Products
-
T151B Borated polyisobutylene succinimide
-
High molecular weight emulsifier for emulsion explosives
-
T106D (TBN400) High alkaline synthetic calcium sulfonate based on long chain linear alkylbenzene
-
T109D (TBN360) High alkaline calcium alkyl salicylate
-
T106Z (TBN330) High alkaline synthetic calcium dialkylbenzenesulfonate for lubricants
-
T106A (TBN300) High alkaline linear alkyl benzene sulfonate calcium
-
Zinc salt of dialkyldithiophosphoric acid based on secondary alkyl groups
-
T104A (TBN25) Synthetic low base number calcium alkyl benzene sulfonate
-
T154A Polyisobutylene succinimide
-
T5022 Anti-wear additive package for hydraulic oils
-
T3259 Additive package for heavy-duty diesel engine oils
-
T107 (TBN400) Highly alkaline synthetic magnesium sulfonate based on long-chain linear alkylbenzene
-
T4209 Additive package for transmission oils
-
T204 Basic zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
-
T3358 Additive package for turbine oils
-
T2007A Polyisobutylene succinic anhydride
T5033 Ashless anti-wear additive package for hydraulic oils
1、Ash-free formula based on high-quality anti-wear and ash-free antioxidant additives. Does not contain antifoam additives or viscosity depressants. Optimally suitable for preparing anti-wear hydraulic oils of the HVLP oil class.
2、Designed for high-load conditions: withstands the operation of plunger pumps at pressures above 30.0 MPa and vane pumps at 14.0–17.5 MPa. An ideal complex for the production of high-quality hydraulic oils, including HVLP 46 oil.
3、Easy to use: just add 1.5% of the packet to the base oil to obtain a composition that meets the GB11118.1-94 L-HM standard. Compatible with viscosities from N32 to N100, helping you consistently produce your entire range of HVLP oil-based products.
Description
marker
About the product
Complex ashless high-pressure anti-wear additive TH5033 is designed specifically for severe operating conditions and is widely in demand in large construction equipment - loaders, excavators, dump trucks. In practice, when preparing, it is enough to add 1.5% of this product and the required amount of anti-foam additive to a Group I or II base oil to obtain an HVLP 46 oil that meets the GB11118.1-94 L-HM standard. This eliminates the need for time-consuming debugging of the recipe.
Specifications
| Indicator | Typical value | Test method |
| Density (20 °C), kg/m³ | Measured | GB/T1884 |
| Kinematic viscosity (100 °C), mm²/s | 3.0 | GB/T265 |
| Flash point (open crucible), °C | 100 | GB/T3536 |
| Phosphorus content, wt. % | 2.6 | SH/T0296 |
| Sulfur content, wt. % | 4.5 | GB/T388 |
| Mechanical impurities, wt. % | 0.1 | GB/T511 |
Note:The specific applicable standards, performance characteristics and scope of application are determined by technical data sheets (TDS), test reports and customer formulation verification results supplied with each product lot.
How to solve the problem of preparing ashless hydraulic oils under high pressure?
As lube oil plant purchasing specialists, we often face a real challenge when selecting ashless antiwear complexes for hydraulic oils: poor formulation adaptability, which makes the resulting oil difficult to meet both the requirements of high pressure, antiwear protection and environmentally friendly ashless formulations. This directly leads to complaints from end consumers - owners of excavators and loaders - about accelerated wear of equipment or clogged filters. As a result, after-sales service costs are rising and the share of repeat purchases of our products in the high-tech construction equipment market is noticeably decreasing.
Solution: The ashless high-pressure anti-wear complex we offer, TH5033, provides a clear technical answer. The product is a composition of high-quality anti-wear additives and ash-free antioxidants; There are no anti-foam additives or viscosity depressants in its formulation. Using this product, the buyer only needs to add 1.5% of the complex to a Group I or II base oil to obtain formulations with viscosity from N32 to N100, complying with the GB11118.1-94 L-HM standard. This not only simplifies the preparation process, but also ensures that the oil will withstand the harsh high-pressure conditions of plunger pumps (>30.0 MPa) and vane pumps (14.0-17.5 MPa). For the buyer, this means reduced costs for formula development and increased productivity: high-quality HVLP 46 oil can be consistently produced, thereby increasing the reliability of the final equipment and strengthening competitiveness in the market.
Application
The product is widely used in the hydraulic systems of large construction equipment - loaders, excavators, dump trucks, helping manufacturers supply customers with high-quality HVLP 46 oil and ensure stable operation of high-pressure equipment. For customers requiring compliance with GB11118.1-94 L-HM standard, this product becomes the optimal choice for the production of HVLP oil and other mineral hydraulic oils of various viscosity grades, effectively reducing equipment wear.
About the company
The company was founded in April 2018 and is a fine chemicals manufacturer specializing in the development, production and sale of lubricating oil additives. The own plant occupies an area of about 46,667 m², it operates 5 production lines for the production of additives for lubricants with an annual capacity of 60,000 tons; the range includes more than 40 types of products. The company has a staff of over 80 people, including 12 chief specialists and engineering and technical personnel, 9 scientists and 45 operators. Our technical team has already provided services to such domestic and foreign companies as Shell, BP, Castrol, Total, PetroChina, Sinopec, and is well acquainted with the products and practical problems in the field of lubricants application.
Service guarantees
We provide a full service cycle: individual selections based on operating parameters and oil type, free technical consultations, price calculation within 2-3 business days; Sample production time is 7–10 days, trial orders of small batches are possible; launching an order into production - 3-5 days, shipment - 7-10 days, urgent execution is available. Products are tested according to state and industry standards before shipment; a test report is attached to the batch; Acceptance at the factory or by an independent third party is possible. The warranty period is determined by the terms of the contract, remote technical support is provided, and in case of disagreement, the product is returned for examination to an independent organization. We accept T/T payment, provide discounts for bulk purchases and OEM/ODM cooperation.
Logistics and transportation
By default, export standard packaging is used: 200 liter steel drums or cubic containers, palleted with film to protect against shock and moisture. Custom logo marking is possible, as well as neutral packaging or delivery in fumigated wooden boxes; The lot is accompanied by a label and packing slip. Sea, land, rail and multimodal transportation are supported, cooperation with the forwarder specified by the customer is possible. Shipment is carried out 7–10 days after signing the contract and payment; Delivery to Russia and Central Asia takes about 15–20 days, urgent delivery is available. We provide end-to-end cargo tracking, transportation insurance and a full set of transport documents - bill of lading, waybills, etc.
Questions and answers
Q1、Which industries mainly apply the product?
A:Widely used in hydraulic systems of large construction equipment - loaders, excavators, dump trucks. This is a reliable additive solution for plants producing high-quality hydraulic oils, including HVLP 46 oil.
Q2、How to choose a brand suitable for specific operating conditions?
A:The customer just needs to provide the key parameters - oil type, target viscosity class and operating conditions - and our team will offer a recommended brand within 2-3 business days. If the choice of brand is in doubt, you can first request test samples.
Q3、Are you a manufacturer or trading company?
A:We are an original factory with our own production workshops and testing equipment. Customers are encouraged to visit our facility in person.
Q4、Is it possible to develop customized formulations and OEM/ODM cooperation?
A:We can develop special oil formulation according to customer requirements and provide OEM/ODM services. We will be glad to cooperate - please contact us.
contact us
Related Popular Products
Zinc salt of dialkyldithiophosphoric acid based on secondary alkyl groups
1、Three effects in one additive: antioxidant, anti-wear and corrosion protection. Zinc dithiophosphate (zddp) inhibits oil oxidation, prevents bearing corrosion and reduces cam lifter wear, providing comprehensive, all-around engine oil protection. 2、Light yellow transparent liquid, flash point not lower than 160 °C. Mass fraction of sulfur 14.0–16.0%, phosphorus 6.5–8.0%, zinc 6.5–9.0%, pH - no less than 5.80. The product is manufactured according to the corporate standard Q/YHT006, undergoes full control before shipment, and a test report is attached to each batch. 3、Own production: 5 technological lines, annual capacity 60,000 tons. The deviation of key parameters is kept within ±0.5%, the share of suitable products is 99.9%. Consistent quality from batch to batch, a balanced combination of performance characteristics, delivery speed and total purchasing costs.
T3358 Additive package for turbine oils
1、Compatible with viscosity grades 5W-30, 5W-40 and others, meets API SN, ILSAC GF-5 and JASO MA2 requirements. This additive package is the optimal solution for effective compounding. 2、At a dosage of 8.5%, it allows you to obtain all-season oils from base oils of groups II and III. As a specialized oil additive package, it has excellent detergent-dispersant properties. 3、Combines detergent additives, ashless dispersants and anti-oxidation/extreme pressure components. This engine oil additive package effectively suppresses the formation of sludge and varnish deposits, extending oil change intervals.
T2022 Additive package for two-stroke engine oils
1、To prepare two-stroke oil of the JASO FC class, only 2.2% (mass fraction when added to the oil) is sufficient - the dosage is highly economical, and bulk purchases allow you to effectively control the costs of the additive package and formulation. 2、Detergency and low smoke, high oil film strength: The product prevents clogging of the motorcycle exhaust system, reduces metal-to-metal wear, and extends engine life without loss of power. Suitable for oil for two-stroke engines with fuel injection and pre-mixing of fuel and oil. 3、Semi-synthetic two-stroke engine oil formulation, prepared with a small amount of polyisobutylene (molecular weight 1000) and a high flash point diluent, provides performance above the requirements of the Japanese JASO FC standard.
T109D (TBN360) High alkaline calcium alkyl salicylate
1、High base number (340-380 mg KOH/g) and powerful acid neutralization: the product provides alkalinity reserve for heavy diesel oils, oils with extended drain intervals and operating conditions on high sulfur content fuels. 2、Excellent cleaning properties and thermal stability at high temperatures inhibit carbon deposits and varnish deposits on the piston; light color and low viscosity (≤50 mm²/s at 100 °C) simplify the introduction of the product into the formulation. 3、Good oil solubility, compatibility with sulfonates and hydrolytic stability facilitate compounding with other single additives; The product works effectively in combination with an antioxidant additive, extending oil life.
T151B Borated polyisobutylene succinimide
1、Chlorine-free, ashless borated dispersant: The product has excellent detergent-dispersant ability, combines anti-oxidation and anti-wear properties, and improves oil compatibility with fluorine rubber seals. 2、T151B is used in the compounding of automatic transmission fluids (ATF) and other products, including automatic transmission additives: providing a detergent-dispersant effect, it helps control friction characteristics and reduces high-temperature corrosion of copper-lead liners. 3、Excellent formulation compatibility: In combination with detergent additives, the product is used in marine diesel and industrial oils; Small additives to transmission and hydraulic oils improve control of oxidative deposits during long-term operation.
T161B Borated high molecular weight polyisobutylene succinimide with high viscosity and high nitrogen content
1、Compatible with the formulations of gasoline motor oils of API SG classes and higher, as well as API CF-4 diesel oils and higher; especially in demand in environmentally friendly motor oil formulas. The recommended dosage is 2.0–5.0% (by weight). 2、Effectively inhibits the growth of engine oil viscosity, combines anti-oxidation and anti-wear properties, improves oil compatibility with fluorine rubber seals and reduces high-temperature corrosion of copper-lead liners. The product does not contain chlorine. 3、Own production: five lines with an annual capacity of 60,000 tons, deviation of key parameters - no more than ±0.5%, share of suitable products - 99.9%. We maintain a balance between characteristics, delivery times and the total cost of the purchase.
T3259 Additive package for heavy-duty diesel engine oils
1、This diesel engine oil additive contains quality detergent additives and soot dispersant, which significantly improves detergency at high temperatures. 2、A thoughtful combination of high-temperature antioxidants and anti-oxidation and anti-corrosion additives ensures precise control of the engine oil base number (TBN): acidic combustion products are effectively neutralized, and the engine is reliably protected from corrosion. 3、The product is suitable for formulations of heavy diesel oils of classes CI-4 and below: the oil base number (TBN) reserve is maintained sufficiently, the antioxidant and anti-wear properties remain at a high level, and the oil change interval is extended.
T165A High molecular weight polyisobutylene succinimide
1、High molecular weight ashless dispersing agent with a nitrogen content of at least 1.90%: the product is obtained using thermal addition technology, it holds soot and sludge in suspension well, and is especially effective in dispersing low-temperature sludge. 2、Does not contain chlorine, alkaline number is not lower than 40.0 mg KOH/g; is produced according to the corporate standard Q/YHT007-2015 and is suitable for formulations of high-quality gasoline oils of API SH level and higher. 3、Based on highly active polyisobutylene and thermal joining technology: the product copes well with low-temperature sludge and soot, provides good detergent-dispersant efficiency and covers the needs for compounding oils of API SH class and higher.
L57 Octylbutyldiphenylamine
1、High anti-oxidation efficiency at high temperatures. Significantly increases the thermal stability of hot oils, effectively inhibits the increase in viscosity in high-quality motor oils and extends the drain interval. 2、Excellent compatibility. In composition with aromatic amines and sterically hindered phenols, it exhibits a synergistic effect. It is a basic component of high-quality additives for hydraulic oils. 3、Excellent high temperature thermal stability. The liquid form is convenient for dosing. Suitable for turbine oils, coolants and other industrial oils, ensuring trouble-free long-term operation of equipment.
T4209 Additive package for transmission oils
1、The additive is made from high-quality extreme pressure, anti-wear and anti-oxidation components and provides a complex effect: 75w90 gear oil and GL-4 gear oil derived from it under severe operating conditions - high-speed shock loads and high torque - effectively prevent scuffing, wear, pitting and peeling of teeth, as well as their corrosion. 2、Production is carried out using hermetic technology with intelligent control of the entire process: the deviation of key parameters does not exceed ±0.5%, the share of suitable products reaches 99.9%. Before shipment, each batch undergoes full control, a test report is attached to the delivery - the quality is fully controlled and traceable. 3、Products are produced in-house: five production lines provide an annual capacity of 60,000 tons. We accept trial orders, provide volume discounts and work under OEM/ODM schemes - this allows us to offer an individual solution with a balance between characteristics, delivery time and total purchase cost.
L135 Di-nonyldiphenylamine
1、High-temperature amine antioxidant with increased resistance: based on diphenylamine, which at high temperatures continuously suppresses the late stage of oxidation of motor oil and lasts longer than conventional bulk-hindered phenols, increasing the oil change interval. 2、Good compatibility and synergistic effect. In combination with other aromatic amines and bulk-hindered phenols, mutual reinforcement occurs, making the product suitable for formulations of premium motor oils, thermal oils, transformer oils and greases. 3、Excellent thermal stability at high temperatures. As an additive for hydraulic oil, it is used in high-temperature hydraulic systems of injection molding machines and steel-casting machines; At the same time, it inhibits the growth of the acid number of transformer oil.
T104A (TBN25) Synthetic low base number calcium alkyl benzene sulfonate
1、Low-alkaline synthetic additives for the production of oils with a high soap content combine detergent, anti-corrosion and anti-foam properties: thanks to the TBN 25 indicator, they are suitable for conventional motor oil formulations, and the finished oil is transparent and has an even light shade. 2、Alkali number - 20.0–35.0 mg/g, flash point - not lower than 180 °C; the product is manufactured according to the corporate standard Q/YHT003-2015 and undergoes full quality control upon leaving the factory - a test report is attached to each batch. 3、Production is localized on our own site with a developed supply chain: five production lines provide an annual capacity of 60,000 tons, which allows us to find a balance between quality, delivery speed and total procurement cost.
High molecular weight emulsifier for emulsion explosives
1、The product is based on highly active polyisobutylene succinic anhydride; it is suitable for lines for the production of emulsion explosives of any configuration, characterized by small micelles and good emulsifying ability during use. 2、The emulsion explosives obtained on its basis are water-resistant and acid-resistant, stable during storage and have good pumpability; The recommended dosage is 1.0–2.0%. 3、The finished explosive emulsion is homogeneous and stable; The product is equally suitable for bulk and packaged lines. Production is localized, the supply chain is streamlined, which allows us to find a balance between quality, delivery time and the total cost of purchase.
T154A Polyisobutylene succinimide
1、Ashless succinimide additive made from highly reactive polyisobutylene (Mn=1000) using thermal addition technology: the product does not contain chlorine and inhibits the formation of carbon deposits on pistons and varnish deposits. 2、Excellent detergent-dispersant properties: soot, sludge and varnish precursors formed during fuel combustion are kept suspended in the oil, which prevents varnish deposits from settling in the engine on the piston rings, in the oil passages and on the valve mechanism. 3、Suitable for compounding medium and high quality diesel and gasoline motor oils, as well as cylinder oils for low speed crosshead marine engines; especially recommended for environmentally friendly motor oils. The recommended dosage is 2.0–4.0% (by weight).
T204 Basic zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
1、High pH value. The product is a quality alkaline additive widely used for compounding anti-wear hydraulic oils, mid- and high-grade motor oils, and medium-speed marine oils. 2、Outstanding anti-wear properties. Under conditions of high loads and intense friction, this alkaline oil additive quickly forms a stable protective film, significantly reducing wear on metal surfaces and extending the service life of equipment. 3、Excellent compatibility. As a high-quality alkaline oil additive, the product is easily combined with base mono additives, including extreme pressure sulfur additives, and provides a synergistic effect in transmission and industrial gear oils.
T205 Zinc salt of dialkyldithiophosphoric acid based on propyl, secondary and primary octyl groups
1、The product is synthesized on the basis of thiophosphoric acid obtained from a mixture of primary and secondary alcohols - propyl and octyl: due to the excellent anti-wear properties of the oil and high hydrolytic stability, it is the main additive in gasoline oil for anti-wear and antioxidant protection of high-quality motor oils. 2、The content of sulfur, phosphorus and zinc - 16.00-18.50%, 8.00-9.50% and 9.00-10.80%, respectively - is maintained according to the corporate standard Q/YHT006-2015; Each batch undergoes full control at the exit from the factory, a test report is attached to the delivery, so the lubricating properties of the oil are stable from batch to batch. 3、Multifunctional base anti-wear additive with four functions - anti-oxidation, anti-wear, extreme pressure and anti-corrosion: protects the camshaft, tappets and cylinder liners, and is suitable for compounding high-quality motor oils with additives into gasoline oil.