation in English or Russian are supplied, installation instructions and remote technical support are provided.
About us
We have been operating since April 2018 and specialize in the development, production and sale of additives for lubricants - a branch of fine chemistry. Own production is located on an area of about 46,667 m²: there are five lines for the production of additives with a total capacity of 60,000 tons per year, and the range includes more than 40 types of products. The company has more than 80 employees, including 12 engineering and technical specialists (including the chief engineer), 9 developers and 45 production workers. We have our own development department; We also cooperate with universities and research institutes, constantly improving recipes and technologies. Our technicians have provided services to companies such as Shell, BP, Castrol, Total, CNPC and Sinopec and therefore have a thorough understanding of their products and lubricant requirements.
Questions and answers
Question 1、In what industries are the products used?
Answer:The products are widely used in the oil and gas and chemical industries. Compared to conventional analogues, it has clear advantages in material class, sealing, operating pressure and temperature range, and service life (note: this answer is a quote from the general FAQ; in relation to our product, it is used primarily by blending plants for the preparation of premium and low-ash motor oils).
Question 2、What is the MOQ?
Answer:The minimum order quantity is one ton; We also accept orders in small quantities.
Question 3、Can oils of different brands and viscosities be mixed?
Answer:We do not recommend mixing. Mixing different viscosity grades results in unpredictable intermediate viscosities, and additive systems can interact with each other. If the oil has already been topped up, you should completely change it as soon as possible and go back to one brand. Before switching to products from another manufacturer, we recommend thoroughly flushing the system with flushing oil.
Question 4、Are customized formulations and OEM/ODM cooperation possible?
Answer:Yes, we develop special oil formulations taking into account the operating conditions of the client’s equipment and provide OEM/ODM services. Contact us - we will be glad to cooperate.
contact us
Related Popular Products
T5033 Ashless anti-wear additive package for hydraulic oils
1、Ash-free formula based on high-quality anti-wear and ash-free antioxidant additives. Does not contain antifoam additives or viscosity depressants. Optimally suitable for preparing anti-wear hydraulic oils of the HVLP oil class. 2、Designed for high-load conditions: withstands the operation of plunger pumps at pressures above 30.0 MPa and vane pumps at 14.0–17.5 MPa. An ideal complex for the production of high-quality hydraulic oils, including HVLP 46 oils. 3、Easy to use: just add 1.5% of the package to the base oil to obtain a composition that complies with the GB11118.1-94 L-HM standard. Compatible with viscosities from N32 to N100, helping you consistently produce your entire range of HVLP oil-based products.
T115B (TBN250) High alkaline sulfided calcium alkyl phenate
1、High acid-neutralizing ability: base number - 245–265 mg KOH/g. The product is used in the manufacture of medium and high-class motor oils, especially turbodiesel, and helps control the formation of carbon deposits on the piston. 2、Recommended dosages are clearly specified: 0.5-4.0% for motor oils and 25-35% for marine cylinder oil (mass fraction). The additive is easily added to the formulation and is compatible with other detergent additives and ashless dispersants. 3、We use a closed technological scheme and intelligent control at all stages of production: fluctuations in key parameters do not exceed ±0.5%, the share of quality products reaches 99.9%. Custom manufacturing (OEM/ODM) and test samples are available.
T2007A Polyisobutylene succinic anhydride
1、The product is produced by thermal addition method from highly reactive polyisobutylene (Mn = 1000) and does not contain chlorine; ashless dispersants based on it are distinguished by excellent cleaning properties at high temperatures and good sludge dispersion at low temperatures. 2、This is an intermediate product of the succinic anhydride class, obtained by thermal addition: density 950 kg/m³, flash point 180 °C, kinematic viscosity 800 mm²/s, total acid number 110 mg KOH/g. 3、One product - several directions: based on it, bis-/polyalkenylsuccinimide and borated ashless dispersants are produced, as well as emulsifiers for emulsion explosives and technological additives for petrochemical production.
T4209 Additive package for transmission oils
1、The additive is made from high-quality extreme pressure, anti-wear and anti-oxidation components and provides a complex effect: 75w90 gear oil and GL-4 gear oil derived from it under severe operating conditions - high-speed shock loads and high torque - effectively prevent scuffing, wear, pitting and peeling of teeth, as well as their corrosion. 2、Production is carried out using hermetic technology with intelligent control of the entire process: the deviation of key parameters does not exceed ±0.5%, the share of suitable products reaches 99.9%. Before shipment, each batch undergoes full control, a test report is attached to the delivery - the quality is fully controlled and traceable. 3、Products are produced in-house: five production lines provide an annual capacity of 60,000 tons. We accept trial orders, provide volume discounts and work under OEM/ODM schemes - this allows us to offer an individual solution with a balance between characteristics, delivery time and total purchase cost.
High molecular weight emulsifier for emulsion explosives
1、The product is based on highly active polyisobutylene succinic anhydride; it is suitable for lines for the production of emulsion explosives of any configuration, characterized by small micelles and good emulsifying ability during use. 2、The emulsion explosives obtained on its basis are water-resistant and acid-resistant, stable during storage and have good pumpability; The recommended dosage is 1.0–2.0%. 3、The finished explosive emulsion is homogeneous and stable; The product is equally suitable for bulk and packaged lines. Production is localized, the supply chain is streamlined, which allows us to find a balance between quality, delivery time and the total cost of purchase.
T151B Borated polyisobutylene succinimide
1、Chlorine-free, ashless borated dispersant: The product has excellent detergent-dispersant ability, combines anti-oxidation and anti-wear properties, and improves oil compatibility with fluorine rubber seals. 2、T151B is used in the compounding of automatic transmission fluids (ATF) and other products, including automatic transmission additives: providing a detergent-dispersant effect, it helps control friction characteristics and reduces high-temperature corrosion of copper-lead liners. 3、Excellent formulation compatibility: In combination with detergent additives, the product is used in marine diesel and industrial oils; Small additives to transmission and hydraulic oils improve control of oxidative deposits during long-term operation.
T106Z (TBN330) High alkaline synthetic calcium dialkylbenzenesulfonate for lubricants
1、Alkalinity number (according to KOH) - not less than 330 mg KOH/g (according to the SH/T 0251 method); The high ability to neutralize acids provides oils and greases with a sufficient supply of alkalinity. 2、Calcium nanocarbonate micelles stabilization technology: after sulfonation, calcium treatment and carbonization, a stable system is formed. The retention of the alkaline number is at least 98%, and the stability of the indicators from batch to batch is ensured at the technology level. 3、Special modification for grease: The product is mainly for the preparation of grease, and can be used in the preparation of high-temperature bearing grease and other greases.
T165A High molecular weight polyisobutylene succinimide
1、High molecular weight ashless dispersing agent with a nitrogen content of at least 1.90%: the product is obtained using thermal addition technology, it holds soot and sludge in suspension well, and is especially effective in dispersing low-temperature sludge. 2、Does not contain chlorine, alkaline number is not lower than 40.0 mg KOH/g; is produced according to the corporate standard Q/YHT007-2015 and is suitable for formulations of high-quality gasoline oils of API SH level and higher. 3、Based on highly active polyisobutylene and thermal joining technology: the product copes well with low-temperature sludge and soot, provides good detergent-dispersant efficiency and covers the needs for compounding oils of API SH class and higher.
T8556 Organic molybdenum anti-friction additive
1、Energy saving: As a highly effective friction modifier, the product forms a boundary lubricating film on friction surfaces, which can significantly reduce the coefficient of friction, fuel consumption and cylinder wear. 2、Synergy of components: being a high-quality molybdenum additive, the product, when used together with antioxidant and anti-corrosion additives of the ZDDP series, as well as with aromatic amine antioxidants, gives a pronounced synergistic effect in terms of anti-wear and antioxidant properties. 3、Eco-friendly formulation: The product does not contain sulfur and phosphorus, has excellent oil solubility and, as an environmentally friendly molybdenum additive, is suitable for the production of high-quality gasoline and diesel engine oils and environmentally friendly lubricants, fully satisfying the most stringent environmental requirements.
T106D (TBN400) High alkaline synthetic calcium sulfonate based on long chain linear alkylbenzene
1、We use long-chain (C₂₀–₂₄) linear alkylbenzenesulfonic acid as raw materials; The product is suitable for the manufacture of calcium sulfonate grease, has a strong neutralizing ability, as well as detergent-dispersant and anti-corrosion effects. 2、Ultra-high alkaline formula: alkaline number - not lower than 395 mg KOH/g, retention of alkaline number - not less than 98%. Even when operating on high-sulfur fuel, the product contains a sufficient supply of acid neutralization. 3、The main application is medium and high-quality motor oils, as well as marine oils; The recommended dosage is 0.5–25% (mass fraction).
T321Sulfided isobutylene
1、Excellent extreme durability and anti-wear properties, high sulfur content. Under load, it quickly forms an iron sulfide boundary film, effectively increasing the welding load. 2、Excellent solubility in oils. Suitable not only for all types of gear oils, but also as a high-quality additive in coolant that meets the requirements of heavy cutting conditions. 3、Wide scope of application. The recommended dosage is 1.5–5.0%. The product is widely used in the preparation of medium and high-grade gear oils, anti-friction hydraulic oils and greases; mixing is not difficult.
T9100 Additive package for four-stroke engine oils
1、Ready one-step formulation: with a dosage of only 6.5%, the package immediately meets the requirements of API SL and JASO MA2 - engine anti-wear protection and wet clutch friction properties are combined in one composition. 2、A complete set of functional components for recipe tasks. Base number 88.0–108 mg KOH/g; balanced calcium, zinc, phosphorus and nitrogen components provide a synergy of detergent, dispersant, antioxidant and anti-wear effects - the finished product is transparent and clean. 3、Possibility of flexible adjustment of viscosity classes. The package is compatible with non-dispersing viscosity additives and allows you to obtain a wide range of viscosity grades; production is carried out according to the Q/YHT004-2015 standard, each batch undergoes full control with a test report included.
T109D (TBN360) High alkaline calcium alkyl salicylate
1、High base number (340-380 mg KOH/g) and powerful acid neutralization: the product provides alkalinity reserve for heavy diesel oils, oils with extended drain intervals and operating conditions on high sulfur content fuels. 2、Excellent cleaning properties and thermal stability at high temperatures inhibit carbon deposits and varnish deposits on the piston; light color and low viscosity (≤50 mm²/s at 100 °C) simplify the introduction of the product into the formulation. 3、Good oil solubility, compatibility with sulfonates and hydrolytic stability facilitate compounding with other single additives; The product works effectively in combination with an antioxidant additive, extending oil life.
T5022 Anti-wear additive package for hydraulic oils
1、Meet stringent standards: The product is designed specifically for industrial hydraulic systems and fully meets the oil requirements of DIN 51524 and ISO 11158 standard. This ensures that the resulting oil when mixed has excellent anti-wear and anti-oxidation properties, effectively extending the life of equipment. 2、Versatile application: suitable for injection molding machines, machine tools and industrial hydraulic stations. Whether it is conventional HLP hydraulic oil or high-pressure systems, the product provides reliable protection for pumps and valves, adapting to a variety of severe operating conditions. 3、Flexible Formulation Solutions: We offer customized formulation support for different base oils and viscosity requirements. It can help you easily prepare high-quality HLP oil, effectively reduce your total procurement costs and improve the competitiveness of your blending plant.
Zinc salt of dialkyldithiophosphoric acid based on secondary alkyl groups
1、Three effects in one additive: antioxidant, anti-wear and corrosion protection. Zinc dithiophosphate (zddp) inhibits oil oxidation, prevents bearing corrosion and reduces cam lifter wear, providing comprehensive, all-around engine oil protection. 2、Light yellow transparent liquid, flash point not lower than 160 °C. Mass fraction of sulfur 14.0–16.0%, phosphorus 6.5–8.0%, zinc 6.5–9.0%, pH - no less than 5.80. The product is manufactured according to the corporate standard Q/YHT006, undergoes full control before shipment, and a test report is attached to each batch. 3、Own production: 5 technological lines, annual capacity 60,000 tons. The deviation of key parameters is kept within ±0.5%, the share of suitable products is 99.9%. Consistent quality from batch to batch, a balanced combination of performance characteristics, delivery speed and total purchasing costs.
T203 Zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
1、The additive is made from thiophosphoric acid obtained on the basis of octanol: the structure of the zinc salt provides excellent thermal stability and reliable anti-wear and antioxidant protection in medium and high-class diesel oils, featuring high thermal-oxidative stability. 2、Hydrolytic stability and antioxidant properties are excellent: the content of sulfur, phosphorus and zinc is strictly controlled according to corporate standards, the flash point is not lower than 180 ° C, so the product is suitable for anti-wear hydraulic oil formulations as hydraulic oil additives. 3、Each batch undergoes full control according to the corporate standard Q/YHT006-2015 and is accompanied by a test report; As a gear oil additive, the product is stable from batch to batch and helps balance costs when purchasing in bulk.