Products
-
T3358 Additive package for turbine oils
-
T5033 Ashless anti-wear additive package for hydraulic oils
-
T2007A Polyisobutylene succinic anhydride
-
T106A (TBN300) High alkaline linear alkyl benzene sulfonate calcium
-
T107 (TBN400) Highly alkaline synthetic magnesium sulfonate based on long-chain linear alkylbenzene
-
L135 Di-nonyldiphenylamine
-
T203 Zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
-
T204 Basic zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
-
T109D (TBN360) High alkaline calcium alkyl salicylate
-
T5065 Additive package for thermal oils
-
T104A (TBN25) Synthetic low base number calcium alkyl benzene sulfonate
-
T161B Borated high molecular weight polyisobutylene succinimide with high viscosity and high nitrogen content
-
T154A Polyisobutylene succinimide
-
Zinc salt of dialkyldithiophosphoric acid based on secondary alkyl groups
-
T165A High molecular weight polyisobutylene succinimide
-
High molecular weight emulsifier for emulsion explosives
T8556 Organic molybdenum anti-friction additive
1、Energy saving: As a highly effective friction modifier, the product forms a boundary lubricating film on friction surfaces, which can significantly reduce the coefficient of friction, fuel consumption and cylinder wear.
2、Synergy of components: being a high-quality molybdenum additive, the product, when used together with antioxidant and anti-corrosion additives of the ZDDP series, as well as with aromatic amine antioxidants, gives a pronounced synergistic effect in terms of anti-wear and antioxidant properties.
3、Eco-friendly formulation: The product does not contain sulfur and phosphorus, has excellent oil solubility and, as an environmentally friendly molybdenum additive, is suitable for the production of high-quality gasoline and diesel engine oils and environmentally friendly lubricants, fully satisfying the most stringent environmental requirements.
Description
marker
Product Description
T8556 is an oil-soluble molybdenum additive that is excellent at reducing oil friction and wear. As a highly effective friction modifier, it plays a key role in motor oils for internal combustion engines. The product does not contain sulfur and phosphorus and is an ideal environmentally friendly molybdenum additive. The recommended dosage is 0.1–3.0% by weight of the oil. The additive is widely used in the production of high-quality gasoline motor oils, diesel crankcase oils, greases and any environmentally friendly lubricants.
What concerns lubricant manufacturers most when purchasing friction-reducing additives - compatibility and mismatch?
As environmental standards become more stringent, oil manufacturers are increasingly faced with problems when developing low-viscosity, energy-saving oils for internal combustion engines: insufficient anti-wear properties of the oil and inconsistency in fuel efficiency indicators. If the selected friction modifier is poorly compatible with the antioxidant and anti-corrosion additives in the formulation (such as ZDDP), not only will it not reduce friction, but it can lead to additive precipitation, oil cloudiness, and even abnormal engine wear.
Our solution：
The T8556 additive we offer is a high-quality additive with molybdenum, which, thanks to a special oil-solubility technology, provides good synergism of anti-wear and antioxidant effects with ZDDP series additives and aromatic amine antioxidants. Being a high-quality molybdenum additive, it does not contain sulfur and phosphorus and eliminates the risk of poisoning exhaust gas aftertreatment systems typical of traditional additives. In addition, the molybdenum content of 5.50–8.00% guarantees excellent anti-wear effect under extreme load conditions.
Product Specifications
| Indicator | Norm | Test method |
| Appearance | Transparent brown-red liquid | Visual inspection |
| Density at 20 °C, kg/m³ | 950.0–1100.0 | SH/T0604 |
| Flash point (open crucible), °C | ≥180 | GB/T3536 |
| Kinematic viscosity at 100 °C, mm²/s | 90.00–180.0 | GB/T265 |
| Base number (in terms of KOH), mg/g | 15.0–35.0 | SH/T0251 |
| Mass fraction of molybdenum, % | 5.50–8.00 | Q/YHT001, Appendix A |
Note:the product is manufactured according to the corporate standard Q/YHT017-2015. Current standards, quality indicators and areas of application are determined by the technical data sheet (TDS) and test report attached to each batch, as well as the results of customer formulation testing.
Product Application Areas
T8556 is suitable for the production of high quality gasoline motor oils, diesel crankcase oils and greases, as well as a variety of environmentally friendly lubricants. Typical application scenarios:
(1) Energy-efficient gasoline motor oils and diesel oils with extended drain intervals - to reduce fuel consumption and reduce cylinder wear: in these formulations, the molybdenum additive provides continuous low-friction protection.
(2) Motor oils for passenger cars: a friction modifier is added to the composition and, in combination with low-viscosity oil, provides noticeable fuel savings.
(3) Motorcycle Oils: Used in four-stroke motorcycle oils improves clutch and cylinder longevity - molybdenum additive maintains boundary film stability over repeated clutch engagements.
(4) Industrial Gear and Hydraulic Oils: At high loads and low speeds, reduce friction on tooth surfaces and reduce energy consumption - a friction modifier improves boundary lubrication under these operating conditions.
(5) Greases and environmentally friendly lubricants: applied to the production of greases that provide boundary lubrication; Due to the absence of sulfur and phosphorus, molybdenum additive is also suitable for the production of various environmentally friendly lubricants, and in combination with aromatic amine antioxidants and ZDDP it provides both antioxidant and anti-wear synergy.
About the company
The company was founded in April 2018. The area of our own production complex is about 46,667 m². The company operates 5 lines for the production of lubricating oil additives; annual capacity is 60,000 tons, the range includes more than 40 types of additives. The company has over 80 employees, including 12 chief engineers and technical specialists, 9 developers and 45 operators. Our technical team has provided services to companies such as Shell, BP, Castrol, Total, CNPC and Sinopec and is therefore very familiar with lubricant requirements and applications. As a professional molybdenum additive supplier, we understand how important molybdenum additive is for energy-saving formulations and are ready to offer customized technical support.
Service and guarantees
(1) Pre-sale technical consultations: selection of additives taking into account the type of oil, operating conditions and target characteristics; consultations are free, a commercial proposal is sent within 2-3 business days after receiving full parameters.
(2) Samples and trial batches: sample production time is 7-10 days; We accept trial orders of small volumes so that you can check the characteristics and stability of the product before starting serial purchases.
(3) Ordering and production: production starts in 3-5 days after order confirmation, shipment in 7-10 days; Urgent release possible. We provide photos and videos from production, third party inspection or inspection directly at our factory is allowed.
(4) Pre-shipment inspection: products are tested for quality indicators and in accordance with government and corporate standards; Each batch is accompanied by a test report - quality is controlled and traceable.
(5) After-sales service and payment: we provide remote technical support; controversial samples are sent for examination to an independent organization - the decision is made objectively and transparently. Payment - bank transfer (T/T); Discounts apply for bulk purchases; Work under OEM/ODM schemes is possible.
Logistics and transportation
Packing:by default - export standard packaging: 200 l metal drums or container barrels (IBC). The outer packaging is completed with pallets and protective covers, which prevents the barrels from rolling, bumping and getting wet during transportation. Wooden sheathing without fumigation, neutral packaging and application of the customer’s logo are possible; Each lot comes with labels and a packing slip.
Transportation:sea, land, rail and multimodal transportation; We work with forwarders specified by the customer.
Dates:shipment for standard orders - within 7–10 days after signing the contract and receiving advance payment; Delivery to Russia and Central Asian countries takes about 15–20 days; Urgent shipment is possible.
Frequently Asked Questions
Question 1、Is the product environmentally friendly? Does it contain sulfur, phosphorus or other elements?
Answer:The product is an environmentally friendly additive and does not contain sulfur and phosphorus. As an environmentally friendly product, it eliminates the risk of exhaust gas aftertreatment system poisoning associated with traditional additives and is particularly suitable for the production of environmentally friendly lubricants with stringent requirements and low ash formulations.
Question 2、How to choose a brand suitable for our operating conditions?
Answer:the customer just needs to indicate the type of oil, conditions of use and target indicators - our team will offer a suitable brand within 2-3 business days.
Question 3、Are you a manufacturer or trading company? What is the minimum order quantity?
Answer:We are a manufacturer with our own production workshops and testing equipment. The minimum order quantity is one ton. We invite customers to visit our factory.
Question 4、How does the product work in combination with other lubricating oil additives (such as ZDDP)?
Answer:As a highly effective molybdenum additive, the product, when used together with antioxidant and anti-corrosion additives of the ZDDP series, provides good anti-wear synergism, and in combination with aromatic amine antioxidants - pronounced antioxidant synergism. The mass fraction of molybdenum reaches 5.50–8.00%, which significantly increases the complex characteristics of the oil and helps manufacturers stabilize the formulation.
contact us
Related Popular Products
Zinc salt of dialkyldithiophosphoric acid based on secondary alkyl groups
1、Three effects in one additive: antioxidant, anti-wear and corrosion protection. Zinc dithiophosphate (zddp) inhibits oil oxidation, prevents bearing corrosion and reduces cam lifter wear, providing comprehensive, all-around engine oil protection. 2、Light yellow transparent liquid, flash point not lower than 160 °C. Mass fraction of sulfur 14.0–16.0%, phosphorus 6.5–8.0%, zinc 6.5–9.0%, pH - no less than 5.80. The product is manufactured according to the corporate standard Q/YHT006, undergoes full control before shipment, and a test report is attached to each batch. 3、Own production: 5 technological lines, annual capacity 60,000 tons. The deviation of key parameters is kept within ±0.5%, the share of suitable products is 99.9%. Consistent quality from batch to batch, a balanced combination of performance characteristics, delivery speed and total purchasing costs.
T154A Polyisobutylene succinimide
1、Ashless succinimide additive made from highly reactive polyisobutylene (Mn=1000) using thermal addition technology: the product does not contain chlorine and inhibits the formation of carbon deposits on pistons and varnish deposits. 2、Excellent detergent-dispersant properties: soot, sludge and varnish precursors formed during fuel combustion are kept suspended in the oil, which prevents varnish deposits from settling in the engine on the piston rings, in the oil passages and on the valve mechanism. 3、Suitable for compounding medium and high quality diesel and gasoline motor oils, as well as cylinder oils for low speed crosshead marine engines; especially recommended for environmentally friendly motor oils. The recommended dosage is 2.0–4.0% (by weight).
T109D (TBN360) High alkaline calcium alkyl salicylate
1、High base number (340-380 mg KOH/g) and powerful acid neutralization: the product provides alkalinity reserve for heavy diesel oils, oils with extended drain intervals and operating conditions on high sulfur content fuels. 2、Excellent cleaning properties and thermal stability at high temperatures inhibit carbon deposits and varnish deposits on the piston; light color and low viscosity (≤50 mm²/s at 100 °C) simplify the introduction of the product into the formulation. 3、Good oil solubility, compatibility with sulfonates and hydrolytic stability facilitate compounding with other single additives; The product works effectively in combination with an antioxidant additive, extending oil life.
T5065 Additive package for thermal oils
1、Contains a highly effective antioxidant and metal deactivator in combination with other additives. The package is specially designed for compounding thermal oils with an operating temperature of 250–300 °C: the finished product is distinguished by high thermal-oxidative stability and reliable anti-corrosion protection, and its service life is significantly increased. 2、Recommended dosage is 0.8-2.0%. When using base oils of groups II and III, the input rate can be reduced, which gives coolant oil manufacturers a flexible reserve to optimize the cost of the formulation. 3、Reliable delivery: shipment within 7-10 days after signing the contract and payment; sea, land and rail transportation, as well as multimodal schemes; delivery to Russia and Central Asia - about 15–20 days; Urgent shipment with end-to-end cargo tracking is possible.
T203 Zinc salt of dialkyldithiophosphoric acid based on two primary octyl groups
1、The additive is made from thiophosphoric acid obtained on the basis of octanol: the structure of the zinc salt provides excellent thermal stability and reliable anti-wear and antioxidant protection in medium and high-class diesel oils, featuring high thermal-oxidative stability. 2、Hydrolytic stability and antioxidant properties are excellent: the content of sulfur, phosphorus and zinc is strictly controlled according to corporate standards, the flash point is not lower than 180 ° C, so the product is suitable for anti-wear hydraulic oil formulations as hydraulic oil additives. 3、Each batch undergoes full control according to the corporate standard Q/YHT006-2015 and is accompanied by a test report; As a gear oil additive, the product is stable from batch to batch and helps balance costs when purchasing in bulk.
L135 Di-nonyldiphenylamine
1、High-temperature amine antioxidant with increased resistance: based on diphenylamine, which at high temperatures continuously suppresses the late stage of oxidation of motor oil and lasts longer than conventional bulk-hindered phenols, increasing the oil change interval. 2、Good compatibility and synergistic effect. In combination with other aromatic amines and bulk-hindered phenols, mutual reinforcement occurs, making the product suitable for formulations of premium motor oils, thermal oils, transformer oils and greases. 3、Excellent thermal stability at high temperatures. As an additive for hydraulic oil, it is used in high-temperature hydraulic systems of injection molding machines and steel-casting machines; At the same time, it inhibits the growth of the acid number of transformer oil.
T161B Borated high molecular weight polyisobutylene succinimide with high viscosity and high nitrogen content
1、Compatible with the formulations of gasoline motor oils of API SG classes and higher, as well as API CF-4 diesel oils and higher; especially in demand in environmentally friendly motor oil formulas. The recommended dosage is 2.0–5.0% (by weight). 2、Effectively inhibits the growth of engine oil viscosity, combines anti-oxidation and anti-wear properties, improves oil compatibility with fluorine rubber seals and reduces high-temperature corrosion of copper-lead liners. The product does not contain chlorine. 3、Own production: five lines with an annual capacity of 60,000 tons, deviation of key parameters - no more than ±0.5%, share of suitable products - 99.9%. We maintain a balance between characteristics, delivery times and the total cost of the purchase.
T151B Borated polyisobutylene succinimide
1、Chlorine-free, ashless borated dispersant: The product has excellent detergent-dispersant ability, combines anti-oxidation and anti-wear properties, and improves oil compatibility with fluorine rubber seals. 2、T151B is used in the compounding of automatic transmission fluids (ATF) and other products, including automatic transmission additives: providing a detergent-dispersant effect, it helps control friction characteristics and reduces high-temperature corrosion of copper-lead liners. 3、Excellent formulation compatibility: In combination with detergent additives, the product is used in marine diesel and industrial oils; Small additives to transmission and hydraulic oils improve control of oxidative deposits during long-term operation.
T104A (TBN25) Synthetic low base number calcium alkyl benzene sulfonate
1、Low-alkaline synthetic additives for the production of oils with a high soap content combine detergent, anti-corrosion and anti-foam properties: thanks to the TBN 25 indicator, they are suitable for conventional motor oil formulations, and the finished oil is transparent and has an even light shade. 2、Alkali number - 20.0–35.0 mg/g, flash point - not lower than 180 °C; the product is manufactured according to the corporate standard Q/YHT003-2015 and undergoes full quality control upon leaving the factory - a test report is attached to each batch. 3、Production is localized on our own site with a developed supply chain: five production lines provide an annual capacity of 60,000 tons, which allows us to find a balance between quality, delivery speed and total procurement cost.
T9100 Additive package for four-stroke engine oils
1、Ready one-step formulation: with a dosage of only 6.5%, the package immediately meets the requirements of API SL and JASO MA2 - engine anti-wear protection and wet clutch friction properties are combined in one composition. 2、A complete set of functional components for recipe tasks. Base number 88.0–108 mg KOH/g; balanced calcium, zinc, phosphorus and nitrogen components provide a synergy of detergent, dispersant, antioxidant and anti-wear effects - the finished product is transparent and clean. 3、Possibility of flexible adjustment of viscosity classes. The package is compatible with non-dispersing viscosity additives and allows you to obtain a wide range of viscosity grades; production is carried out according to the Q/YHT004-2015 standard, each batch undergoes full control with a test report included.
T165A High molecular weight polyisobutylene succinimide
1、High molecular weight ashless dispersing agent with a nitrogen content of at least 1.90%: the product is obtained using thermal addition technology, it holds soot and sludge in suspension well, and is especially effective in dispersing low-temperature sludge. 2、Does not contain chlorine, alkaline number is not lower than 40.0 mg KOH/g; is produced according to the corporate standard Q/YHT007-2015 and is suitable for formulations of high-quality gasoline oils of API SH level and higher. 3、Based on highly active polyisobutylene and thermal joining technology: the product copes well with low-temperature sludge and soot, provides good detergent-dispersant efficiency and covers the needs for compounding oils of API SH class and higher.
T3259 Additive package for heavy-duty diesel engine oils
1、This diesel engine oil additive contains quality detergent additives and soot dispersant, which significantly improves detergency at high temperatures. 2、A thoughtful combination of high-temperature antioxidants and anti-oxidation and anti-corrosion additives ensures precise control of the engine oil base number (TBN): acidic combustion products are effectively neutralized, and the engine is reliably protected from corrosion. 3、The product is suitable for formulations of heavy diesel oils of classes CI-4 and below: the oil base number (TBN) reserve is maintained sufficiently, the antioxidant and anti-wear properties remain at a high level, and the oil change interval is extended.
L57 Octylbutyldiphenylamine
1、High anti-oxidation efficiency at high temperatures. Significantly increases the thermal stability of hot oils, effectively inhibits the increase in viscosity in high-quality motor oils and extends the drain interval. 2、Excellent compatibility. In composition with aromatic amines and sterically hindered phenols, it exhibits a synergistic effect. It is a basic component of high-quality additives for hydraulic oils. 3、Excellent high temperature thermal stability. The liquid form is convenient for dosing. Suitable for turbine oils, coolants and other industrial oils, ensuring trouble-free long-term operation of equipment.
T2007A Polyisobutylene succinic anhydride
1、The product is produced by thermal addition method from highly reactive polyisobutylene (Mn = 1000) and does not contain chlorine; ashless dispersants based on it are distinguished by excellent cleaning properties at high temperatures and good sludge dispersion at low temperatures. 2、This is an intermediate product of the succinic anhydride class, obtained by thermal addition: density 950 kg/m³, flash point 180 °C, kinematic viscosity 800 mm²/s, total acid number 110 mg KOH/g. 3、One product - several directions: based on it, bis-/polyalkenylsuccinimide and borated ashless dispersants are produced, as well as emulsifiers for emulsion explosives and technological additives for petrochemical production.
T205 Zinc salt of dialkyldithiophosphoric acid based on propyl, secondary and primary octyl groups
1、The product is synthesized on the basis of thiophosphoric acid obtained from a mixture of primary and secondary alcohols - propyl and octyl: due to the excellent anti-wear properties of the oil and high hydrolytic stability, it is the main additive in gasoline oil for anti-wear and antioxidant protection of high-quality motor oils. 2、The content of sulfur, phosphorus and zinc - 16.00-18.50%, 8.00-9.50% and 9.00-10.80%, respectively - is maintained according to the corporate standard Q/YHT006-2015; Each batch undergoes full control at the exit from the factory, a test report is attached to the delivery, so the lubricating properties of the oil are stable from batch to batch. 3、Multifunctional base anti-wear additive with four functions - anti-oxidation, anti-wear, extreme pressure and anti-corrosion: protects the camshaft, tappets and cylinder liners, and is suitable for compounding high-quality motor oils with additives into gasoline oil.
T115B (TBN250) High alkaline sulfided calcium alkyl phenate
1、High acid-neutralizing ability: base number - 245–265 mg KOH/g. The product is used in the manufacture of medium and high-class motor oils, especially turbodiesel, and helps control the formation of carbon deposits on the piston. 2、Recommended dosages are clearly specified: 0.5-4.0% for motor oils and 25-35% for marine cylinder oil (mass fraction). The additive is easily added to the formulation and is compatible with other detergent additives and ashless dispersants. 3、We use a closed technological scheme and intelligent control at all stages of production: fluctuations in key parameters do not exceed ±0.5%, the share of quality products reaches 99.9%. Custom manufacturing (OEM/ODM) and test samples are available.