Products
-
T107 (TBN400) Highly alkaline synthetic magnesium sulfonate based on long-chain linear alkylbenzene
-
T5033 Ashless anti-wear additive package for hydraulic oils
-
T151B Borated polyisobutylene succinimide
-
T154A Polyisobutylene succinimide
-
T5022 Anti-wear additive package for hydraulic oils
-
T115B (TBN250) High alkaline sulfided calcium alkyl phenate
-
L57 Octylbutyldiphenylamine
-
T2007A Polyisobutylene succinic anhydride
-
T3259 Additive package for heavy-duty diesel engine oils
-
T8556 Organic molybdenum anti-friction additive
-
T161B Borated high molecular weight polyisobutylene succinimide with high viscosity and high nitrogen content
-
Zinc salt of dialkyldithiophosphoric acid based on secondary alkyl groups
-
T165A High molecular weight polyisobutylene succinimide
-
T5065 Additive package for thermal oils
-
T9100 Additive package for four-stroke engine oils
-
T109D (TBN360) High alkaline calcium alkyl salicylate
T205 Zinc salt of dialkyldithiophosphoric acid based on propyl, secondary and primary octyl groups
1、The product is synthesized on the basis of thiophosphoric acid obtained from a mixture of primary and secondary alcohols - propyl and octyl: due to the excellent anti-wear properties of the oil and high hydrolytic stability, it is the main additive in gasoline oil for anti-wear and antioxidant protection of high-quality motor oils.
2、The content of sulfur, phosphorus and zinc - 16.00-18.50%, 8.00-9.50% and 9.00-10.80%, respectively - is maintained according to the corporate standard Q/YHT006-2015; Each batch undergoes full control at the exit from the factory, a test report is attached to the delivery, so the lubricating properties of the oil are stable from batch to batch.
3、Multifunctional base anti-wear additive with four functions - anti-oxidation, anti-wear, extreme pressure and anti-corrosion: protects the camshaft, tappets and cylinder liners, and is suitable for compounding high-quality motor oils with additives into gasoline oil.
Description
marker
Product Description
T205 is an anti-wear zinc dialkyldithiophosphate (ZDDP). The introduction of the product into the oil inhibits its oxidation: the additive provides stable anti-wear properties of the oil, antioxidant and anti-corrosion protection, and good hydrolytic stability preserves the lubricating properties of the oil even when exposed to moisture. Zinc dialkyldithiophosphates combine four functions - antioxidant, anti-wear, extreme pressure and anti-corrosion - and are considered an indispensable base additive in almost any lubricating oil formulation. The product is focused mainly on anti-wear and antioxidant protection of high-quality gasoline motor oils: it is a premium gasoline oil additive, the recommended dosage is 0.5-2.5% (by weight).
Typical problem and its solution
Question: what to do if, when compounding high-quality gasoline motor oils, the instability of the anti-wear properties of the oil and the content of active components from batch to batch—the key indicators “float”?
Our solution: The composition of additives in gasoline oil is fixed at the raw material level: the product is synthesized from thiophosphoric acid based on a mixture of propyl and octyl alcohols, which eliminates formulation drift between batches. Sulfur, phosphorus, zinc, pH and flash point are maintained within strict limits (S 16.00-18.50%, P 8.00-9.50%, Zn 9.00-10.80%, pH ≥ 5.80, flash point ≥ 170 °C), and excellent antioxidant resistance, high hydrolytic stability and stable lubrication properties of the oil are three qualities that are valued in high-quality gasoline oils. When the active components are stable, the anti-wear properties of the finished product oil are stable, and the customer does not have to revise the recipe.
Specifications
| Indicator | Norm | Test method |
| Appearance | Transparent liquid of light yellow color | Visual control |
| Density at 20 °C, kg/m³ | 1080.0–1180.0 | SH/T0604 |
| Flash point (open crucible), °C | Not lower than 170 | GB/T3536 |
| Sulfur (mass fraction), % | 16.00–18.50 | SH/T0303 |
| Phosphorus (mass fraction), % | 8.00–9.50 | SH/T0296 |
| Zinc (mass fraction), % | 9.00–10.80 | SH/T0226 |
| pH value | Not lower than 5.80 | Q/YHT006 Appendix A |
Note:the product is manufactured according to the corporate standard Q/YHT006-2015. The specific applicable standards, ratings and applications are determined by the technical data sheet (TDS) and test report supplied with the product, as well as the results of customer formulation validation.
Applications
The products are designed primarily for oil mixing plants and are used in the production of high-quality gasoline motor oils: in the line of gasoline oil additives, ZDDP takes the place of the basic anti-wear additive - this is the main component that ensures the anti-wear properties of the oil and antioxidant protection of the camshaft, pushers and cylinder liners. The stability of the additive directly determines the lubricating properties of the oil in the finished product.
At the same time, the product is used in anti-wear hydraulic oils (HLP) and high pressure systems, protecting pump plungers and valves; in combination with sulfur-containing extreme pressure additives - in automotive and industrial transmission oils; provides anti-oxidation, anti-corrosion and anti-friction properties in cutting and grinding fluids; also used alone or in a composition for corrosion protection between operations.
The customer can select the product directly by oil type, engine or equipment operating mode and target characteristics; a team of developers and technical support is ready to help with selection, adaptation to a specific recipe and development of individual solutions.
About us
We have been operating since April 2018: we are a fine chemicals manufacturer specializing in the development, production and sale of additives for lubricating oils. The company's own production site occupies approximately 46,667 m²: five additive production lines provide an annual capacity of 60,000 tons, and the range includes more than 40 products. The company's staff exceeds 80 people: 12 engineering and technical specialists, 9 research and development employees and 45 production workers. Our technical team has provided services to companies such as Shell, BP, Castrol, Total, CNPC and Sinopec and is therefore very familiar with the lubricating properties of oils and lubricant market requirements.
Service, guarantees and logistics
（1）Service: We provide a full service cycle - we select the product according to the operating parameters and type of oil, provide free consultation and prepare a commercial offer within 2-3 business days. Sample production takes 7-10 days, trial orders are accepted in small batches; the order is put into production in 3–5 days and shipped in 7–10 days, urgent shipment is possible. Products are tested according to state and corporate standards, a test report is attached to the delivery, and inspection at the factory or by a third party is possible. The warranty period is 3–5 years (according to the contract), remote technical support is provided, disputed samples are sent for independent examination. Payment is by bank transfer (T/T), discounts are available for wholesale buyers, OEM/ODM channels are available.
（2）Logistics: By default, we ship products in 200 liter steel barrels, flexi tanks or ISO containers - packaging meets export standards; pallets and covers protect containers from rolling, shock and moisture. Customer's logo printing, neutral packaging and fumigation-free wooden boxes are available. Delivery - by sea, land and rail, as well as multimodal schemes; We also work with the customer’s forwarder. Shipment - 7–10 days after signing the contract and receiving advance payment; Delivery time to Russia and Central Asia is about 15–20 days. We provide end-to-end cargo tracking, insurance upon request and a full package of transport documents - bill of lading, waybills and others.
Questions and answers
Question 1、Are you a manufacturer or trading company? What is the minimum order quantity?
Answer:We are a manufacturer: we have our own workshops and testing equipment. The minimum order quantity is 1 ton, we invite customers to visit the production.
Question 2、Is it possible to develop customized recipes and cooperate on OEM/ODM?
Answer:yes, we develop specialized recipes for customer needs and provide OEM/ODM services - please contact us.
Question 3、How to choose the right product for your conditions?
Answer:Simply indicate the type of oil, target characteristics and conditions of use - our team will suggest a suitable brand within 2-3 business days. If you are in doubt about your choice, we accept trial orders in small quantities: you can first order a sample for testing.
contact us
Related Popular Products
L135 Di-nonyldiphenylamine
1、High-temperature amine antioxidant with increased resistance: based on diphenylamine, which at high temperatures continuously suppresses the late stage of oxidation of motor oil and lasts longer than conventional bulk-hindered phenols, increasing the oil change interval. 2、Good compatibility and synergistic effect. In combination with other aromatic amines and bulk-hindered phenols, mutual reinforcement occurs, making the product suitable for formulations of premium motor oils, thermal oils, transformer oils and greases. 3、Excellent thermal stability at high temperatures. As an additive for hydraulic oil, it is used in high-temperature hydraulic systems of injection molding machines and steel-casting machines; At the same time, it inhibits the growth of the acid number of transformer oil.
T2022 Additive package for two-stroke engine oils
1、To prepare two-stroke oil of the JASO FC class, only 2.2% (mass fraction when added to the oil) is sufficient - the dosage is highly economical, and bulk purchases allow you to effectively control the costs of the additive package and formulation. 2、Detergency and low smoke, high oil film strength: The product prevents clogging of the motorcycle exhaust system, reduces metal-to-metal wear, and extends engine life without loss of power. Suitable for oil for two-stroke engines with fuel injection and pre-mixing of fuel and oil. 3、Semi-synthetic two-stroke engine oil formulation, prepared with a small amount of polyisobutylene (molecular weight 1000) and a high flash point diluent, provides performance above the requirements of the Japanese JASO FC standard.
T106D (TBN400) High alkaline synthetic calcium sulfonate based on long chain linear alkylbenzene
1、We use long-chain (C₂₀–₂₄) linear alkylbenzenesulfonic acid as raw materials; The product is suitable for the manufacture of calcium sulfonate grease, has a strong neutralizing ability, as well as detergent-dispersant and anti-corrosion effects. 2、Ultra-high alkaline formula: alkaline number - not lower than 395 mg KOH/g, retention of alkaline number - not less than 98%. Even when operating on high-sulfur fuel, the product contains a sufficient supply of acid neutralization. 3、The main application is medium and high-quality motor oils, as well as marine oils; The recommended dosage is 0.5–25% (mass fraction).
T109D (TBN360) High alkaline calcium alkyl salicylate
1、High base number (340-380 mg KOH/g) and powerful acid neutralization: the product provides alkalinity reserve for heavy diesel oils, oils with extended drain intervals and operating conditions on high sulfur content fuels. 2、Excellent cleaning properties and thermal stability at high temperatures inhibit carbon deposits and varnish deposits on the piston; light color and low viscosity (≤50 mm²/s at 100 °C) simplify the introduction of the product into the formulation. 3、Good oil solubility, compatibility with sulfonates and hydrolytic stability facilitate compounding with other single additives; The product works effectively in combination with an antioxidant additive, extending oil life.
T8556 Organic molybdenum anti-friction additive
1、Energy saving: As a highly effective friction modifier, the product forms a boundary lubricating film on friction surfaces, which can significantly reduce the coefficient of friction, fuel consumption and cylinder wear. 2、Synergy of components: being a high-quality molybdenum additive, the product, when used together with antioxidant and anti-corrosion additives of the ZDDP series, as well as with aromatic amine antioxidants, gives a pronounced synergistic effect in terms of anti-wear and antioxidant properties. 3、Eco-friendly formulation: The product does not contain sulfur and phosphorus, has excellent oil solubility and, as an environmentally friendly molybdenum additive, is suitable for the production of high-quality gasoline and diesel engine oils and environmentally friendly lubricants, fully satisfying the most stringent environmental requirements.
High molecular weight emulsifier for emulsion explosives
1、The product is based on highly active polyisobutylene succinic anhydride; it is suitable for lines for the production of emulsion explosives of any configuration, characterized by small micelles and good emulsifying ability during use. 2、The emulsion explosives obtained on its basis are water-resistant and acid-resistant, stable during storage and have good pumpability; The recommended dosage is 1.0–2.0%. 3、The finished explosive emulsion is homogeneous and stable; The product is equally suitable for bulk and packaged lines. Production is localized, the supply chain is streamlined, which allows us to find a balance between quality, delivery time and the total cost of purchase.
T4209 Additive package for transmission oils
1、The additive is made from high-quality extreme pressure, anti-wear and anti-oxidation components and provides a complex effect: 75w90 gear oil and GL-4 gear oil derived from it under severe operating conditions - high-speed shock loads and high torque - effectively prevent scuffing, wear, pitting and peeling of teeth, as well as their corrosion. 2、Production is carried out using hermetic technology with intelligent control of the entire process: the deviation of key parameters does not exceed ±0.5%, the share of suitable products reaches 99.9%. Before shipment, each batch undergoes full control, a test report is attached to the delivery - the quality is fully controlled and traceable. 3、Products are produced in-house: five production lines provide an annual capacity of 60,000 tons. We accept trial orders, provide volume discounts and work under OEM/ODM schemes - this allows us to offer an individual solution with a balance between characteristics, delivery time and total purchase cost.
T106Z (TBN330) High alkaline synthetic calcium dialkylbenzenesulfonate for lubricants
1、Alkalinity number (according to KOH) - not less than 330 mg KOH/g (according to the SH/T 0251 method); The high ability to neutralize acids provides oils and greases with a sufficient supply of alkalinity. 2、Calcium nanocarbonate micelles stabilization technology: after sulfonation, calcium treatment and carbonization, a stable system is formed. The retention of the alkaline number is at least 98%, and the stability of the indicators from batch to batch is ensured at the technology level. 3、Special modification for grease: The product is mainly for the preparation of grease, and can be used in the preparation of high-temperature bearing grease and other greases.
T5065 Additive package for thermal oils
1、Contains a highly effective antioxidant and metal deactivator in combination with other additives. The package is specially designed for compounding thermal oils with an operating temperature of 250–300 °C: the finished product is distinguished by high thermal-oxidative stability and reliable anti-corrosion protection, and its service life is significantly increased. 2、Recommended dosage is 0.8-2.0%. When using base oils of groups II and III, the input rate can be reduced, which gives coolant oil manufacturers a flexible reserve to optimize the cost of the formulation. 3、Reliable delivery: shipment within 7-10 days after signing the contract and payment; sea, land and rail transportation, as well as multimodal schemes; delivery to Russia and Central Asia - about 15–20 days; Urgent shipment with end-to-end cargo tracking is possible.
T5033 Ashless anti-wear additive package for hydraulic oils
1、Ash-free formula based on high-quality anti-wear and ash-free antioxidant additives. Does not contain antifoam additives or viscosity depressants. Optimally suitable for preparing anti-wear hydraulic oils of the HVLP oil class. 2、Designed for high-load conditions: withstands the operation of plunger pumps at pressures above 30.0 MPa and vane pumps at 14.0–17.5 MPa. An ideal complex for the production of high-quality hydraulic oils, including HVLP 46 oils. 3、Easy to use: just add 1.5% of the package to the base oil to obtain a composition that complies with the GB11118.1-94 L-HM standard. Compatible with viscosities from N32 to N100, helping you consistently produce your entire range of HVLP oil-based products.
Zinc salt of dialkyldithiophosphoric acid based on secondary alkyl groups
1、Three effects in one additive: antioxidant, anti-wear and corrosion protection. Zinc dithiophosphate (zddp) inhibits oil oxidation, prevents bearing corrosion and reduces cam lifter wear, providing comprehensive, all-around engine oil protection. 2、Light yellow transparent liquid, flash point not lower than 160 °C. Mass fraction of sulfur 14.0–16.0%, phosphorus 6.5–8.0%, zinc 6.5–9.0%, pH - no less than 5.80. The product is manufactured according to the corporate standard Q/YHT006, undergoes full control before shipment, and a test report is attached to each batch. 3、Own production: 5 technological lines, annual capacity 60,000 tons. The deviation of key parameters is kept within ±0.5%, the share of suitable products is 99.9%. Consistent quality from batch to batch, a balanced combination of performance characteristics, delivery speed and total purchasing costs.
T2007A Polyisobutylene succinic anhydride
1、The product is produced by thermal addition method from highly reactive polyisobutylene (Mn = 1000) and does not contain chlorine; ashless dispersants based on it are distinguished by excellent cleaning properties at high temperatures and good sludge dispersion at low temperatures. 2、This is an intermediate product of the succinic anhydride class, obtained by thermal addition: density 950 kg/m³, flash point 180 °C, kinematic viscosity 800 mm²/s, total acid number 110 mg KOH/g. 3、One product - several directions: based on it, bis-/polyalkenylsuccinimide and borated ashless dispersants are produced, as well as emulsifiers for emulsion explosives and technological additives for petrochemical production.
T3259 Additive package for heavy-duty diesel engine oils
1、This diesel engine oil additive contains quality detergent additives and soot dispersant, which significantly improves detergency at high temperatures. 2、A thoughtful combination of high-temperature antioxidants and anti-oxidation and anti-corrosion additives ensures precise control of the engine oil base number (TBN): acidic combustion products are effectively neutralized, and the engine is reliably protected from corrosion. 3、The product is suitable for formulations of heavy diesel oils of classes CI-4 and below: the oil base number (TBN) reserve is maintained sufficiently, the antioxidant and anti-wear properties remain at a high level, and the oil change interval is extended.
T321Sulfided isobutylene
1、Excellent extreme durability and anti-wear properties, high sulfur content. Under load, it quickly forms an iron sulfide boundary film, effectively increasing the welding load. 2、Excellent solubility in oils. Suitable not only for all types of gear oils, but also as a high-quality additive in coolant that meets the requirements of heavy cutting conditions. 3、Wide scope of application. The recommended dosage is 1.5–5.0%. The product is widely used in the preparation of medium and high-grade gear oils, anti-friction hydraulic oils and greases; mixing is not difficult.
T9100 Additive package for four-stroke engine oils
1、Ready one-step formulation: with a dosage of only 6.5%, the package immediately meets the requirements of API SL and JASO MA2 - engine anti-wear protection and wet clutch friction properties are combined in one composition. 2、A complete set of functional components for recipe tasks. Base number 88.0–108 mg KOH/g; balanced calcium, zinc, phosphorus and nitrogen components provide a synergy of detergent, dispersant, antioxidant and anti-wear effects - the finished product is transparent and clean. 3、Possibility of flexible adjustment of viscosity classes. The package is compatible with non-dispersing viscosity additives and allows you to obtain a wide range of viscosity grades; production is carried out according to the Q/YHT004-2015 standard, each batch undergoes full control with a test report included.
T3358 Additive package for turbine oils
1、Compatible with viscosity grades 5W-30, 5W-40 and others, meets API SN, ILSAC GF-5 and JASO MA2 requirements. This additive package is the optimal solution for effective compounding. 2、At a dosage of 8.5%, it allows you to obtain all-season oils from base oils of groups II and III. As a specialized oil additive package, it has excellent detergent-dispersant properties. 3、Combines detergent additives, ashless dispersants and anti-oxidation/extreme pressure components. This engine oil additive package effectively suppresses the formation of sludge and varnish deposits, extending oil change intervals.