Products
-
T203 Zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
-
T5033 Ashless anti-wear additive package for hydraulic oils
-
T154A Polyisobutylene succinimide
-
T106Z (TBN330) High alkaline synthetic calcium dialkylbenzenesulfonate for lubricants
-
T202 Zinc salt of dialkyldithiophosphoric acid based on primary butyl and octyl groups
-
T3358 Additive package for turbine oils
-
T161B Borated high molecular weight polyisobutylene succinimide with high viscosity and high nitrogen content
-
L57 Octylbutyldiphenylamine
-
T5022 Anti-wear additive package for hydraulic oils
-
Zinc salt of dialkyldithiophosphoric acid based on secondary alkyl groups
-
L135 Di-nonyldiphenylamine
-
T4209 Additive package for transmission oils
-
T109D (TBN360) High alkaline calcium alkyl salicylate
-
High molecular weight emulsifier for emulsion explosives
-
T3259 Additive package for heavy-duty diesel engine oils
-
T9100 Additive package for four-stroke engine oils
T104A (TBN25) Synthetic low base number calcium alkyl benzene sulfonate
1、Low-alkaline synthetic additives for the production of oils with a high soap content combine detergent, anti-corrosion and anti-foam properties: thanks to the TBN 25 indicator, they are suitable for conventional motor oil formulations, and the finished oil is transparent and has an even light shade.
2、Alkali number - 20.0–35.0 mg/g, flash point - not lower than 180 °C; the product is manufactured according to the corporate standard Q/YHT003-2015 and undergoes full quality control upon leaving the factory - a test report is attached to each batch.
3、Production is localized on our own site with a developed supply chain: five production lines provide an annual capacity of 60,000 tons, which allows us to find a balance between quality, delivery speed and total procurement cost.
Description
marker
Product Description
T104A (TBN 25) - low-alkaline synthetic additives for the production of oils with a base number of TBN 25. The product provides good detergent-dispersant and anti-corrosion properties in motor oils and is intended mainly for their compounding at a recommended dosage of 0.5-3.0% (by weight). Detergent is the most widely used additive in motor oil formulations: the low-alkaline design of the product covers the needs of conventional motor oils for cleanliness and protection against corrosion, and in combination with ashless dispersants, it simultaneously provides the detergent and dispersant properties of the oil. The products comply with the corporate standard Q/YHT003-2015 and are supplied in 200 liter metal barrels, flexi tanks or ISO containers; should be stored in a dry, clean, ventilated warehouse. The maximum processing temperature is not higher than 60 °C, long-term storage temperature is not higher than 40 °C.
Customer pain points
When purchasing wholesale low-alkaline additives for the production of oils, the buyer is most concerned about the instability of the alkalinity number and detergent properties from batch to batch: if the key indicators of the supplied additive - the alkaline number and calcium content - “float” between batches, then motor oil prepared according to the same recipe does not consistently meet the standards.
Solution
We have introduced hermetic production technology with intelligent control of the entire process: key technological parameters are controlled with a deviation of no more than ±0.5%, and the share of suitable products reaches 99.9%. Before shipment, each batch is tested according to product indicators, as well as according to state and corporate standards, a test report is attached to the delivery - the quality is fully controlled and traceable.
Specifications
| Indicator | Norm | Test method |
| Appearance | Transparent brown-red liquid | Visual control |
| Density at 20 °C, kg/m³ | 920.0–980.0 | SH/T0604 |
| Flash point (open crucible), °C | Not lower than 180 | GB/T3536 |
| Kinematic viscosity at 100 °C, mm²/s | 13.00–25.00 | GB/T265 |
| Base number (in terms of KOH), mg/g | 20.0–35.0 | SH/T0251 |
| Calcium (mass fraction),% | 2.00–3.00 | Q/YHT003 Appendix A |
| Sulfur (mass fraction), % | 2.00–2.80 | SH/T0303 |
Note:Specific applicable standards, performance and applications are determined by the technical data sheet (TDS) and test report supplied with the product, as well as the results of customer formulation validation.
Applications
The product is designed for oil mixing plants and grease manufacturers and is used in the compounding of motor oils. Low-alkaline additives for the production of oils (TBN 25) provide the cleaning and anti-corrosion properties of conventional gasoline and diesel oils: they neutralize acidic products of fuel combustion, inhibit the formation of soot on pistons and varnish deposits. In combination with ashless dispersants, the additive simultaneously solves the problems of purity and dispersion.
The customer can select the product directly by oil type, engine or equipment operating mode and target characteristics; a team of developers and technical support is ready to help with selection, adaptation to a specific recipe and development of individual solutions.
About us
We are a fine chemicals manufacturer founded in April 2018, specializing in the development, production and sale of lubricating oil additives. We continuously improve formulations and production technology to meet customer needs and supply stable, cost-effective additives with accompanying technical support to lubricating oil manufacturers in China and abroad.
The company's own production site occupies approximately 46,667 m²: it operates five lines for the production of lubricating oil additives with an annual capacity of 60,000 tons, and the range includes more than 40 products. The company's staff exceeds 80 people: 12 engineering and technical specialists, 9 research and development employees and 45 production workers. Our technical team has provided services to companies such as Shell, BP, Castrol, Total, CNPC and Sinopec and is therefore intimately familiar with the products and requirements of the lubricating oil market.
Service and guarantees
We provide a full service cycle: we select the product according to operating parameters, oil type and target base number of the customer, provide free consultation and prepare a commercial proposal within 2-3 business days. Sample production takes 7–10 days, small-volume trial batches are possible. The order is put into production in 3–5 days and shipped in 7–10 days; if necessary, the deadlines are accelerated. Products are tested according to state and corporate standards, a test report is attached to the delivery, and inspection at the factory or by a third party is possible. The warranty period is determined by the contract; Remote technical support is provided, and disputed batches are sent for independent examination to a third-party laboratory. Payment - bank transfer (T/T); There are discounts for wholesale buyers, OEM/ODM channels are available.
Logistics and delivery
Standard shipment is in 200 liter barrels or in big bag containers according to export packaging: pallets and covers protect the containers from displacement, shock and moisture. Customer's logo printing, neutral packaging and fumigation-free plywood boxes are available; Labels and packing slips are included with the shipment. Delivery is carried out by sea, land and rail, as well as in mixed modes; We also work with the customer’s forwarder. Shipment - 7–10 days after signing the contract and receiving advance payment; Delivery time to Russia and Central Asia is about 15–20 days, urgent shipment is possible. We provide end-to-end cargo tracking, insurance upon request and a full package of transport documents - bill of lading, waybills and others.
Questions and answers
Question 1、What industries are the products used in?
Answer: Widely used in the oil and gas and chemical industries, mainly in the production of motor oils. Production is carried out using hermetically sealed technology with intelligent control of the entire process: the deviation of key parameters does not exceed ±0.5%, the share of suitable products is 99.9%. Detailed differences are given in the product data sheet.
Question 2、How to choose the right product for your conditions?
Answer: Simply indicate the type of oil, target base number (TBN) and application conditions - our team will suggest a suitable brand within 2-3 business days. If in doubt, you can first order a test sample.
Question 3、What series and sizes do you produce?
Answer: We offer standard and custom series: standard items are always in stock, special versions are produced upon request. A full list of specifications is provided along with the quotation.
Question 4、Are you a manufacturer or trading company? What is the minimum order quantity?
Answer: We are a manufacturer: we have our own workshops and testing equipment, the minimum order quantity is 1 ton, we invite customers to visit the production.
Question 5、Is customization and OEM/ODM possible?
Answer: Yes, we develop specialized recipes for customer needs and provide OEM/ODM services - please contact us.
contact us
Related Popular Products
T8556 Organic molybdenum anti-friction additive
1、Energy saving: As a highly effective friction modifier, the product forms a boundary lubricating film on friction surfaces, which can significantly reduce the coefficient of friction, fuel consumption and cylinder wear. 2、Synergy of components: being a high-quality molybdenum additive, the product, when used together with antioxidant and anti-corrosion additives of the ZDDP series, as well as with aromatic amine antioxidants, gives a pronounced synergistic effect in terms of anti-wear and antioxidant properties. 3、Eco-friendly formulation: The product does not contain sulfur and phosphorus, has excellent oil solubility and, as an environmentally friendly molybdenum additive, is suitable for the production of high-quality gasoline and diesel engine oils and environmentally friendly lubricants, fully satisfying the most stringent environmental requirements.
T204 Basic zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
1、High pH value. The product is a quality alkaline additive widely used for compounding anti-wear hydraulic oils, mid- and high-grade motor oils, and medium-speed marine oils. 2、Outstanding anti-wear properties. Under conditions of high loads and intense friction, this alkaline oil additive quickly forms a stable protective film, significantly reducing wear on metal surfaces and extending the service life of equipment. 3、Excellent compatibility. As a high-quality alkaline oil additive, the product is easily combined with base mono additives, including extreme pressure sulfur additives, and provides a synergistic effect in transmission and industrial gear oils.
T9100 Additive package for four-stroke engine oils
1、Ready one-step formulation: with a dosage of only 6.5%, the package immediately meets the requirements of API SL and JASO MA2 - engine anti-wear protection and wet clutch friction properties are combined in one composition. 2、A complete set of functional components for recipe tasks. Base number 88.0–108 mg KOH/g; balanced calcium, zinc, phosphorus and nitrogen components provide a synergy of detergent, dispersant, antioxidant and anti-wear effects - the finished product is transparent and clean. 3、Possibility of flexible adjustment of viscosity classes. The package is compatible with non-dispersing viscosity additives and allows you to obtain a wide range of viscosity grades; production is carried out according to the Q/YHT004-2015 standard, each batch undergoes full control with a test report included.
T205 Zinc salt of dialkyldithiophosphoric acid based on propyl, secondary and primary octyl groups
1、The product is synthesized on the basis of thiophosphoric acid obtained from a mixture of primary and secondary alcohols - propyl and octyl: due to the excellent anti-wear properties of the oil and high hydrolytic stability, it is the main additive in gasoline oil for anti-wear and antioxidant protection of high-quality motor oils. 2、The content of sulfur, phosphorus and zinc - 16.00-18.50%, 8.00-9.50% and 9.00-10.80%, respectively - is maintained according to the corporate standard Q/YHT006-2015; Each batch undergoes full control at the exit from the factory, a test report is attached to the delivery, so the lubricating properties of the oil are stable from batch to batch. 3、Multifunctional base anti-wear additive with four functions - anti-oxidation, anti-wear, extreme pressure and anti-corrosion: protects the camshaft, tappets and cylinder liners, and is suitable for compounding high-quality motor oils with additives into gasoline oil.
L57 Octylbutyldiphenylamine
1、High anti-oxidation efficiency at high temperatures. Significantly increases the thermal stability of hot oils, effectively inhibits the increase in viscosity in high-quality motor oils and extends the drain interval. 2、Excellent compatibility. In composition with aromatic amines and sterically hindered phenols, it exhibits a synergistic effect. It is a basic component of high-quality additives for hydraulic oils. 3、Excellent high temperature thermal stability. The liquid form is convenient for dosing. Suitable for turbine oils, coolants and other industrial oils, ensuring trouble-free long-term operation of equipment.
T165A High molecular weight polyisobutylene succinimide
1、High molecular weight ashless dispersing agent with a nitrogen content of at least 1.90%: the product is obtained using thermal addition technology, it holds soot and sludge in suspension well, and is especially effective in dispersing low-temperature sludge. 2、Does not contain chlorine, alkaline number is not lower than 40.0 mg KOH/g; is produced according to the corporate standard Q/YHT007-2015 and is suitable for formulations of high-quality gasoline oils of API SH level and higher. 3、Based on highly active polyisobutylene and thermal joining technology: the product copes well with low-temperature sludge and soot, provides good detergent-dispersant efficiency and covers the needs for compounding oils of API SH class and higher.
T154A Polyisobutylene succinimide
1、Ashless succinimide additive made from highly reactive polyisobutylene (Mn=1000) using thermal addition technology: the product does not contain chlorine and inhibits the formation of carbon deposits on pistons and varnish deposits. 2、Excellent detergent-dispersant properties: soot, sludge and varnish precursors formed during fuel combustion are kept suspended in the oil, which prevents varnish deposits from settling in the engine on the piston rings, in the oil passages and on the valve mechanism. 3、Suitable for compounding medium and high quality diesel and gasoline motor oils, as well as cylinder oils for low speed crosshead marine engines; especially recommended for environmentally friendly motor oils. The recommended dosage is 2.0–4.0% (by weight).
T2022 Additive package for two-stroke engine oils
1、To prepare two-stroke oil of the JASO FC class, only 2.2% (mass fraction when added to the oil) is sufficient - the dosage is highly economical, and bulk purchases allow you to effectively control the costs of the additive package and formulation. 2、Detergency and low smoke, high oil film strength: The product prevents clogging of the motorcycle exhaust system, reduces metal-to-metal wear, and extends engine life without loss of power. Suitable for oil for two-stroke engines with fuel injection and pre-mixing of fuel and oil. 3、Semi-synthetic two-stroke engine oil formulation, prepared with a small amount of polyisobutylene (molecular weight 1000) and a high flash point diluent, provides performance above the requirements of the Japanese JASO FC standard.
T202 Zinc salt of dialkyldithiophosphoric acid based on primary butyl and octyl groups
1、The raw materials and technology are transparent: the product is obtained from thiophosphoric acid, synthesized on the basis of butanol and octanol. It combines antioxidant, anti-wear and anti-corrosion effects and is suitable for motor, transmission and hydraulic oil formulations. 2、The product is suitable for compounding transmission oils and is considered as one of the options when selecting additives for transmission oils; recommended dosage is 0.5–3.0% (by weight). 3、Thermal stability is at a good level: the flash point in an open crucible is not lower than 180 °C, and the content of sulfur, phosphorus and zinc is standardized by clear indicators, which simplifies the selection according to the technical data sheet and the target recipe.
T2007A Polyisobutylene succinic anhydride
1、The product is produced by thermal addition method from highly reactive polyisobutylene (Mn = 1000) and does not contain chlorine; ashless dispersants based on it are distinguished by excellent cleaning properties at high temperatures and good sludge dispersion at low temperatures. 2、This is an intermediate product of the succinic anhydride class, obtained by thermal addition: density 950 kg/m³, flash point 180 °C, kinematic viscosity 800 mm²/s, total acid number 110 mg KOH/g. 3、One product - several directions: based on it, bis-/polyalkenylsuccinimide and borated ashless dispersants are produced, as well as emulsifiers for emulsion explosives and technological additives for petrochemical production.
T109D (TBN360) High alkaline calcium alkyl salicylate
1、High base number (340-380 mg KOH/g) and powerful acid neutralization: the product provides alkalinity reserve for heavy diesel oils, oils with extended drain intervals and operating conditions on high sulfur content fuels. 2、Excellent cleaning properties and thermal stability at high temperatures inhibit carbon deposits and varnish deposits on the piston; light color and low viscosity (≤50 mm²/s at 100 °C) simplify the introduction of the product into the formulation. 3、Good oil solubility, compatibility with sulfonates and hydrolytic stability facilitate compounding with other single additives; The product works effectively in combination with an antioxidant additive, extending oil life.
T161B Borated high molecular weight polyisobutylene succinimide with high viscosity and high nitrogen content
1、Compatible with the formulations of gasoline motor oils of API SG classes and higher, as well as API CF-4 diesel oils and higher; especially in demand in environmentally friendly motor oil formulas. The recommended dosage is 2.0–5.0% (by weight). 2、Effectively inhibits the growth of engine oil viscosity, combines anti-oxidation and anti-wear properties, improves oil compatibility with fluorine rubber seals and reduces high-temperature corrosion of copper-lead liners. The product does not contain chlorine. 3、Own production: five lines with an annual capacity of 60,000 tons, deviation of key parameters - no more than ±0.5%, share of suitable products - 99.9%. We maintain a balance between characteristics, delivery times and the total cost of the purchase.
T203 Zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
1、The additive is made from thiophosphoric acid obtained on the basis of octanol: the structure of the zinc salt provides excellent thermal stability and reliable anti-wear and antioxidant protection in medium and high-class diesel oils, featuring high thermal-oxidative stability. 2、Hydrolytic stability and antioxidant properties are excellent: the content of sulfur, phosphorus and zinc is strictly controlled according to corporate standards, the flash point is not lower than 180 ° C, so the product is suitable for anti-wear hydraulic oil formulations as hydraulic oil additives. 3、Each batch undergoes full control according to the corporate standard Q/YHT006-2015 and is accompanied by a test report; As a gear oil additive, the product is stable from batch to batch and helps balance costs when purchasing in bulk.
T107 (TBN400) Highly alkaline synthetic magnesium sulfonate based on long-chain linear alkylbenzene
1、Low ash content. As a magnesium sulfonate detergent, the product effectively controls oil ash content: with a TBN of at least 395 mg KOH/g, it has excellent acid suppression properties and is an ideal base ingredient for the preparation of low ash oils. 2、Low turbidity and low sediment value: the product significantly reduces the deposition of impurities during oil storage and operation, reducing filtration costs and the risk of equipment clogging. 3、Detergency and corrosion protection: The additive is made from long-chain (C20-24) linear alkylbenzenesulfonic acid and provides good detergent, dispersant and anti-corrosion properties.
T106D (TBN400) High alkaline synthetic calcium sulfonate based on long chain linear alkylbenzene
1、We use long-chain (C₂₀–₂₄) linear alkylbenzenesulfonic acid as raw materials; The product is suitable for the manufacture of calcium sulfonate grease, has a strong neutralizing ability, as well as detergent-dispersant and anti-corrosion effects. 2、Ultra-high alkaline formula: alkaline number - not lower than 395 mg KOH/g, retention of alkaline number - not less than 98%. Even when operating on high-sulfur fuel, the product contains a sufficient supply of acid neutralization. 3、The main application is medium and high-quality motor oils, as well as marine oils; The recommended dosage is 0.5–25% (mass fraction).
T5033 Ashless anti-wear additive package for hydraulic oils
1、Ash-free formula based on high-quality anti-wear and ash-free antioxidant additives. Does not contain antifoam additives or viscosity depressants. Optimally suitable for preparing anti-wear hydraulic oils of the HVLP oil class. 2、Designed for high-load conditions: withstands the operation of plunger pumps at pressures above 30.0 MPa and vane pumps at 14.0–17.5 MPa. An ideal complex for the production of high-quality hydraulic oils, including HVLP 46 oils. 3、Easy to use: just add 1.5% of the package to the base oil to obtain a composition that complies with the GB11118.1-94 L-HM standard. Compatible with viscosities from N32 to N100, helping you consistently produce your entire range of HVLP oil-based products.